Professional Documents
Culture Documents
TERMINAL BLOCKS A-B 1492-pp020
TERMINAL BLOCKS A-B 1492-pp020
#2...#14
1492-PDME1111 #2...#14 1 0.323 1 0.323
115 UL Listed UL
1953
1492-PDME1141 #2...#14 1 0.312 #10...#14 4 0.156
1492-PDE1112
2/0...#14 0.531 2/0...#14 1 0.531
1492-PDE1C112* 1
200 UL Listed to
1492-PDE1142 UL 1953
v 2/0...#14 0.531 2#...#14 4 0.312
1492-PDE1C142* 1
1492-PDE1225
510 250 … #6 2 0.72 250...#6 2 0.72
1492-PDE1C255* UL
Recognized
1492-PDE1183 to UL 1059
(1) 400...#6
335 1 .94 .72 #2...#14 8 0.5
1492-PDE1C183* (1) 2/0...#14
* The C in the catalog number designates copper terminals. Catalog numbers without the C have aluminum connectors.
* The C in the catalog number designates copper terminals. Catalog numbers without the C have aluminum connectors
Short-Circuit Current Rating (SCCR) Conditions - Terminal blocks are considered suitable for use on a circuit capable of delivering not more than the stated SCCR at the maximum voltage
specified when protected by the maximum ampere and class of overcurrent protective device as noted in the chart above.
# Short-Circuit Current Rating (SCCR) when noted additional conditions are provided. When larger overcurrent protection devices of type, or wire of different size is used, the Power
Terminal block has a 10,000 amp withstand rating. NOTE the rated wire range of terminals may exceed the restrictive wire range used to provide higher SCCR.
λ Size Range of Line and Load conductors suitable to maintain noted SCCR.
ϕ Maximum Size of the Line Side overcurrent protection to provide noted SCCR.
Accessories
Feeder Spacing Adapter Plate: Used with single pole Allen-Bradley UL Recognized power terminal blocks to increase terminal spacing for Feeder Circuit Applications. This includes spacing
requirements from Phase-to-Phase as well as Phase-to-Ground.
Publication 1492-PP020B-EN-P – September 2011 Copyright © 2011 Rockwell Automation, Inc. All Rights Reserved. Printed in USA.
Supersedes Publication 1492-PP020A-EN-E – DECEMBER 2007