Professional Documents
Culture Documents
Motor Control and Accessories
Motor Control and Accessories
MOTOR CONTROL
AND ACCESSORIES
For extended & complete range visit www.voltex.co.za. Minimum quantity orders may apply. Dimensions generally shown in mm and subject to technical change. Voltex codes and descriptions have been used above. Use Voltex K8 codes and
product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue. VOLTEX CATALOGUE 101
MOTOR CONTROL AND ACCESSORIES
CONTACTORS
Miniature Contactors AC+DC
Rated Current
Dimensions
380~440V
Coil Voltage
Type Frame Product Code
WxHxD KW AMP AMP 50/60Hz
(mm) AC3 AC1 AC3
AC24V D3783
AC48V D3784
AC110V D3785
GMC-6M 45x58x57 2.2KW 20A 6A
3-Pole 6A AC3 AC240V -
Auxiliary:
1NO or 1NC AC400V D3786
Ue: 690V AC550V -
Ui: 690V
Uimp: 6KV DC12V -
DC24V -
GMD-6M 45x58x69 2.2KW 20A 6A
DC48V -
DC110V -
AC24V D3792
AC48V D3793
AC110V D3794
GMC-9M 45x58x57 4KW 20A 9A
3-Pole 9A AC3 AC240V D3836
Auxiliary:
1NO or 1NC AC400V D6321
Ue: 690V AC550V D3795
Ui: 690V
Uimp: 6KV DC12V -
DC24V D3858
GMD-9M 45x58x69 4KW 20A 9A
DC48V -
DC110V -
AC24V D3807
AC48V D3805
AC110V D3809
GMC-12M 45x58x57 5.5KW 20A 12A
3-Pole 12A AC3 AC240V D2502
Auxiliary:
1NO or 1NC AC400V D3804
Ue: 690V AC550V D3806
Ui: 690V
Uimp: 6KV DC12V D3822
DC24V A2349
GMD-12M 45x58x69 5.5KW 20A 12A
DC48V -
DC110V -
AC24V D7499
AC48V D3816
AC110V D3817
GMC-16M 45x58x57 7.5KW 20A 16A
3-Pole 16A AC3 AC240V D2503
Auxiliary:
1NO or 1NC AC400V D3826
Ue: 690V AC550V D3818
Ui: 690V
Uimp: 6KV DC12V -
DC24V -
GMD-16M 45x58x69 7.5KW 20A 16A
DC48V -
DC110V -
Note:
• Items above with (-) in the codes column are available on special request
For extended & complete range visit www.voltex.co.za. Minimum quantity orders may apply. Dimensions generally shown in mm and subject to technical change. Voltex codes and descriptions have been used above. Use Voltex K8 codes and
102 VOLTEX CATALOGUE product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue.
MOTOR CONTROL AND ACCESSORIES
CONTACTORS
Miniature Thermal Overload
Rated Current
Applied To AC3 380~440VAC Product
Type Model
Product Code
Mid range In AMP Range In AMP
0.21A 0.16 - 0.25A D160
6.5A 5 - 8A D167
7.5A 6 - 9A D2775
1NO D4303
1NC D4304
ON-DELAY IN D2422
AC/DC 24-48V
OFF-DELAY IF D7749
Electronic Front
GMC-6 ~ 16M
Mount Timer AT-12M
GMD-6 ~ 16M
0.1-30 seconds
ON-DELAY 2N D1834
AC100-220V
OFF-DELAY 2F D7750
GMC-6 ~ 16M
Interlock Device AR-12M MINI-CONTACTOR INTERLOCK UNIT D211
GMD-6 ~ 16M
Note:
• Items above with (-) in the codes column are available on special request
For extended & complete range visit www.voltex.co.za. Minimum quantity orders may apply. Dimensions generally shown in mm and subject to technical change. Voltex codes and descriptions have been used above. Use Voltex K8 codes and
product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue. VOLTEX CATALOGUE 103
MOTOR CONTROL AND ACCESSORIES
CONTACTORS
Screw Type Magnetic Contactors 3-Pole
Rated Current
Dimensions
380~440VAC
Coil Voltage
Type Frame Product Code
WxHxD KW AMP AMP 50/60Hz
(mm) AC3 AC1 AC3
AC24V D3351
AC48V D3352
AC110V D3353
MC-9B (AC) 45x73.5x86 4KW 25A 9A
AC240V D3354
Magnetic Contactor
AC415V D3355
22AF 3-Pole 9A AC3
Auxiliary: 1NO+1NC
Ue: 690V
AC550V D3356
Ui: 690V
Uimp: 6KV
DC12V D3357
DC24V D3358
MC-9B (DC) 45x73.5x117.7 4KW 25A 9A
DC48V D3359
DC110V D3360
AC24V D3361
AC48V D3362
AC110V D3363
MC-12B (AC) 45x73.5x86 5.5KW 25A 12A
AC240V D3364
DC24V D3368
MC-12B (DC) 45x73.5x117.7 5.5KW 25A 12A
DC48V D3369
DC110V D3370
AC24V D3371
AC48V D3372
AC110V D3373
MC-18B (AC) 45x73.5x86 7.5KW 32A 18A
AC240V D3374
Magnetic Contactor
22AF 3-Pole 18A AC3 AC415V D3375
Auxiliary: 1NO+1NC
Ue: 690V
Ui: 690V AC550V D3376
Uimp: 6KV
DC12V D3377
DC24V D3378
MC-18B (DC) 45x73.5x117.7 7.5KW 32A 18A
DC48V D3379
DC110V D3380
For extended & complete range visit www.voltex.co.za. Minimum quantity orders may apply. Dimensions generally shown in mm and subject to technical change. Voltex codes and descriptions have been used above. Use Voltex K8 codes and
104 VOLTEX CATALOGUE product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue.
MOTOR CONTROL AND ACCESSORIES
CONTACTORS
Screw Type Magnetic Contactors 3-Pole
Rated Current
Dimensions
380~440VAC
Coil Voltage Product
Type Frame
WxHxD KW AMP AMP 50/60Hz Code
(mm) AC3 AC1 AC3
AC24V D3381
AC48V D3382
AC110V D3383
MC-22B (AC) 45x73.5x86 11KW 40A 22A
AC240V D3384
Magnetic Contactor
22AF 3-Pole 22A AC3 AC415V D3385
Auxiliary: 1NO+1NC
Ue: 690V
Ui: 690V AC550V D3386
Uimp: 6KV
DC12V D3387
DC24V D3388
MC-22B (DC) 45x73.5x117.7 11KW 40A 22A
DC48V D3389
DC110V D3390
AC24V D3391
AC48V D3392
AC110V D3393
MC-32A (AC) 69x83x93 15KW 50A 32A
AC240V D3394
Magnetic Contactor
40AF 3-Pole 32A AC3 AC415V D3395
Auxiliary: 2NO+2NC
Ue: 690V
Ui: 1000V AC550V D3396
Uimp: 8KV
DC12V D3397
DC24V D3398
MC-32A (DC) 69x83x120 15KW 50A 32A
DC48V D3399
DC110V D3400
AC24V D3401
AC48V D3402
AC110V D3403
Magnetic Contactor
AC415V D3405
40AF 3-Pole 40A AC3
Auxiliary: 1NO+1NC
Ue: 690V AC550V D3406
Ui: 1000V
Uimp: 8KV
DC12V D3407
DC24V D3408
DC110V D3410
For extended & complete range visit www.voltex.co.za. Minimum quantity orders may apply. Dimensions generally shown in mm and subject to technical change. Voltex codes and descriptions have been used above. Use Voltex K8 codes and
product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue. VOLTEX CATALOGUE 105
MOTOR CONTROL AND ACCESSORIES
CONTACTORS
Screw Type Magnetic Contactors 3-Pole
Rated Current
Dimensions
380~440VAC
Coil Voltage Product
Type Frame
WxHxD KW AMP AMP 50/60Hz Code
(mm) AC3 AC1 AC3
AC24V D3411
AC48V D3412
AC110V D3413
MC-50A (AC) 79x106x129 22KW 70A 50A
Magnetic Contactor AC240V D3414
65AF 3-Pole AC3
Auxiliary: 1NO+1NC AC415V D3415
Ue: 690V AC550V D3416
Ui: 1000V
Uimp: 8KV DC12V D3417
DC24V D3418
MC-50A (DC) 79x106x149 22KW 70A 50A
DC48V D3419
DC110V D3420
AC24V D3421
AC48V D3422
AC110V D3423
MC-65A (AC) 79x106x129 30KW 100A 65A
Magnetic Contactor AC240V D3424
65AF 3-Pole AC3
Auxiliary: 2NO+2NC AC415V D3425
Ue: 690V AC550V D3426
Ui: 1000V
Uimp: 8KV DC12V D3427
DC24V D3428
MC-65A (DC) 79x106x149 30KW 100A 65A
DC48V D3429
DC110V D3430
AC24V D3431
AC48V D3432
AC110V D3433
MC-75A (AC) 94x140x137 37KW 110A 75A
AC240V D3434
Magnetic Contactor
100AF 3-Pole AC3
AC415V D3435
Auxiliary: 2NO+2NC
Ue: 690V
AC550V D3436
Ui: 1000V
Uimp: 8KV
DC12V D3437
DC24V D3438
MC-75A (DC) 94x140x174 37KW 110A 75A
DC48V D3439
DC110V D3440
AC24V D3441
AC48V D3442
AC110V D3443
MC-85A (AC) 94x140x137 45KW 135A 85A
AC240V D3444
Magnetic Contactor
100AF 3-Pole AC3
AC415V D3445
Auxiliary: 2NO+2NC
Ue: 690V
AC550V D3446
Ui: 1000V
Uimp: 8KV
DC12V D3447
DC24V D3448
MC-85A (DC) 94x140x174 45KW 135A 85A
DC48V D3449
DC110V D3450
For extended & complete range visit www.voltex.co.za. Minimum quantity orders may apply. Dimensions generally shown in mm and subject to technical change. Voltex codes and descriptions have been used above. Use Voltex K8 codes and
106 VOLTEX CATALOGUE product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue.
MOTOR CONTROL AND ACCESSORIES
CONTACTORS
Lug Type Magnetic Contactors 3-Pole
Rated Current
Dimensions
380~440VAC
Coil Voltage Product
Type Frame WxHxD KW AMP AMP 50/60Hz Code
(mm) AC3 AC1 AC3
AC24V D3451
AC48V D3452
MC-100A AC110V D3453
Magnetic Contactor 94x140x137 55KW 160A 105A
(AC) AC240V D3454
100AF 3-Pole AC3
Auxiliary: 2NO+2NC AC415V D3455
Ue: 690V AC550V D3456
Ui: 1000V
Uimp: 8KV DC12V D3457
MC-100A DC24V D3458
94x140x174 55KW 150A 105A
(DC) DC48V D3459
DC110V D3460
AC24V D3461
AC48V D3462
AC500V D3488
AC/DC100-220C D3489
MC-265A 147KW 320A 265A AC400V D3490
AC500V D3491
AC/DC100-220C D3492
Magnetic Contactor AC400V D3493
MC-330A 160KW 350A 330A
400AF 3-Pole AC3
Auxiliary: 2NO+2NC AC500V D3494
163x243x196
Ue: 690V
Ui: 1000V AC/DC100-220C D3495
Uimp: 8KV
AC400V D3496
MC-400A 200KW 420A 400A
AC500V D3497
AC/DC100V D3498
Magnetic Contactor
500AF 3-Pole AC3 AC/DC200V D3499
Auxiliary: 2NO+2NC
MC-500A 285x312x242 265KW 550A 500A
Ue: 690V
Ui: 1000V
Uimp: 8KV AC400V D3500
AC500V D3501
For extended & complete range visit www.voltex.co.za. Minimum quantity orders may apply. Dimensions generally shown in mm and subject to technical change. Voltex codes and descriptions have been used above. Use Voltex K8 codes and
product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue. VOLTEX CATALOGUE 107
MOTOR CONTROL AND ACCESSORIES
CONTACTORS
Lug Type Magnetic Contactors 3-Pole
Rated Current
Dimensions
380~440VAC
Coil Voltage
Type Frame Product Code
WxHxD KW AMP AMP 50/60Hz
(mm) AC3 AC1 AC3
AC/DC100V D3502
AC/DC200V D3503
AC400V D3504
Magnetic Contactor
630AF 3-Pole AC3
Auxiliary: 2NO+2NC MC-630A 285x312x242 330KW 660A 630A
Ue: 690V
Ui: 1000V
Uimp: 8KV
AC500V D3505
AC/DC100V D3506
AC/DC200V D3507
AC400V D3508
Magnetic Contactor
800AF 3-Pole AC3
Auxiliary: 2NO+2NC
MC-800A 285x312x242 440KW 900A 800A
Ue: 690V
Ui: 1000V
Uimp: 8KV
AC500V D3509
Rated Current
Dimensions
380~440VAC
Coil Voltage Product
Type Frame
WxHxD KW AMP AMP 50/60Hz Code
(mm) AC3 AC1 AC3
AC24V D4234
AC48V D4235
AC550V D4238
AC24V D4112
AC48V D4113
Magnetic Contactor
12AF 4-Pole AC3 AC110V D4114
Ue: 690V MC-12A/4 (AC) 47.2x80.5x86.8 5.5KW 25A 12A
Ui: 690V AC240V D4111
Uimp: 6KV
AC415V D4115
AC550V D4116
AC24V D4136
AC48V D4137
Magnetic Contactor
18AF 4-Pole AC3 AC110V D4138
Ue: 690V MC-18A/4 (AC) 47.2x80.5x86.8 7.5KW 32A 18A
Ui: 690V AC240V D4141
Uimp: 6KV
AC415V D4139
AC550V D4140
For extended & complete range visit www.voltex.co.za. Minimum quantity orders may apply. Dimensions generally shown in mm and subject to technical change. Voltex codes and descriptions have been used above. Use Voltex K8 codes and
108 VOLTEX CATALOGUE product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue.
MOTOR CONTROL AND ACCESSORIES
CONTACTORS
Screw Type Magnetic Contactors 4-Pole
Rated Current
Dimensions
380~440VAC
Coil Voltage
Type Frame Product Code
WxHxD KW AMP AMP 50/60Hz
(mm) AC3 AC1 AC3
AC24V D4156
AC48V D4157
Magnetic Contactor
22AF 4-Pole AC3 AC110V D4155
Ue: 690V MC-22A/4(AC) 47.2X80.5X86.8 11KW 40A 22A AC240V D4154
Ui: 690V
Uimp: 6KV AC415V D4159
AC550V D4160
AC24V D4176
AC48V D6225
Magnetic Contactor
32AF 4-Pole AC3 AC110V D7531
Ue: 690V MC-32A/4 (AC) 55X83.5X94.5 15KW 50A 32A AC240V D4174
Ui: 690V
Uimp: 6KV AC415V D4730
AC550V D4731
AC24V D6224
Magnetic Contactor AC48V D4732
40AF 4-Pole AC3
AC110V D6226
Ue: 690V
MC-40A/4 (AC) 55X83.5X94.5 18,5KW 60A 40A AC240V D3655
Ui: 690V
Uimp: 6KV AC415V D4733
AC550V D4734
AC24V D5002
AC48V D4735
Magnetic Contactor
50AF 4-Pole AC3 AC110V D6223
Ue: 690V MC-50A/4 (AC) 91X123.5X118 22KW 70A 50A
Ui: 690V AC240V D3656
Uimp: 6KV
AC415V D4729
AC550V D4736
AC24V D4757
AC48V D4737
Magnetic Contactor
65AF 4-Pole AC3 AC110V D4758
Ue: 690V MC-65A/4 (AC) 91X123.5X118 30KW 100A 65A
Ui: 690V AC240V D4759
Uimp: 6KV
AC415V D4738
AC550V D4739
AC24V D4677
AC48V D4740
Magnetic Contactor
AC110V D4678
75AF 4-Pole AC3
Ue: 690V MC-75A/4 (AC) 91X123.5X118 37KW 110A 75A
Ui: 690V
AC240V D4679
Uimp: 6KV
AC415V D4741
AC550V D4742
AC24V D4680
AC48V D4743
Magnetic Contactor
85AF 4-Pole AC3 AC110V D4681
Ue: 690V MC-85A/4 (AC) 91X123.5X118 45KW 135A 85A
Ui: 690V AC240V D4682
Uimp: 6KV
AC415V D4744
AC550V D4745
For extended & complete range visit www.voltex.co.za. Minimum quantity orders may apply. Dimensions generally shown in mm and subject to technical change. Voltex codes and descriptions have been used above. Use Voltex K8 codes and
product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue. VOLTEX CATALOGUE 109
MOTOR CONTROL AND ACCESSORIES
CONTACTORS
Screw Type Magnetic Contractors 4-Pole
Rated Current
Dimensions
380~440VAC
Coil Voltage
Type Frame Product Code
WxHxD KW AMP AMP 50/60Hz
(mm) AC3 AC1 AC3
AC24V D3451
AC48V D4746
Magnetic Contactor
100AF 4-Pole AC3 AC110V D4107
Ue: 690V MC-100A/4 (AC) 170X203X185 55KW 160A 105A
Ui: 690V AC240V D4108
Uimp: 6KV
AC415V D4748
AC550V D4749
AC24V D4124
AC48V D4125
AC400V D4128
AC500V D4129
AC24V D4130
AC48V D4131
Magnetic Contactor
150AF 4-Pole AC3 AC110V D4134
Ue: 690V MC-150A/4 (AC) 170X203X185 75KW 200A 150A
Ui: 690V AC240V D4135
Uimp: 6KV
AC415V D4132
AC550V D4133
AC/DC24V D4148
AC/DC48V D4149
Magnetic Contactor
185AF 4-Pole AC3
Ue: 690V MC-185A/4 170X203X185 90KW 250A 185A AC/DC100-220C D4150
Ui: 690V
Uimp: 6KV
AC400V D4152
AC500V D4153
Note:
• Items above with (-) in the codes column are available on special request
For extended & complete range visit www.voltex.co.za. Minimum quantity orders may apply. Dimensions generally shown in mm and subject to technical change. Voltex codes and descriptions have been used above. Use Voltex K8 codes and
110 VOLTEX CATALOGUE product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue.
MOTOR CONTROL AND ACCESSORIES
CONTACTOR ACCESSORIES
Contactor Accessories
Applied
Type Model Description Product Code
To Product
2NO D4963
UA-2 1NO+1NC D4756
2NC D3645
Auxiliary 4NO D3646
Contacts MC-9B ~ MC-150A FRONT MOUNT
3NO+1NC D3647
Ue: 600V
Ui: 600V UA-4 2NO+2NC D202
Uimp: 6KV 1NO+3NC D3648
Rated Current: 16A (UA-1: 10A)
4NC D3649
UA-1 1NO+1NC D200
MC-185A ~ MC-800A SIDE MOUNT
AU-100E 1NO+1NC D4687
For extended & complete range visit www.voltex.co.za. Minimum quantity orders may apply. Dimensions generally shown in mm and subject to technical change. Voltex codes and descriptions have been used above. Use Voltex K8 codes and
product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue. VOLTEX CATALOGUE 111
MOTOR CONTROL AND ACCESSORIES
CONTACTOR ACCESSORIES
Coils for 3-Pole Contactors
Applied
Type Model Voltage Product Code
To product
AC24V D4930
AC48V D4931
AC110V D4932
AC240V D4933
AC415V D4934
MC-32A
Replacement Coils AC550V 50/60Hz D4935
MC40A
MC-32A ~ MC-40A
DC12V -
DC24V -
DC48V -
DC110V -
DC250V -
AC24V D3748
AC48V D3749
AC110V D3750
AC240V D3751
AC415V D3752
MC-50A
Replacement Coils AC550V 50/60Hz D3753
MC65A
MC-50A ~ MC-65A
DC12V -
DC24V -
DC48V -
DC110V -
DC250V -
AC24V D4936
AC48V D4937
AC110V D4938
AC240V D4939
AC415V D4940
MC-75A
Replacement Coils AC550V 50/60Hz D4941
MC100A
MC-75A ~ MC-100A
DC12V -
DC24V -
DC48V -
DC110V -
DC250V -
Note:
• Items above with (-) in the codes column are available on special request
For extended & complete range visit www.voltex.co.za. Minimum quantity orders may apply. Dimensions generally shown in mm and subject to technical change. Voltex codes and descriptions have been used above. Use Voltex K8 codes and
112 VOLTEX CATALOGUE product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue.
MOTOR CONTROL AND ACCESSORIES
CONTACTOR ACCESSORIES
Coils for 3-Pole Contractors
Apply To
Type Model Voltage Product Code
Product
AC24V D4943
AC48V D4944
AC110V D4945
MC-130A
Replacement Coils
MC-150A
MC-130A ~ MC-150A
AC220V D4946
AC400V D4947
50/60Hz
AC500V D4948
DC24V -
DC48V -
Replacement Coils MC-130A
MC-130A ~ MC-150A MC-150A
DC110V -
DC220V -
AC/DC24V D4949
AC/DC48V D4950
AC400V D4952
AC500V D4953
AC/DC100~240V D4954
AC500V -
AC/DC110V D4956
AC/DC240V D4957
AC400V D4958
AC500V D5080
Note:
• Items above with (-) in the codes column are available on special request
For extended & complete range visit www.voltex.co.za. Minimum quantity orders may apply. Dimensions generally shown in mm and subject to technical change. Voltex codes and descriptions have been used above. Use Voltex K8 codes and
product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue. VOLTEX CATALOGUE 113
MOTOR CONTROL AND ACCESSORIES
5A 4 - 6A D3518 -
MC-9B TO
MT-32 (3K) 45x75x90
MC-40A
6.5A 5 - 8A D3519 -
7.5A 6 - 9A D3520 -
5A 4 - 6A - D4690
6.5A 5 - 8A - D4691
7.5A 6 - 9A - D4692
MC-9B TO
MT-32 (3D) 45x75x90 8.5A 7 - 10A - D4693
MC-40A
11A 9 - 13A - D4694
MT-63 (3K)
Thermal 54A 45 - 65A D4701 -
Overload
MC-50A TO
Ue: 690V 55x81x100
MC-65A
Ui: 680V
Uimp: 6KV 42A 34 - 50A - D4702
MT-63 (3D)
54A 45 - 65A - D4703
Note:
• Items above with (-) in the codes column are available on special request
For extended & complete range visit www.voltex.co.za. Minimum quantity orders may apply. Dimensions generally shown in mm and subject to technical change. Voltex codes and descriptions have been used above. Use Voltex K8 codes and
114 VOLTEX CATALOGUE product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue.
MOTOR CONTROL AND ACCESSORIES
MT-400 (3D)
CLASS 20
350A 260 - 400A D4725
MT-800 (3K)
CLASS 10
MT-800 (3D)
CLASS 20
Note:
• Items above with (-) in the codes column are available on special request
For extended & complete range visit www.voltex.co.za. Minimum quantity orders may apply. Dimensions generally shown in mm and subject to technical change. Voltex codes and descriptions have been used above. Use Voltex K8 codes and
product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue. VOLTEX CATALOGUE 115
MOTOR CONTROL AND ACCESSORIES
Applied
Type Model Description Product Code
To Product
GMP60-T
0-30KW 60A 0.5-60A -
110V
72x63x69
GMP60-T
60A 0.5-60A -
220V
D4056 (110V)
DMP-60S 0.22 - 30KW 60A 5 - 60A
Digital Motor D4058 (220V)
Protection Relay 78x109x97
(SZ = With Ground Fault)
DMP-06SZ 0.22 - 3KW 6A 0.5 - 6A D4059
D4061 (110V)
DMP-60SZ 0.22 - 30KW 60A 5 - 60A
D4060 (220V)
1.5MTR -
1MTR -
DMP Extension
EXTENSION CABLE FOR DIGITAL MOTOR PROTECTION RELAY (DMP)
Cable
2MTR D7853
4MTR -
Note:
• Items above with (-) in the codes column are available on special request
For extended & complete range visit www.voltex.co.za. Minimum quantity orders may apply. Dimensions generally shown in mm and subject to technical change. Voltex codes and descriptions have been used above. Use Voltex K8 codes and
116 VOLTEX CATALOGUE product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue.
MOTOR CONTROL AND ACCESSORIES
Manual Motor
Starter 3-Pole (63AF)
100% Ics; Icu
100kA @ 400/415V MMS-63S 55x140x130.3 22KW 50A 34 ~ 50A D7666
• Overload Protection
• Phase Fail Protection
• Short Circuit Protection
Extended
Rotary MEH-63 MMS-63 Lockable Handle With 315mm Shaft D4562
Handle
1NO+1NC D206
1NO+1NC D4272
2NC D4273
1NO+1NC D4269
Any Trip Alarm
Switch LA SIDE MOUNTED ON LEFT 2NO D4268
2-Pole
2NC D4270
AC24V D4068
MMS-32 ~ 100
AC110-127V D4069
Shunt Trip AC220-230V D173
(Cannot be used in RS SIDE MOUNTED ON RIGHT
combination with RU or RUX) AC240V D4070
AC380-400V D4071
AC415-440V D4072
AC24V D14576
AC110-127V D14577
Under Voltage Trip
(Cannot be used in RU SIDE MOUNTED ON RIGHT AC240V D2976
combination with RSor RUX)
AC380-400V D2697
AC415-440V D4275
For extended & complete range visit www.voltex.co.za. Minimum quantity orders may apply. Dimensions generally shown in mm and subject to technical change. Voltex codes and descriptions have been used above. Use Voltex K8 codes and
product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue. VOLTEX CATALOGUE 117
MOTOR CONTROL AND ACCESSORIES
AC415-440V D4280
IP65
EPH-32 MMS-32H ENCLOSURE SURFACE MOUNT IP65 D2690
Enclosure
For extended & complete range visit www.voltex.co.za. Minimum quantity orders may apply. Dimensions generally shown in mm and subject to technical change. Voltex codes and descriptions have been used above. Use Voltex K8 codes and
118 VOLTEX CATALOGUE product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue.
MOTOR CONTROL AND ACCESSORIES
Extra’s
• Phase Failure
• Ammeter and CT
• 24Hr Timer
• Selector Switch
• Pressure Switch
• Indicator Lamp
• Selector Switches
Note:
• Star Delta Starters and direct online units can be built to customers’ specifications.
For extended & complete range visit www.voltex.co.za. Minimum quantity orders may apply. Dimensions generally shown in mm and subject to technical change. Voltex codes and descriptions have been used above. Use Voltex K8 codes and
product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue. VOLTEX CATALOGUE 119
MOTOR CONTROL AND ACCESSORIES
MISCELLANEOUS
Pushbutton and Pilot Light Series
24V D14585
110V D14587
WHITE
240V D999
380V D1459
24V D4504
110V D14588
RED
240V D998
380V D1461
24V D4504
22mm LED Pilot Light 110V D14589
22mm LED Pilot Light GREEN
Complete Unit 240V D997
380V D1460
24V D4506
110V D14590
YELLOW
240V D1000
380V D1462
24V D14586
110V D1239
BLUE
240V D996
380V D1462
1 Hole Yellow
65X65mm L901
Empty Enclosure
1 Hole Grey
65X65mm L900
Empty Enclosure
Empty Enclosures
2 Hole Grey
100x65mm L902
Empty Enclosure
3 Hole Grey
135x65mm L903
Empty Enclosure
For extended & complete range visit www.voltex.co.za. Minimum quantity orders may apply. Dimensions generally shown in mm and subject to technical change. Voltex codes and descriptions have been used above. Use Voltex K8 codes and
120 VOLTEX CATALOGUE product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue.
MOTOR CONTROL AND ACCESSORIES
CONTACTORS
TeSys D-Range Contactors
LC1 D09** LC1 D25** LC1 D65A** LC1 D95A** LC1 D115A** LC1D150**
3-Pole Contactors
Power connections by EverLink® BTR screw connectors(4) and control by spring terminals
LC1 D40A** 11 18.5 22 22 40 1NO+1NC
Notes:
**Please refer to the table below for coil sizes.
- Standard control circuit voltages (for other voltages, please consult your local branch).
AC Supply
LC1 D09…D150 (D115 And D150 Coils With Built-In Suppression as Standard, by Bi-Directional Peak Limiting Diode).
50/60 Hz B7 E7 F7 P7 V7 S7
LC1 D80…D115
50 Hz B5 E5 F5 P5 V5 S5
60 Hz B6 E6 F6 - - -
For extended & complete range visit www.voltex.co.za. Minimum quantity orders may apply. Dimensions generally shown in mm and subject to technical change. Voltex codes and descriptions have been used above. Use Voltex K8 codes and
product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue. VOLTEX CATALOGUE 121
MOTOR CONTROL AND ACCESSORIES
CONTACTORS
Replacement Coils for D-Range
V Ω H
50/60 Hz
50/60 Hz
Note:
- The last 2 digits in the reference represent the voltage code.
- This coil can only be used on 50 Hz.
For extended & complete range visit www.voltex.co.za. Minimum quantity orders may apply. Dimensions generally shown in mm and subject to technical change. Voltex codes and descriptions have been used above. Use Voltex K8 codes and
122 VOLTEX CATALOGUE product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue.
MOTOR CONTROL AND ACCESSORIES
CONTACTORS
Replacement Coils for D-Range
Specifications
Average consumption at 20 °C:
- inrush (cos = 0.75) 50 Hz: 200 VA, 60 Hz: 220 VA LXD 6••
- sealed (cos = 0.3) 50 Hz: 20 VA, 60 Hz: 22 VA
Operating range (ø≤ 55 °C): 0.85…1.1 Uc.
V Ω H
50/60 Hz
Note:
- The last 2 digits in the reference represent the voltage code.
* This coil can be used on 220/240 V at 50 Hz and on 240 V only at 60 Hz.
Specifications
Average consumption at 20 °C:
- inrush cos = 0.9 - 280 to 350 VA,
LX1 D8••
- sealed cos = 0.9 - 2 to 18 VA.
Operating range (ø≤ 55 °C): 0.8…1.15 Uc.
Coils with integral suppression device fitted as standard, class B.
V Ω H
50/60 Hz
Note:
The last 2 digits in the reference represent the voltage code.
For extended & complete range visit www.voltex.co.za. Minimum quantity orders may apply. Dimensions generally shown in mm and subject to technical change. Voltex codes and descriptions have been used above. Use Voltex K8 codes and
product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue. VOLTEX CATALOGUE 123
MOTOR CONTROL AND ACCESSORIES
CONTACTORS
TeSys D-Range Contactor Accessories
Instantaneous auxiliary contact blocks
Time Delay
Model Clip-On Mounting Number Of Contacts Product Code
Type Setting Range
For extended & complete range visit www.voltex.co.za. Minimum quantity orders may apply. Dimensions generally shown in mm and subject to technical change. Voltex codes and descriptions have been used above. Use Voltex K8 codes and
124 VOLTEX CATALOGUE product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue.
MOTOR CONTROL AND ACCESSORIES
CONTACTORS
TeSys D-Range Contactor Accessories
Component parts for assembling reversign contactors for motor control, low-speed/high-speed starters and star-delta starters
For 3-Pole reversing contactors for motor control
Contactors with screw clamp terminals or connectors. Horizontally mounted, assembled by customer.
Kit Comprising:
LAD 9R1V • a mechanical interlock LAD 9V2 with electrical interlocking LAD 9V1. LC1 D09 to D38 D1911
• a set of power connections LAD 9V5 (parallel) and LAD 9V6 (reversing)
Kit Comprising:
LAD 9R1 • a mechanical interlock LAD 9V2 without electrical interlocking LC1 D09 to D38 D14659
• a set of power connections LAD 9V5 (parallel) and LAD 9V6 (reversing)
Kit Comprising:
LAD 9R3 • mechanical interlock LAD 4CMa, LC1 D40A to D65A D14660
• 9a set of power connections LA9 D65A6
For extended & complete range visit www.voltex.co.za. Minimum quantity orders may apply. Dimensions generally shown in mm and subject to technical change. Voltex codes and descriptions have been used above. Use Voltex K8 codes and
product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue. VOLTEX CATALOGUE 125
MOTOR CONTROL AND ACCESSORIES
CONTACTORS
TeSys F-Range Contactors
TeSys F contactors for motor control in utilisation category AC-3 (115 to 800 A)
Control circuit: AC or DC
3-Pole Contactors
Rated
220V 380V Operational Current
230V 400V 415V 440V
Type In AC-3 440 V Auxiliary Product Code
Up To Configuration
kW kW kW kW A
LC1 F115** 30 55 59 59 115 1NO+1NC D1959
Note:
** Refer to table below for coil voltage.
LC1 F115…F225 B5 E5 F5 P5 N5
50 Hz (coil LX1)
60 Hz (coil LX1) E6 F6
LC1 F265…F330 B7 E7 F7 P7 N7
40…400 Hz (coil LX1)
LC1 F400…F630 E7 F7 P7 N7
40…400 Hz (coil LX1)
LC1 F780 F7 P7 N7
40…400 Hz (coil LX1)
LC1 F800 FW MW QW
40…400 Hz (coil LX4) (4)
For extended & complete range visit www.voltex.co.za. Minimum quantity orders may apply. Dimensions generally shown in mm and subject to technical change. Voltex codes and descriptions have been used above. Use Voltex K8 codes and
126 VOLTEX CATALOGUE product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue.
MOTOR CONTROL AND ACCESSORIES
CONTACTORS
Replacement Coils for F-Range
References
- Maximum ambient air temperature: 55 °C.
- Operating cycles/hour (ø ≤ 55 °C): ≤ 2400.
LX1 FF•••
Control Circuit
Voltage Average Resistance at Inductance of Closed
20 °C ± 10 % Circuit Product
Model Voltage Code
Code
Uc - 50 Hz
V Ω H
For contactors LC1, F115 and LC1, F150
LX1 FG•••
Control Circuit
Voltage Average Resistance at Inductance Of Closed
Model 20 °C ± 10 % Circuit Voltage Code Product Code
Uc - 50 Hz
V Ω H
For Contactors LC1, F185 and LC1, F225
Note:
• Items above with (-) in the codes column are available on special request
For extended & complete range visit www.voltex.co.za. Minimum quantity orders may apply. Dimensions generally shown in mm and subject to technical change. Voltex codes and descriptions have been used above. Use Voltex K8 codes and
product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue. VOLTEX CATALOGUE 127
MOTOR CONTROL AND ACCESSORIES
CONTACTORS
Replacement Coils for F-Range
Specification
Average consumption at 20 °C for 50 or 60 Hz and cos ø =0.9:
- inrush: 600…700 VA,
- sealed: 8…10 VA.
Operating time at Uc: closing = 40…65 ms, opening = 100…170 ms.
References
- Low sealed consumption.
- Operate on networks with harmonic numbers ≤ 7.
- Operating cycles/hour (ø≤ 55 °C): ≤2400. LX1 FH•••2
Specification
Average consumption at 20 °C for 50 or 60 Hz and cos ø =0.9:
- Inrush: 1000…1150 VA,
- Sealed: 12…18 VA.
Operating time at Uc: closing = 40…65 ms, opening = 100…170.
LX1 FJ•••
Specification
Average consumption at 20 °C for 50 or 60 Hz and cos ø =0.9:
- inrush: 1050…1150 VA,
- sealed: 16…20 VA.
Operating cycles/hours (ø ≤ 55°C): ≤2400.
Heat dissipation:18 W.
Operating time at Uc: closing = 40…75 ms, opening = 100…170 ms.
References
Low sealed consumption.
Operate on networks with harmonic numbers ≤ 7. LX1 FK•••
For extended & complete range visit www.voltex.co.za. Minimum quantity orders may apply. Dimensions generally shown in mm and subject to technical change. Voltex codes and descriptions have been used above. Use Voltex K8 codes and
128 VOLTEX CATALOGUE product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue.
MOTOR CONTROL AND ACCESSORIES
CONTACTORS
Specification
Average consumption at 20 °C for 50 or 60 Hz and cos ø =0.9:
- inrush: 1500…1730 VA,
- sealed: 20…25 VA.
Operating cycles/hours (ø ≤ 55°C): ≤1200.
Heat dissipation: 20 W.
Operating time at Uc: closing = 40…80 ms, opening = 100…200 ms.
LX1 FL•••
Note:
(1) Incompatible with LC1F1250.
- Higher amperage available
Maximum Number Of
Number Of Blocks Per Contactor Product
Model Description
Contacts Code
Clip-On Mounting
Mximum Number Of
Time Delay
Number Of Blocks Per Contactor Product
Reference
Contacts Code
Clip-On Mounting Type Range
LAD T2 0.1...30 D1909
On-delay
LAD T4 1 N/O 10...180 D3075
+ 2
LAD R2 1N/C 0.1...30 D1906
Off-delay
LAD R4 10...180 D1907
For extended & complete range visit www.voltex.co.za. Minimum quantity orders may apply. Dimensions generally shown in mm and subject to technical change. Voltex codes and descriptions have been used above. Use Voltex K8 codes and
product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue. VOLTEX CATALOGUE 129
MOTOR CONTROL AND ACCESSORIES
OVERLOADS
TeSys Thermal Motor Protection Overload Relays for D-Range Contactors
TeSys D, 3-pole thermal overload relays
Differential thermal overload relays
for use with fuses or magnetic circuit-breakers GV2 L and GV3 L
• Compensated relays with manual or automatic reset,\
• with relay trip indicator,
• for AC or DC
Class 10 A (1) For Connection Byever Link® Btr Screw Connectors (3)
For extended & complete range visit www.voltex.co.za. Minimum quantity orders may apply. Dimensions generally shown in mm and subject to technical change. Voltex codes and descriptions have been used above. Use Voltex K8 codes and
130 VOLTEX CATALOGUE product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue.
MOTOR CONTROL AND ACCESSORIES
Note:
* Independant mounting only; use LA7D3064
3-Pole electronic thermal overload relays, TeSys LR9 F for motor protection
For extended & complete range visit www.voltex.co.za. Minimum quantity orders may apply. Dimensions generally shown in mm and subject to technical change. Voltex codes and descriptions have been used above. Use Voltex K8 codes and
product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue. VOLTEX CATALOGUE 131
MOTOR CONTROL AND ACCESSORIES
Standard power ratings of 3-phase motors 50/60 Hz in category AC-3 Setting Magnetic
Range of Tripping Product
400/415 V 500 V thermal trips Current Code
Model
P Icu Ics(1) P Icu Ics(1)
A A(d±20%)
kW kA kW kA
9…14 170
Note:
* >100kA
(1) as % of Icu
(2) Combined with a recommended contactor
For extended & complete range visit www.voltex.co.za. Minimum quantity orders may apply. Dimensions generally shown in mm and subject to technical change. Voltex codes and descriptions have been used above. Use Voltex K8 codes and
132 VOLTEX CATALOGUE product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue.
MOTOR CONTROL AND ACCESSORIES
Magnetic Tripping
Standard power ratings of 3-Phase motors 50/60Hz in category AC-3 Use in association with thermal Product
protection Current
Code
Model
400/415V 500V 690V
Rating d±20% overload relay
P Icu Ics(1) P Icu Ics(1) P Icu Ics(1)
kW kA kW kA kW kA A A Model Product Code
GV2LE03 0.06 * * 0.4 5 LR2K0302 D14792 D14756
LR2K0307 or D2019
GV2LE07 0.75 * * 1.6 22.5 D14760
LRD06 D1975
GV2L07 0.75 * * 1.1 * * 1.5 2.5 33.5 LR2K0308 D2020 D14760
GV2LE08 D14761
0.75 * * 1.1 * * 1.5 2.5 33.5 LRD07 D1976
GV2L08 D14773
LR2K0308 or D2020
GV2LE08 1.1 * * 2.5 33.5 D14761
LRD08 D1977
GV2L08 1.5 1.5 * * 3 3 75 4 51 LR2K0310 D14795 D14773
GV2LE08 1.5 * * 1.5 * * 3 4 100 4 51 LRD08 D1977 D14761
LR2K0312 or D14796
GV2L08 2.2 4 51 D14773
LRD08 D1977
GV2LE10 2.2 * * 3 50 100 4 3 75 6.3 78 LR2K0312 D14796 D14762
GV2L10 2.2 * * 3 * * 4 4 100 6.3 78 LRD10 D1978 D14774
GV2LE14 3 * * 4 10 100 5.5 3 75 10 138 LR2K0314 D14797 D14763
GV2L14 3 * * 4 10 100 5.5 4 100 10 138 LRD12 D1979 D14775
Note:
* >100kA (1) as % of Icu Common accessories GV2 / GV3
For extended & complete range visit www.voltex.co.za. Minimum quantity orders may apply. Dimensions generally shown in mm and subject to technical change. Voltex codes and descriptions have been used above. Use Voltex K8 codes and
product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue. VOLTEX CATALOGUE 133
MOTOR CONTROL AND ACCESSORIES
GV3 APN02
Sold in Weight
Model Description Application Product Code
lots of kg
For mounting a GV2 ME or GV2 LE by screw
GV2 AF02 10 0.021 D14695
fixing
Adapter plates
For mounting a GV2 ME or GV2 P and contactor
LAD 311 1 0.040 D14696
LC1 D09...D38 with front faces aligned
GV2 AF3 Combination blocks Between GV2 and a contactor LC1 D09...D38 D3340
Pitch Weight
Model Description Application Product Code
mm kg
GV2 G245 45 0.038 D14701
GV2 G254 2 tap-offs 54 0.038 D14592
GV2 G272 72 0.042 D14702
GV2 G345 45 0.058 D14703
Sets of 3-pole 3 tap-offs
GV2 G354 54 0.060 D14704
63A busbars
GV2 G445 45 0.077 D10705
GV2 G454 4 tap-offs 54 0.085 D1881
GV2 G472 72 0.094 D14706
GV2 G554 5 tap-offs 54 0.100 D14698
GV1 G09 Terminal block Connection from the top 1 0.040 D14708
(for supply to one or more GV2 G
Can be filled with current limiter GV1 L3 (GV2
GV2 G05 busbar sets) 1 0.115 D1880
ME and GV2 P)
LA9 E07 Cover for terminal block For mounting in modular panels 10 0.005 D14709
Flexible 3-pole connection (for
Centre distance between mounting rails:
GV1 G02 connecting a GV2 to a contactor 10 0.013 D14710
100...120mm
LC1-D09...D25
Set of connections (upstream/ For connecting GV2 ME to a printed circuit
GV2 GA01 10 0.045 D14711
downstream). board
"Large Spacing" adapter UL 508
GV2 GH7 For GV2••HP (except 32A) 1 0.040 D14712
type E
Clip-in marker holders (supplied
LA9 D92 For GV2 P, GV2 L, GV2 LE and GV2 RT (8x22mm) 100 0.001 D14713
with each circuit-breaker)
For extended & complete range visit www.voltex.co.za. Minimum quantity orders may apply. Dimensions generally shown in mm and subject to technical change. Voltex codes and descriptions have been used above. Use Voltex K8 codes and
134 VOLTEX CATALOGUE product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue.
MOTOR CONTROL AND ACCESSORIES
Description
1 Kit hanle + mounting system
2 Universal handle
3 Shaft
4 Bracket
5 Shaft support plate for deep enclosure
6 Retrofit accessory
7 Laser square accessory
Bracket
GV APH02 For GV2 P/L 4 0.300 D14787
Retrofit accessory
GV APP1 For GV2 P/L 6 0.100 D14789
Contact Blocks
Model Description Type of contacts Weight Product Code
GV AE1 N/O or N/C (1) 0.015 D14723
GV AE11 (2) N/O or N/C 0.020 D1868
GV AE20 (2) Instantaneous auxiliary contacts N/O or N/O 0.020 D14724
GV2 AN11 N/O or N/C 0.050 D1869
GV2 AN20 N/O or N/O 0.050 D14725
For extended & complete range visit www.voltex.co.za. Minimum quantity orders may apply. Dimensions generally shown in mm and subject to technical change. Voltex codes and descriptions have been used above. Use Voltex K8 codes and
product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue. VOLTEX CATALOGUE 135
MOTOR CONTROL AND ACCESSORIES
Notes:
(1) Choice of N/C or N/O contact operation, depending on which way round the reversible block is mounted.
(2) Contact blocks available in version with spring terminal connections. Add a figure 3 at the end of the references selected above.
Example: GV AED101 becomes GV AED1013.
(3) The GV AD•• is always mounted next to the circuit-breakers.
(4) To order an undervoltage trip: replace the dot(•) in the reference with a U, example: GV AU025.
To order a shunt trip: replace the dot(•) in the reference with a S, example: GV AS025.
(5) Sold in lots of 5.
GVC2 MC
Possible no of side
mounting auxiliary contact
Model Type Degree of protection blocks on GV2 ME Product code
Left Hand Right
Side Hand Side
For extended & complete range visit www.voltex.co.za. Minimum quantity orders may apply. Dimensions generally shown in mm and subject to technical change. Voltex codes and descriptions have been used above. Use Voltex K8 codes and
136 VOLTEX CATALOGUE product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue.
MOTOR CONTROL AND ACCESSORIES
CONTACTORS
TeSys Contactors Accessories
TeSys Protection Components
Thermal-magnetic and magnetic motor circuit-breakers GV2 with screw clamp connections accessories.
Accessories
Pitch
Model Description Application Product Code
(mm)
GV2 APN02 Red handle, front plate with trip status, IP54 D14593
Padlocking Device
For all GV2 Device
GV2 V03 For use with up to 4 padlocks, ø 6mm shank max. D14594
(padlocks not included)
For extended & complete range visit www.voltex.co.za. Minimum quantity orders may apply. Dimensions generally shown in mm and subject to technical change. Voltex codes and descriptions have been used above. Use Voltex K8 codes and
product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue. VOLTEX CATALOGUE 137
MOTOR CONTROL AND ACCESSORIES
= +
Degree of protection IP66 / Nema 4X, 13 / Class 1
ø22.5 (22.4+0.4
0 recommended)
Mounting (mm)
30 (horizontal) x 40 (vertical)
Depth (mm) 43
Connection (!) Screw clamp terminals
Unmarked
Black NO XB4BC21 D14624
Red NC XB4BL42 D14625
With international marking
Double-headed pushbuttons Triple-headed pushbuttons
Degree of protection IP66 - IP69K IP66 - IP69K
Complete For user assembly Complete For user assembly
Note:
- All of the above products complete.
- Please enquire at your nearest branch for parts.
- For a full range of Push Buttons Switches and Pilot lights, please enquire at you nearest branch.
- Type oh head: Chromium plated circular bezel
- IP Rating: IP66
+
Trigger action (EN/ISO 13850)
Unmarked
Note:
(2) Emergency stop trigger action and mechanical latching pushbuttons conform to standards EN/IEC 60204-1 and EN/ISO 13850, to Machinery Directive
2006/42/EC and to standard EN/IEC 60947-5-5. Please consult your Regional Sales Office for a full explanation of these standards and directives.
For extended & complete range visit www.voltex.co.za. Minimum quantity orders may apply. Dimensions generally shown in mm and subject to technical change. Voltex codes and descriptions have been used above. Use Voltex K8 codes and
138 VOLTEX CATALOGUE product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue.
MOTOR CONTROL AND ACCESSORIES
Light functions
Pilot Lights
Circular bezel
Type of head
Smooth lens cap
Degree of protection
Mounting (mm)
IP66 / Nema 4X, 13 / Class 1
ø22.5 (22.4+0.4
0 recommended)
= +
30 (horizontal) x 40 (vertical)
Depth (mm) 43
Connection (!) Screw clamp terminals
Light source Integral LED
Pilot Lights
Supply voltage 230...240V AC
Colours Model Product Code
White XB4BVM1 D3093
Green XB4BVM3 D3094
Red XB4BVM4 D3095
Yellow XB4BVM5 D3096
Blue XB4BVM6 D3097
= +
Illuminated pushbuttons and selector switches
Supply voltage 230...240V AC
Colours Model Product Code
White XB4BW31M5 D14603
Green B4BW33M5 D14604
Red XB4BW34M5 D14605
Yellow XB4BW35M5 D14606
Blue XB4BW36M5 D14607
Double-headed Pushbuttons with LED Pilot Light (1 Flush Green Push, 1 Projecting Red Push)
Supply voltage 230...240V AC
Colours Model Product Code
White XB4BW73731M5 D14611
For extended & complete range visit www.voltex.co.za. Minimum quantity orders may apply. Dimensions generally shown in mm and subject to technical change. Voltex codes and descriptions have been used above. Use Voltex K8 codes and
product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue. VOLTEX CATALOGUE 139
MOTOR CONTROL AND ACCESSORIES
MISCELLANEOUS
Separate Components and Accessories
Single contact blocks Light blocks with integral LED Light block, direct supply
Consumption
Rated operational characteristic AC-15, 240 V - 3A
24 V AC/
18 mA
DC
14 mA 120 V AC
Positive operation of contacts NC contacts with positive
conforming to IEC/EN 60947-5-1 opening operation
14 mA 240 V AC
To combine with heads for integral LED For BA 9s bulb (not included)
Screw Spring
clamp clamp
24 V AC/ 110…120 230…240
terminal terminal 250 V max., 2.4 W max.
DC V AC V AC
80 x 80 mm XAPM1201 - - - XAPM1202 - -
For extended & complete range visit www.voltex.co.za. Minimum quantity orders may apply. Dimensions generally shown in mm and subject to technical change. Voltex codes and descriptions have been used above. Use Voltex K8 codes and
140 VOLTEX CATALOGUE product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue.
MOTOR CONTROL AND ACCESSORIES
MISCELLANEOUS
Accessories
Legend holders, 30 x 40mm, for 8 x 27mm legends
white or
Marking Background colour: black or red
yellow
0 (red
International ZBY2931 I ZBY2147 AUTO ZBY2115 STOP ZBY2304
background)
Emergency Arret
Marking Blank Not Halt Parada De Emergencia
Stop D’urgence
- Utilisation category: AC 15
- Rated operational current: 2A
- Rated operational voltge: 48 Vac
- Connections: screw type terminal
No. Steps
No. Steps
Lever Guide Description Model Product Code
For extended & complete range visit www.voltex.co.za. Minimum quantity orders may apply. Dimensions generally shown in mm and subject to technical change. Voltex codes and descriptions have been used above. Use Voltex K8 codes and
product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue. VOLTEX CATALOGUE 141