Professional Documents
Culture Documents
Product Data Sheet: 24K Carbon Tow
Product Data Sheet: 24K Carbon Tow
Product Data Sheet: 24K Carbon Tow
Storage:
Product Properties 2393 24K Carbon Tow should be stored indoors. The recommended
storage conditions are 40° F - 77°F (5-25°C) and less than 50 percent RH.
Tensile Strength (ksi) 710-750 KSI
Direct exposure to sunlight or rain should be avoided. If the roving is stored
Tensile Modulus(1) (Msi) 36-38 MSI at high temperatures and/or high humidity conditions, it may become
Elongation % (1) 1.85-2.10% difficult to process. Roving that stiffens during storage should still be
Size Level % 1.00 useable. However, a thorough evaluation of the processing characteristics
(e.g. resin wet out, spread ability) relative to the customer’s operation is
Linear Density (w/size) (g/km) 1645
strongly recommended.
Density (g/cc) 1.80
Filament Dia. (µm) 7 Safety & Handling:
(1) Modulus/Elongation based on JIS R7601 Carbon Fibers contain ingredients which could be harmful if mishandled.
(strain range of 0.4-0.6%) unless otherwise noted Contact with skin and eyes should be avoided and necessary protective
(2) ASTM D4018 (strain range of 0.1-0.6%) equipment and clothing should be worn. Individuals should wash with soap
and water before eating, drinking, or using toilet facilities. Individuals should
observe conditions of good industrial hygiene and safe working practice.
For more detailed instructions on handling please see the MSDS sheet.
Resin Compatibility:
2393, 24K Carbon Fiber Tow, is compatible with Polyester, Vinyl Ester,
and Epoxy Resins.
Information present herein has been compiled from sources considered to be dependable and is accurate and Fibre Glast Developments Corporation
reliable to the best of our knowledge and belief but is not guaranteed to be so. Nothing herein is to be construed as 385 Carr Drive
recommending any practice or any product violation of any patent or in violation of any law or regulation. It is the Brookville, Ohio 45309
user’s responsibility to determine for himself the suitability of any material for a specific purpose and to adopt such Phone – 800.214.8579
safety precautions as may be necessary. We make no warranty as to the results to be obtained in using any material Fax – 937.833.6555
PDCT-PDS-00267-C-10/10-CG
and, since conditions of use are not under our control, we must necessarily disclaim all liability with respect to the www.fibreglast.com
use of any material supplied by us.
©Copyright 2010 Fibre Glast Developments Corporation Page 1 of 1