b3540v Leanburn Gas Genset

You might also like

Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

Fact Sheet

Gas engines
Bergen B35:40V lean-burn gas engine, Marine

Features
– Compact and powerful
– exceptionally low emissions of NOx,
CO2, SOx and particulates
– certified to meet IMO Tier III requirements
– low energy consumption
– service friendly
– optimum response at all engine load
points (Variable Turbo Geometry)
– super silent resilient mounting
– stable frequency
– 24/7 support by Rolls-Royce global
service network

Choose Rolls-Royce engines for cost-effective operation.


For more than sixty years of operation, we have produced four stroke medium speed engines
for marine propulsion, marine generating set and power generation to customers world wide.

Technical data for the Rolls-Royce B-engine at 720/750 rpm


Engine type B35:40V12AG B35:40V16AG

Number of cylinders 12 16

Engine speed r/min 720/750 720/750

Mean piston speed m/s 9.6/10 9.6/10

Max.cont rating kW 5472/5700 7390/7700

Max.cont rating altern, (h=0.97) kW 5307/5530 7090/7390

Max.cont rating altern, (Cosf=0.8) kVA 6634/6912 8065/8400

Mean effective pressure (BMEP) bar 20 20

Specific energy consumption kJ/kWh 7475/7475 8065/8400

Specific lubricating oil consumption g/kWh 0.4 0.4

Cooling water temp. engine outlet °C 90 90

The performance data is based on


Marine gas engine ratings are according to ISO 3046-1, at maximum 45°C Gas feed temperature is 20-40°C. Minimum gas feed pressure to Gas
ambient air temperature and maximum 32°C sea water temperature. Regulating Unit to be 4,5 barg.
Specific fuel gas consumption excluding engine driven pumps is based on
reference natural gas with Methane number above 70 and net calorific value
of 36 MJ/nm3. If there are engine driven pumps, add 0,5% for each pump.
08.Engines-1 of 2-30.08.12

Waste heat recovery Note


Necessary data for arranging waste heat Due to continuous development, some data
recovery plants (exhaust gas and cooling water) may be changed without notice.
are available upon request.
Fact Sheet

A B

Principal dimensions
Cylinder dia. 350 mm. Piston stroke 400 mm.
All dimensions in mm.

Engine type A B C D E Engine** Alternator Total

B35:40V12AG 3948 6366 10306 2712 4620 66500 kg 21550 kg 88050 kg

B35:40V16AG 3561 7947 11507 3306 4587 81280 kg 24300 kg 105580 kg

Dimensions given apply for resiliently mounted engine. Choice of alternator may effect the given dimensions and weights.
Engine** = weight engine and foundation.
Weight dry engine.

08.Engines-2 of 2-30.08.12

Rolls-Royce Marine AS © 2012 Rolls-Royce plc


Engines - Bergen Whilst this information is given in good faith, no
P.O. Box 924, N-5808 Bergen, Norway warranty or representation is given concerning such
Tel: +47 815 20 070 Fax: +47 55 53 61 04 information, which must not be taken as establishing
E-mail: engines.bergen@rolls-royce.com any contractual or other commitment binding upon
www.rolls-royce.com Rolls-Royce plc or any of its subsidiary or associated
companies.

You might also like