Professional Documents
Culture Documents
MAN12384-11, Installation Manual For RDI 08-001SJ in Outer Cabinet
MAN12384-11, Installation Manual For RDI 08-001SJ in Outer Cabinet
Revision record
Version Date Description
1.0 2018-04-26 Original release of document
1.1 2018-10-01 M1nor update
Contents
2 INTRODUCTION .......................................................................................................5
2.1 Load on talker ............................................................................................................5
2.2 Avoidance of ground loops ........................................................................................5
2.3 Behavior following power down .................................................................................5
1.1 References
MAN11614-12 Installation manual for RDI 08-001S and RDI 08-001SJ, remote serial
data interface.
2 Introduction
This manual is only related to how the RDI 08-001SJ must be installed in the outer cabinet supplied
with the product.
The RDI 08-001SJ may be included to an existing IEC 61612-1/2 talker bus without having to use
an array of terminal blocks as junction points.
System overview
The RDI 08-001SJ is designed for being included into an existing installation. It is important that
the RDI 08-001SJ does not interfere with the existing equipment. In order to achieve this, the
installation must comply with IEC61162-1 and IEC61162-2.
For S-VDRs:
A verification of the recorded data according the VDR’s operation and maintenance manual. ref
IEC 61996-2 section 5.5.2d.