Professional Documents
Culture Documents
En MPE Tube - Multi Port Extruded Tube For Condensers EN AW-3102 Temper H112
En MPE Tube - Multi Port Extruded Tube For Condensers EN AW-3102 Temper H112
Material specification
1 Scope ................................................................................................................................. 2
2 Normative references ........................................................................................................ 2
3 Material and temper .......................................................................................................... 2
4 Dimensions and tolerances .............................................................................................. 2
5 Visual inspection ............................................................................................................... 2
6 Chemical composition ...................................................................................................... 2
7 Mechanical properties....................................................................................................... 2
8 Leak-tightness ................................................................................................................... 3
9 Formability ......................................................................................................................... 3
10 Applicable regulations ...................................................................................................... 3
Change Index
1 Scope
Multi-Port Extruded tubes for BSH condensers after 5700 0000134673
2 Normative references
EN 12392 Aluminium and aluminium alloys. Wrought products – Special
requirements for products intended for the production of pressure
equipment
DIN EN 573-3 Aluminium and aluminium alloys – Chemical composition and form of
wrought products – Part 3: Chemical composition and form of products
5 Visual inspection
Requirements The surface of the tube must be clean, smooth, metallic bright; without
mechanical damages, bowl formations, blisters, foreign inclusions, metal
contaminations, pressing residues or other defects that can impact the
corrosion resistance
6 Chemical composition
Requirements Si max. 0.40
Fe max. 0.70
Cu max. 0.10
Mn max. 0.05-0.40
Zn max. 0.30
Ti max. 0.10
Other max. 0.05 % in weight
Al Remainder
7 Mechanical properties
Requirements Tensile strength Rm min. 80 N/mm²
Stress at yield Rp0,2 min. 40 N/mm²
Elongation A100 min. 35 %
8 Leak-tightness
Requirements Tubes must be free from leaks
9 Formability
Requirements without cracks and sink marks
Evaluation bending test after DIN EN ISO 1519 with Ø12mm mandrel
10 Applicable regulations
The product must be free form hazardous substances in concentrations above the limits
specified in BSH “List of Prohibited Hazardous Substances” (www.bsh-group.com - >
Purchasing - > forms).