Professional Documents
Culture Documents
Kanthal-Am100-En-V2021-02-04 13 - 49 Version 1
Kanthal-Am100-En-V2021-02-04 13 - 49 Version 1
ADDITIVE MANUFACTURED
PRODUCTS
DATASHEET
Kanthal® AM100 is an advanced heat resistant ferritic iron-chromium-aluminium alloy (FeCrAl alloy) specially
developed for additive manufacturing. This allows Kanthal to offer printed products with customized geometries
that can be difficult to produce by traditional methods. Examples of products printed with Kanthal® AM100 are
heating elements, burner nozzles, and protective shells, fittings and manifolds, etc.
The printed Kanthal® AM100 material has high strength and very good form stability at high temperatures. The
material forms a highly protective aluminium oxide layer, which gives excellent protection in most demanding
high temperature furnace environments, e.g. oxidizing, sulphidizing, and carburizing.
CHEMICAL COMPOSITION
C% Si % Mn % Cr % Al % Fe %
MECHANICAL PROPERTIES
Rp0.2 Rm A20 Hv
(81-89) (96-103)
1 KANTHAL® AM100
PHYSICAL PROPERTIES
Generic data from wrought material.
lb/in3 0.258
Temp. °F 212 392 572 752 932 1112 1292 1472 1652 1832 2012 2192 2372
Ct 1.00 1.01 1.01 1.02 1.03 1.04 1.04 1.05 1.05 1.06 1.06 1.06 1.06
THERMAL CONDUCTIVITY
2 KANTHAL® AM100
Temperature °C 20 600 800 1000 1200
W m-1 K-1 11 20 22 26 27
Btu lb-1 °F-1 0.11 0.13 0.15 0.18 0.17 0.17 0.18
Disclaimer: Recommendations are for guidance only, and the suitability of a material for a specific application can
be confirmed only when we know the actual service conditions. Continuous development may necessitate changes
in technical data without notice. This datasheet is only valid for materials under the trademark Kanthal® .
KANTHAL.COM