Professional Documents
Culture Documents
Robertsons Catalogue 2014 Section 06
Robertsons Catalogue 2014 Section 06
2014 edition
www.lifting.com.au
Load Restraint
Australian Standards state that lashings must be replaced if they are weakened
R
Direction of travel =5 Testraint
R onne
=8RTestraint Direction of travel =5 Testrainst Restraint against
onne onnes sideways movement
=8RTestrainst Restraint
= 50% ofagainst
load
onnes Load sideways movement
10 TonWeight = 50% of load
Load nes
Restraint against 10 TonWeight
nes
forward movement
R
= 5 estraint
Restraint
= 80% ofagainst
load
T nn
forward movement
Reo e
= 80% of load = 5 strainst
Tonn
R es
=5 estraint
RTonn s Restraint against
=5 estraein t sideways movement
Restraint against
Tonn Restraint rearward movement
es = 50% ofagainst
load Restraint
= 50% ofagainst
load
sideways movement rearward movement
= 50% of load = 50% of load
Minimum Horizontal Restraint
Minimum Horizontal Restraint
✗ D
✗
✗ D
R ✗ Ratchet
Assemblies ✗
R
R>D
R>D
15°
15°
Ratchet
Push up
Assemblies
to operate
type
Push up
✗
Chain over load corners to operate
type
Chain over load corners
✗
Dunnage (Less
Beaver back
30° strain involved)
type
✗
Dunnage (Less back
30° strain involved)
✗ Clip-on Winch
Clip-on Winch
Correct load
lashing
Correct load
lashing
lifting.com.au 221
Transport Restraint
Truck winches
Truck Winch Guidelines
› Keep winch tight - not loose
› W
hen in use, ensure that at least
two loops of webbing remain on
winch drum
lifting.com.au 223
Transport Restraint
Ratchet Assemblies
Ratchet Assembly Guidelines › All ratchet assemblies are provided
with two protective sleeves.
› Ratchet
with hook and keeper
must be fitted correctly , refer to › Reinforced eyes are provided with
the markings showing the lashing the hook and keeper to add life to
capacity. the unit.
› T
he ratchet has a double claw and › Safety and ID labels are sewn
locking action safety system that into the webbing for traceability
prevents it accidently slipping off the with lashing capacity and date of
load. manufacture shown to aid the driver
in adhering to his or her OH&S
› A
ll webbing is treated with
responsibilities.
polyurethane, to resist grit
penetration.
All Ratchet assemblies comply to All RTD Assemblies are subject to All RTD straps come complete with
Australian and New Zealand Cargo testing criteria in order to verify their standard hook and keepers, clearly
Restraint System Standards AS/NZS lashing capacities after manufacture/ marked with lashing capacity and I.D.
4380. assembly. marks. Different widths and lengths of
webbing, together with an abundance
Quality User friendly visual features
of various end fittings are available on
RTD Straps are 100% polyester which The lashing capacity is stencilled on request.
is heat set, stretched and polyurethane to the webbing and the two protective
(p.u.) impregnated. This results in low sleeves for easy identification. In
strain, long life, wear resistance, and addition the Maximum Breaking
the durability demanded in flatbed tie- Strain (M.B.S.) (i.e. 4 stripes indicating
down situations. an M.B.S. of 4,000 Kgs., 5 stripes
indicating an M.B.S. of 5,000 Kgs., 10
Traceability
Stripes indicating an M.B.S. of 10,000
All RTD straps come complete with Kgs.) is woven into the webbing.
blue polyester safety labels, identifying
the manufacturer/supplier, the
material the straps are made from,
the standard, the date of manufacture
and the length. The serial number
together with the date of manufacture
is both on the safety label and stitched
into webbing, in the event the label is
dislodged.
Ratchet Assemblies
lifting.com.au 225
Transport Restraint
Click
to shop
online
342313-12 50mm x 12m Winch Replacement Strap 3000kg Hook & Keeper 50 12 2.5 Each
CWS075SD09H 75mm x 9m Strap c/w hook & Keeper S/Duty 3500kg Hook & Keeper 75 9 3 Each
349303R -12 50mm x 12m RTD Replacement Strap 3000kg Hook & Keeper 50 12 2.5 Each
349305R 75mm x 9m RTD Replacement Strap 5000kg Hook & Keeper 75 9 3 Each
349305R-12 75mm x 12m RTD Replacement Strap 5000kg Hook & Keeper 75 12 3.5 Each
Click
to shop
online
lifting.com.au 227
Grade 70 Lashing Chain and Fittings
› Transport Chain is primarily used › All G70 Chain and Fittings are clearly › The yellow chromate (gold) plating
in lashing applications to tie down marked Grade 70 with lashing makes it easily recognisable even
loads on transport equipment. capacity “LC” and size of chain. from a distance.
› Our G70 Chain is high quality and › G70 Chain is supplied in convenient
has undergone stringent testing and resealable poly buckets or tool boxes
quality control. for immediate use and easy storage.
› E
nsure your G70 Chain is marked showing capacity and Australian Standard
for easy viewing and confirmation of load size.
Click
to shop
GRADE 70 LASHINGS & FITTINGS ARE NOT TO BE USED FOR LIFTING PURPOSES online
* NOTE: The use of some grab hooks or systems incorporating grab hooks cause bending to occur on the link of
lashing chain to which the grab hook is engaged. The bending and shearing effect of the hook reduces the strength
of the chain by 25 percent and as such, the lashing capacity (LC) of this type of system must be reduced by 25
percent as prescribed in Australian Standard AS/NZS4344:2001
Claw hooks and winged grab hooks supplied on our assemblies, maintain 100% of the rated strength.
NOT APPROVED FOR OVERHEAD LIFTING
Click
GRADE 70 LASHINGS & FITTINGS ARE NOT TO BE USED FOR LIFTING PURPOSES to shop
* NOTE: The use of some grab hooks or systems incorporating grab hooks cause bending to occur on the link of online
lashing chain to which the grab hook is engaged. The bending and shearing effect of the hook reduces the strength
of the chain by 25 percent and as such, the lashing capacity (LC) of this type of system must be reduced by 25
percent as prescribed in Australian Standard AS/NZS4344:2001
Claw hooks and winged grab hooks supplied on our assemblies, maintain 100% of the rated strength.
NOT APPROVED FOR OVERHEAD LIFTING
lifting.com.au 229
Grade 70 Lashing Chain and Fittings
Product Chain Chain Chain Part Grab Hook Lug Link Slip Hook LC Weight UOM
Code Size Length Number Part Number Part Number Part Number (kg) (kg)
(mm) (m)
412007 7.1 5 145007 354008 353008 356008 3000kg 6.69 Each
Product Chain Chain Chain Part Grab Hook Lug Link LC Weight UOM
Code Size Length Number Part Number Part Number (kg) (kg)
(mm) (m)
410007 7.1 5 145007 354008 353008 3000kg 6.33 Each
GRADE 70 LASHINGS & FITTINGS ARE NOT TO BE USED FOR LIFTING PURPOSES Click
* NOTE: The use of some grab hooks or systems incorporating grab hooks cause bending to occur on the link of to shop
lashing chain to which the grab hook is engaged. The bending and shearing effect of the hook reduces the strength
online
of the chain by 25 percent and as such, the lashing capacity (LC) of this type of system must be reduced by 25
percent as prescribed in Australian Standard AS/NZS4344:2001
Claw hooks and winged grab hooks supplied on our assemblies, maintain 100% of the rated strength.
NOT APPROVED FOR OVERHEAD LIFTING
Product Chain Chain Chain Part Slip Hook Lug Link LC Weight UOM
Code Size Length Number Part Number Part Number (kg) (kg)
(mm) (m)
411007 7.1 5 145007 356008 353008 3000kg 6.31 Each
Click
to shop
Clevis Claw Hooks online
Complies to AS/NZS 4344
f
d
d
h
e
g
w
g
w b
GRADE 70 LASHINGS & FITTINGS ARE NOT TO BE USED FOR LIFTING PURPOSES
* NOTE: The use of some grab hooks or systems incorporating grab hooks cause bending to occur on the link of
lashing chain to which the grab hook is engaged. The bending and shearing effect of the hook reduces the strength
of the chain by 25 percent and as such, the lashing capacity (LC) of this type of system must be reduced by 25
percent as prescribed in Australian Standard AS/NZS4344:2001
Claw hooks and winged grab hooks supplied on our assemblies, maintain 100% of the rated strength.
NOT APPROVED FOR OVERHEAD LIFTING
lifting.com.au 231
Grade 70 Lashing Chain and Fittings
d2 f
d
h
e
h2
s b
d
Product Chain f d e b g w LC Weight UOM
Code Size (mm) (mm) (mm) (mm) (mm) (mm) (kg) (kg) g g
e
(mm)
354006 6 9.2 8.5 46.4 49 9.2 22 2300kg 0.24 Each
354008 7-8 10.4 10.5 49 57 10.5 28 3800kg 0.38 Each
354010 10 12.4 12.5 60.5 66.5 13.5 39 6000kg 0.5 Each
354013 13 19.5 16.5 84 88 18 39 9000kg 0.63 w Each w b b
Click
GRADE 70 LASHINGS & FITTINGS ARE NOT TO BE USED FOR LIFTING PURPOSES to shop
* NOTE: The use of some grab hooks or systems incorporating grab hooks cause bending to occur on the link of online
lashing chain to which the grab hook is engaged. The bending and shearing effect of the hook reduces the strength
of the chain by 25 percent and as such, the lashing capacity (LC) of this type of system must be reduced by 25
percent as prescribed in Australian Standard AS/NZS4344:2001
Claw hooks and winged grab hooks supplied on our assemblies, maintain 100% of the rated strength.
NOT APPROVED FOR OVERHEAD LIFTING
f
g
d
h
w b
f
d
g
e
GRADE 70 LASHINGS & FITTINGS ARE NOT TO BE USED FOR LIFTING PURPOSES
* NOTE: The use of some grab hooks or systems incorporating grab hooks cause bending to occur on the link of
lashing chain to which the grab hook is engaged. The bending and shearing effect of the hook reduces the strength
of the chain by 25 percent and as such, the lashing capacity (LC) of this type of system must be reduced by 25
percent as prescribed in Australian Standard AS/NZS4344:2001
Claw hooks and winged grab hooks supplied on our assemblies, maintain 100% of the rated strength.
NOT APPROVED FOR OVERHEAD LIFTING
lifting.com.au 233
Grade 70 Load Equipment
Grade 70 Loadbinders
Precautions
› A
void injury – operate only by hand › Use only the appropriate size and
and always from a standing position. grade of chain with the loadbinder.
› L
ever type loadbinders generally › Do not use handle extension
store energy which is often rapidly devices, as they may overload the
released, causing the handle to loadbinder and effectively weaken
rotate with substantial force. the lashing system.
› A
lways inspect loadbinders before › Make sure loadbinders are tight
use. Look for signs of wear, bending, before moving. Stop and recheck
cracks or gouges, and replace any tightness frequently.
damaged units.
› Never discard warning instructions.
Keep them and share them with
others using the loadbinder.
Grade 70 Loadbinders
f fCLOSED
CLOSE f OPEN
f OPENED
eeCLOSED
CLOSE e OPENED
e OPEN
c d
g
b
b
f CLOSE
a
e CLOSE a
c
Grade 70 Double Swivel (over centre loadbinder)
Claw Lever Loadbinders with Claw Hooks (Forged) AS/NZS 4344
f OPEN
348000EC 7-8mm c/w eye claw 529 489 280 400 601 633 593 208 3800 3.9 Each
hooks
f OPEN
e OPEN ffOPENED
CLOSE
ffCLOSED
OPEN ee OPENED
CLOSE
OPEN d
eeCLOSED c
d
g
g
GRADE 70 LASHINGS & FITTINGS ARE NOT TO BE USED FOR LIFTING PURPOSES
* NOTE: The use of some grab hooks or systems incorporating grab hooks cause bending to occur on the link of
lashing chain to which the grab hook is engaged. The bending and shearingf OPENeffect of the hook reduces the strength
Click
of the chain by 25 percent and as such, the lashing capacity (LC) of this type of system must be reduced by 25 to shop
e OPEN online
percent as prescribed in Australian Standard AS/NZS4344:2001
d
Claw hooks and winged grab hooks supplied on our assemblies, maintain 100% of the rated strength.
NOT APPROVED FOR OVERHEAD LIFTING
g
lifting.com.au 235
Grade 70 Load Equipment
e OPENED
b
e OPRN
e CLOSED
e CLOSE
c
g
a
b
A
A
B
B
a
A
B
Grade 70 Ratchet Type Loadbinders
DETAIL B B
DETAIL
Yellow Painted Finish – to AS/NZS 4344
e OPENED
b
e OPEN
e CLOSED
e CLOSE
a
a
c
Click
g
b
to shop
online
a
GRADE 70 LASHINGS & FITTINGS ARE NOT TO BE USED FOR LIFTING PURPOSES
* NOTE: The use of some grab hooks or systems incorporating grab hooks cause bending to occur on the link of
lashing chain to which the grab hook is engaged. The bending and shearing effect of the hook reduces the strength
of the chain by 25 percent and as such, the lashing capacity (LC) of this type of system must be reduced by 25
percent as prescribed in Australian Standard AS/NZS4344:2001
Claw hooks and winged grab hooks supplied on our assemblies, maintain 100% of the rated strength.
NOT APPROVED FOR OVERHEAD LIFTING
f CLOSE
f CLOSED f OPEN
f OPENED
e eCLOSED
CLOSE e OPENED
e OPEN
c
d
g
Click
to shop
online
GRADE 70 LASHINGS & FITTINGS ARE NOT TO BE USED FOR LIFTING PURPOSES
* NOTE: The use of some grab hooks or systems incorporating grab hooks cause bending to occur on the link of
lashing chain to which the grab hook is engaged. The bending and shearing effect of the hook reduces the strength
of the chain by 25 percent and as such, the lashing capacity (LC) of this type of system must be reduced by 25
percent as prescribed in Australian Standard AS/NZS4344:2001
Claw hooks and winged grab hooks supplied on our assemblies, maintain 100% of the rated strength.
NOT APPROVED FOR OVERHEAD LIFTING
lifting.com.au 237
Grade 100 Lashing Accessories
User friendliness and meeting all legal Lashing Previous Pewag › Admissible operating temperature:
requirements for lashing is based on capacity LC chain ø Winner Pro -40°C – 200°C (please note WLL
(kN) chain ø reduction at high temperatures)
clear and measurable parameters,
50 10 8
which are already considered
80 13 10 › Quality grade stamping on the
and defined in the planning and
134 16 13 Pewag Winner chain – 100 at a
production process.
distance of 300 mm and 10 on the
› When friction lashing at the same
› 25% higher load capacity than Grade back of each link Pewag Winner Pro
securing capacity (STF) you can
80 components – 10
downsize to a smaller chain
dimension thus also reducing weight › Manufacturer‘s name or symbol for
Grade 80 and costs. easy identification.
Pewag Winner
› The considerably lower weight when › Surface: Chain – transparent lacquer
Lashing capacity
using
Grade 80 Pewag Winner lashing chains finish
Pewag Winner
results in easier handling. Components – orange
10 13
powdercoated – RAL 2004
› Clear identification tags according to
8 10 13
EN12195-3 with G 100 values ensure › Lashing tag: all the required data is
› With the same chain dimension it is safety. shown on the lashing tag.
possible to secure more and heavier
loads than Grade 80. Pewag Winner Data › Compatibility: pewag winner chains
and components can be used
› Chain quality: Pewag Winner
in combination with class G 80
meets the EN818-2 standard with
products that fulfill the EN818 and
modifications (higher mechanical
Grade 80 EN1677 standards. Furthermore, they
values and reduced application
Pewag Winner may be combined with G 100 chains
temperature)
and components from competitors,
Grade 80
› Lashing force: 500 N/mm² as long as these products meet the
Pewag Winner
13 EN818 and EN1677 standards. Do
Weight
Identification, Documentation
› Identification tags
› Manufacturer Certificate
› User Information
› Test certificate
Load binder
Lashing tag
Chain
Clevis sling hook
Connex connecting link
Grab hook with
safety catch
Clevis sling hook
lifting.com.au 239
Grade 100 Lashing Accessories
Meets EN 12195-3 with higher working load limit. 25% higher lashing capacity
than Grade 80 ratchet.
c
Load pin and bush CBH are also available separately.
e
Load binder - chain
Master link - chain
Chain - chain
b b s s
Hook - chain
All hooks with forged safety catch. Safety catch set also available as spare part.
d1
lifting.com.au 241
Grade 100 Lashing Accessories
d1
(mm) (kg)
d2
PW8 7-8 50 71 58 20 12 11 0.4 Each 80 g
PW10 10 80 88 76 22 15 13 0.9 Each 30
PW13 13 134 113 101 26 18 17 1.8 Each 15
e
PW16 16 200 129 118 32 23 19 3.6 Each 8
Used for the shortening of chain sling legs. It’s the first grab hook in grade 100
on the market. Due to its unique design there is no deration in the load capacity.
b
This is due to the four fold feature of the hooks supporting cradle design.
No Deration
d2
d1
Shortening hook, protects against accidental release of the chain. g
e
PWB 8 50 71 58 20 12 11 0.4
PWB 10 80 88 76 22 15 13 0.9
PWB 13 134 113 101 26 18 17 1.8
PWB 16 200 129 118 32 23 19 3.6
b
AW 16 8 70 16 110 60 14 0,53
AW 18 10 100 19 135 75 14 0,92
AW 22 13 152 23 160 90 17 1,60
AW 26 16 200 27 180 100 20 2,46
F S
F S
lifting.com.au 243
Grade 120 Lashing Accessories
Load capacity
Pewag Winner Pro
Grade 80) allows significant weight 60 10 8
reduction. Reducing the weight of the 100 13 10
160 16 13
lashing chain assembly makes it much
easier to use and handle. Additionally, 8 10 13 › Considerably lower weight when
the profile of the chain improves the using Winner Pro for lashing results
› With the same chain dimension it is
bending resistance of the chain. This in easier handling.
possible to secure more and heavier
is significant when loading the chain
loads. An additonal 50% compared › Maximum safety due to special
over a corner.
to Grade 80 and 20% compared to lashing tag made from stainless
› Intelligent profile – because of Grade 100 (direct lashing). steel with separate area for periodic
the intelligent use of material, the inspections.
Nicroman
major characteristics of the chain
Pewag Winner Pro
(i.e. fatigue resistance and bending Pewag Winner Pro Lashing Tag
resistance) have been improved in a Identification
remarkable way, when you compare
Weight
the same cross section of the profile Lashing tags made from stainless
chain with the round steel chain. In 3.350 kg 4.250 kg 7.100 kg 11.200 kg steel material and complete with
order to reach the best mechanical warning marks guarantee a longer life
performance, the material use was Lashing Previous Pewag % than standard lashing tags, thereby
capacity chain Winner Reduction
optimized on effective areas (blue increasing the safety of the lashing
LC weight Pro
area) and reduced on less relevant (kN) chain system.
areas (red area). weight
60 14,5 10,3 29%
100 26,1 15,6 40%
160 37,7 30,7 18%
lifting.com.au 245
Grade 120 Lashing Accessories
Product Code Marking LC Standard Length Length Tension Lever length I D d Weight
(kN) tension closed closed range (mm) (mm) (mm) (kg)
force STF L L (mm)
(daN) (mm) (mm)
RSWP 7/8 Type A 60 1.900 355 500 145 237 20 16 3,20
RSWP 10 Type B 100 3.000 365 510 145 355 26 18 3,80
RSWP 13 Type C 160 2.500 576 866 290 359 31 22 9,90
c
c
e
e
bb s s
d2
PEWAG WINNER PRO Grade 120 Eye Sling Hook
d1
g1
e
For the Pewag Winner Pro Connex System.
All hooks with forged and galvanised safety latch.
h
b
lifting.com.au 247
RUD Grade 120 Lashing Chains
Selection of the lashing chain. 1.2 Due to varying reactions under 1.3 Of particular importance when
load, different components, using chain is to ensure that all the
1.1 The lashing capacity of the
such as: lashing chains; synthetic chains used are of the same grade,
restraint system will be as
lashing systems and; wire ropes (e.g. Grade 70 or Grade 100), and
dependent on the application
are not commonly used together that any fittings or attachments are
and environment as the type of
to secure the same load in the of equal or greater strength.
equipment selected.
same lashing direction, unless they
i.e. The Size, Shape and Weight of have been specifically designed
the load must all be considered to for the purpose. Products such as
determine the correct selection. the ‘Web-Dog’ for example, are
See ‘Safe Load Restraint Guide’ on specifically designed to work with
page 223. Grade 70 chain.
Use
2.1 Inspect all equipment prior to use.
If any sign of nicks, cuts, excessive
wear or stretched links are found
the equipment should not be
used. Australian Standards state
that lashings must be replaced.
lifting.com.au 249
RUD Grade 120 Lashing Chains
Lashing LC Max. load weight [t] (horizontal angle b: 20°-45°; 2 lashing chains per direction)
Chain (daN) Vertical angle a: 0°-30° Vertical angle a: 30°-60°
µ=0.1 µ=0.2 µ=0.3 µ=0.4 µ=0.5 µ=0.6 µ=0.1 µ=0.2 µ=0.3 µ=0.4 µ=0.5 µ=0.6
ICE-VSK 6 3600 6.2 8.4 10.4 13.0 17.4 26.2 4.5 6.3 9.0 12.8 19.2 32.0
VIP-VSK 6 3000 5.2 7.0 8.7 10.9 14.5 21.9 3.8 5.3 7.5 10.7 16.0 26.7
ICE-VSK 8 6000 10.5 14.0 17.4 21.8 29.1 43.9 7.6 10.7 15.0 21.4 32.0 53.4
ICE-VSK 10 10000 17.5 23.4 29.0 36.4 48.6 73.1 12.8 17.9 25.0 35.6 53.4 89.0
ICE-VSK 13 16000 28.0 37.5 46.4 58.2 77.8 117.0 20.5 28.6 40.0 57.1 85.5 142.4
VIP-VSK 16 20000 35.0 46.9 58.1 72.8 97.3 146.3 25.6 35.8 50.0 71.3 106.9 178.0
Vertical angle a
b
a
Horizontal
angle b
Frictional Lashing
RUD Lashing STF = required number of VIP + ICE lashing chains
Chain (daN) (number of lashing chains = factor from Table x load weight (t)
Vertical angle a: 60°-90° Vertical angle a: 30°-60°
µ=0.1 µ=0.2 µ=0.3 µ=0.4 µ=0.5 µ=0.6 µ=0.1 µ=0.2 µ=0.3 µ=0.4 µ=0.5 µ=0.6
VIP-VSK 6 1500 3.6 x 1.6 x 0.9 x 0.6 x 0.4 x 0.2 x 6.3 x 2.7 x 1.5 x 0.9 x 0.6 x 0.3 x
VIP- VSK 8 2500 2.2 x 1.0 x 0.6 x 0.4 x 0.2 x 0.2 x 3.8 x 1.6 x 0.9 x 0.6 x 0.4 x 0.2 x
VIP-VSK 10 2800 2.0 x 0.9 x 0.5 x 0.3 x 0.2 x 0.1 x 3.4 x 1.5 x 0.8 x 0.5 x 0.3 x 0.2 x
ICE-VSK 8/10/13 2800 2.0 x 0.9 x 0.5 x 0.3 x 0.2 x 0.1 x 3.4 x 1.5 x 0.8 x 0.5 x 0.3 x 0.2 x
VIP-VSK 13/16 3600 1.5 x 0.7 x 0.4 x 0.3 x 0.2 x 0.1 x 2.6 x 1.2 x 0.7 x 0.4 x 0.3 x 0.2
Values of both tables refer to: stable load, road transport, no combination with other lashing or securing methods!
D
D2
H maximum
H minimum
H2
W
D
D2
H maximum
H minimum
H2
lifting.com.au 251
Jacks
Product Description Capacity D H2 W Wheelbase Minimum Height Maximum Height Nett UOM
Code (t) (mm) (mm) (mm) Length H minimum H maximum Weight
(mm) (mm) (mm) (kg)
TJK014 Trolley Jack 1.4 50 132 492 410 130 350 11 Each
D
H maximum
H minimum
H2
D
H maximum
H minimum
H2
D
H maximum
H minimum
H2
D
H maximum
H minimum
H2
lifting.com.au 253
General Transport Accessories
Winch Bar
Truckers Winch Bar
Winch bar comes complete with safety trigger and knurled non-slip handle for easy grip (all steel construction and chrome
plated) for use with all Mark IV winches
Transport General
Corner Protector
Product Strap Max. Safe Stretch Qty Per Weight UOM Bags Per
Code Length (mm) Bag Each Carton
(mm) (kg)
340721 533 812 10 0.12 Each 10
Friction Mats
Product Code Description Thickness Length Width Weight UOM
(mm) (mm) (mm) (kg)
350000 Friction Mat 1000 8 1000 1000 5 Each
x 1000 x 8mm
lifting.com.au 255
BRISBANE SOUTH 4 Burchill St Loganholme, Qld 4129 P 07 3801 0811 E Sales.brisbane@jlr.com.au
BRISBANE NORTH 5 Johnstone Rd, Brendale, Qld 4500 P 07 3881 1445 E Sales.brendale@jlr.com.au
GOLD COAST 39 Dover Dve, Burleigh Heads, Qld 4220 P 07 5535 8277 E Sales.goldcoast@jlr.com.au
TOOWOOMBA 345 Taylor St, Toowoomba, Qld 4350 P 07 4634 6566 E Sales.toowoomba@jlr.com.au
MACKAY 179 Boundary Rd, Paget, Qld 4740 P 07 4952 5520 E Sales.mackay@jlr.com.au
MELBOURNE 4/28-30 Little Boundary Rd, Laverton Nth, Vic P 03 9315 1520 E Sales.melbourne@jlr.com.au
DANDENONG 28 Swift Way, Dandenong South, Vic 3175 P 03 9768 3244 E Sales.dandenong@jlr.com.au
www.lifting.com.au