Download as docx, pdf, or txt
Download as docx, pdf, or txt
You are on page 1of 3

POLITEKNIK PENERBANGAN INDONESIA CURUG

TEKNIK PESAWAT UDARA


Jl. Raya PLP Curug Tangerang Prop. Banten Po. Box 509 15001
Telp. (021) 5982203-5, email : sekmen.PPICcurug@gmail.com
CURUG – INDONESIA

TASK CARD
Aircraft S/N Aircraft Reg. Work Order No Company

Aircraft Type Project No. Task Card No. MP Reference No.

Date Release A/C Total Hours. A/C Total Cycles

Task Description :
SEAT BELT SYSTEM (HELICOPTERS S/N 4 THROUGH 3121)
Each seat is equipped with a lap-type safety belt anchored to structure at each side of the seat (Figure 25-1). A
personnel restraint kit is available as an option for pilot and copilot seats (Service Instruction 206-30). Personnel
restraints are available as an option for passenger seats (TB 206-93-144).
RII Required Operational Check Reference
Required
YES NO
YES NO Total Man Hour
Estimated Actual

. Task Required . Mech Sign / Inspector


Date Sign / Date

SEAT BELT SYSTEM (HELICOPTERS S/N 4 THROUGH 3121) — REMOVAL


Remove lap belt (1, Figure 25-1) by removing cotter pin, nut (4), washers (3), and bolt
(2) from airframe fitting at each side of seat.

SEAT BELT SYSTEM (HELICOPTERS S/N 4 THROUGH 3121) — INSTALLATION


1. Lay seat belt (1, Figure 25-1) out on seat with buckle half on inboard side of seat
away from door

2. Install each half to airframe fitting using bolt (2, 5, or 7), washers (3), nut (4 or 6),
and cotter pin where applicable. Install one washer (3) under bolt head and one
washer (3) under nut.

Sheet 1 of 3
POLITEKNIK PENERBANGAN INDONESIA CURUG
TEKNIK PESAWAT UDARA
Jl. Raya PLP Curug Tangerang Prop. Banten Po. Box 509 15001
Telp. (021) 5982203-5, email : sekmen.PPICcurug@gmail.com
CURUG – INDONESIA

TASK CARD
1. Aircraft SN 2. Aircraft Reg. 3. Based on WO 4. Customer 5. Task Card No.
No

Sheet 2 of 3
POLITEKNIK PENERBANGAN INDONESIA CURUG
TEKNIK PESAWAT UDARA
Jl. Raya PLP Curug Tangerang Prop. Banten Po. Box 509 15001
Telp. (021) 5982203-5, email : sekmen.PPICcurug@gmail.com
CURUG – INDONESIA

TASK CARD
1. Aircraft SN 2. Aircraft Reg. 3. Based on WO 4. Customer 5. Task Card No.
No

. Remarks:

. Item Removed Item Installed


Description PN SN Qty. Description PN SN Qty.

I hereby certify that the aircraft has been maintain and Name Amel/Auth Date
inspected in accordance with CASR and determined the No
aircraft is airworthy and safe for flight.

Sheet 3 of 3

You might also like