Professional Documents
Culture Documents
Pre-Assessment Week 1
Pre-Assessment Week 1
1.
Question 1
0 / 1 point
Shift ctrl
2.
Question 2
0 / 1 point
Ellipse line
Circle
3.
Question 3
0 / 1 point
Multiple directions
4.
Question 4
0 / 1 point
MLINE
5.
Question 5
1 / 1 point
ELLIPSE
6.
Question 6
1 / 1 point
Scale
7.
Question 7
1 / 1 point
8.
Question 8
What are the DRAWORDER options available from the Modify panel on the ribbon? Select all that apply.
1 / 1 point
9.
Question 9
0 / 1 point
Press and hold the TAB key and select the objects to be removed.
10.
Question 10
This tool allows you to control which layers are displayed in the layer drop-down list.
1 / 1 point
Layer properties
11.
Question 11
You want to change the color of the mark ups layer in the current viewport only using a layer override.
Select the letter of the correct control to use.
12.
Question 12
0 / 1 point
You can transfer the objects on one more layers into the target layer
13.
Question 13
To create a dashed line that precisely connects the two point objects, which object snap should you use?
NODe
14.
Question 14
To insert a special character from a character map into a text object, which area do you select?
15.
Question 15
To create fillets without trimming the corner(s), which option do you select?
1 / 1 point
NO TRIM
16.
Question 16
You use the Clipboard > Paste as Block method to create a block. The block is:
17.
Question 17
0 / 1 point
When you change a layer property for an xref in the host drawing
18.
Question 18
Select the area on the ribbon to access preset orientations for different user coordinate systems.
0 / 1 point
19.
Question 19
0 / 1 point
The XY plane.
20.
Question 20
1 / 1 point
Aligned.
21.
Question 21
You want to rotate the chair on the left, so it looks like the chair on the right (parallel to the desk). Pick
the point on the chair that should be used as the basepoint.
D
22.
Question 22
23.
Question 23
1 / 1 point
24.
Question 24
You want to adjust the position of a point on this spline. Using the multi-functional grip, which option
should be selected:
Stretch Fit Point
25.
Question 25
To convert a line segment of a polyline to an arc, put the steps in the correct order.
Select the polyline to be edited, Select the middle grip of the line segment., Right click and select
Convert to Arc.
26.
Question 26
27.
Question 27
1 / 1 point
Select the Fillet command, select one line, press and hold the SHIFT key, and select the second line.
28.
Question 28
The Page Setup Manager allows you to preview your plot before you print it out.
To add a custom scale to the scale list, which icon should you select on the status bar.
29.
Question 29
To rotate a viewport:
30.
Question 30
1 / 1 point
31.
Question 31
Export
32.
Question 32
Drawing Compare automatically displays ____________ to indicate the differences between drawings.
0 / 1 point
Revision clouds
33.
Question 33
True
34.
Question 34
1 / 1 point
You will be prompted for the text height every time you create text.
35.
Question 35
1 / 1 point
36.
Question 36
37.
Question 37
Question 38
You are working in a drawing. You select the bottom grip of a dimension as shown and move the
extension line to the left. How does this affect the selected dimension?
0 / 1 point
The extension line adjusts to the new location and the dimension value updates
39.
Question 39
You use the DIMBREAK tool to create the dimension breaks shown. What controls the amount of gap
applied?
40.
Question 40
41.
Question 41
You hover over a dimension and see this symbol displayed. What does this symbol represent?
42.
Question 42
You create a block and place it in your drawing. You modify the block using the Block Editor tool and
save the changes. What happens to the blocks already placed in your drawing?
43.
Question 43
The Block Attribute Manager (BATTMAN) allows you to change all of the following EXCEPT:
1 / 1 point
44.
Question 44
The layer names for an external reference are changed if the external reference is inserted into the host
drawing as a BIND. How are they changed?
The $0$ characters replace the bar symbol.
45.
Question 45
What does the Group Manager allow you to do? Select all that apply.
Modify a group.
46.
Question 46
You select objects in Drawing A. You right-click and select Copy with Basepoint. You specify a basepoint.
You switch to Drawing B. You right-click and select Paste as Block. What is the result?1 / 1 point
Pre-assessment
1.
Question 1
1 / 1 point
Ctrl
Tab
Shift
Alt
Correct
The answer can be found in Create and modify arcs.
2.
Question 2
To combine more than one region into a single region, use the BOOLEAN operation:
1 / 1 point
ADD
FUSE
COMBINE
UNION
Correct
3.
Question 3
1 / 1 point
One direction
Multiple directions
Two directions
Correct
4.
Question 4
To represent a circular hole in a 2D isometric view, use the _______ option in the ELLIPSE command.
1 / 1 point
ISOPLANE
ISOCIRCLE
ISODRAFT
OBLIQUE
Correct
5.
Question 5
Select the area to allow Quick Select to filter for LINE objects in the drawing.
1 / 1 point
C
D
Correct
6.
Question 6
1 / 1 point
Layer
Scale
Color
Name
Correct
7.
Question 7
0 / 1 point
D
B
Incorrect
8.
Question 8
What are the DRAWORDER options available from the Modify panel on the ribbon? Select all that apply.
1 / 1 point
Correct
Correct
Correct
9.
Question 9
0 / 1 point
Press and hold the TAB key and select the objects to be removed.
Press and hold the SHIFT key and select the objects to be removed.
Press and hold the R key and select the objects to be removed.
Press and hold the CTRL key and select the objects to be removed.
Incorrect
10.
Question 10
A __________is like a snapshot of the existing layers and layer settings at the time it is created.
1 / 1 point
Group
Layer state
Layer filter
Block
Correct
11.
Question 11
You want to change the color of the mark ups layer in the current viewport only using a layer override.
Select the letter of the correct control to use.
1 / 1 point
C
Correct
The answer can be found in Create and manage layouts and viewports.
12.
Question 12
Select the letter of the correct tool for applying the oblique option to a dimension.
1 / 1 point
Correct
Question 13
Click on the area of the dialog box that you would use to save the drawing in dxf format.
1 / 1 point
Correct
14.
Question 14
To insert a special character from a character map into a text object, which area do you select?
1 / 1 point
Correct
15.
Question 15
After carefully selecting 20 objects, you realize that you selected one in error. What’s the best solution?
1 / 1 point
Press Esc and select only the ones you want this time.
C. Press and hold SHIFT and select the object that you want to deselect.
Correct
16.
Question 16
You use the Clipboard > Paste as Block method to create a block. The block is:
0 / 1 point
Automatically exploded.
Never exploded.
Unnamed.
Incorrect
17.
Question 17
1 / 1 point
When you change a layer property for an xref in the referenced drawing.
When you change a layer property for an xref in the host drawing.
When a layer property in an xref overrides a layer property in the host drawing.
Correct
The answer can be found in Control external references and properties of referenced layers.
18.
Question 18
Select the area on the ribbon to access preset orientations for different user coordinate systems.
1 / 1 point
Correct
19.
Question 19
1 / 1 point
False
True
Correct
20.
Question 20
Select the method which will align the UCS with the WCS:
1 / 1 point
UCS, Origin
UCS, World
UCS, Previous
Correct
21.
Question 21
You are creating a kitchen elevation. You bring a CAD block of a cabinet into the drawing, but it is too
small. Which scale option will quickly enlarge the cabinet?
1 / 1 point
Reference
Size
Correct
22.
Question 22
The arc on the left needs to be modified so that it looks like the arc on the right. Which method would
work best?
0 / 1 point
Use the FILLET command, select the arc to be modified, press SHIFT and select the smaller arc
Select the endpoint of the grip and stretch the arc into the correct position.
Use the LENGTHEN command, select DYNAMIC, select the arc to be modified, then select the end point
of the smaller arc as the target.
Incorrect
23.
Question 23
1 / 1 point
Changes the color and linetype of the layer where the object is placed
Correct
24.
Question 24
You want to adjust the position of a point on this spline. Using the multi-functional grip, which option
should be selected:
1 / 1 point
Tangent Direction
Correct
25.
Question 25
To convert a line segment of a polyline to an arc, put the steps in the correct order.
1 / 1 point
Select the polyline to be edited, Right click and select Convert to Arc, Select the middle grip of the line
segment.
Select the polyline to be edited, Select the middle grip of the line segment., Right click and select
Convert to Arc.
Select the middle grip of the line segment, Right click and select Convert to Arc, Select the polyline to be
edited.
Right click and select Convert to Arc, Select the middle grip of the line segment, Select the polyline to be
edited.
Correct
The answer can be found in Create and work with polylines: Part 1.
26.
Question 26
After you select the vertex of a six-sided polygon, what multi-grip options are available? Select all that
apply.
1 / 1 point
Add Vertex
Correct
Stretch
Correct
Remove Vertex
Correct
Lengthen
27.
Question 27
The Page Setup Manager allows you to set all of the following EXCEPT:
1 / 1 point
Correct
28.
Question 28
The Page Setup Manager allows you to preview your plot before you print it out.
To add a custom scale to the scale list, which icon should you select on the status bar.
1 / 1 point
Correct
29.
Question 29
To rotate a viewport:
1 / 1 point
Correct
The answer can be found in Create and manage layouts and viewports .
30.
Question 30
1 / 1 point
C
A
Correct
31.
Question 31
1 / 1 point
Save as
Export
Extract
Convert
Correct
32.
Question 32
0 / 1 point
Incorrect
33.
Question 33
0 / 1 point
False
True
Incorrect
34.
Question 34
1 / 1 point
You will be prompted for the text height every time you create text.
The text will use the default text height until it is changed.
Correct
35.
Question 35
1 / 1 point
Correct
36.
Question 36
1 / 1 point
You can look up the correct spelling using the browse button.
Correct
37.
Question 37
0 / 1 point
Incorrect
The answer can be found in Create and adjust multileaders and leaders.
38.
Question 38
You are working in a drawing. You select the bottom grip of a dimension as shown and move the
extension line to the left. How does this affect the selected dimension?
1 / 1 point
The extension line adjusts to the new location and the dimension value remains the same.
The extension line adjusts to the new location and the dimension value updates.
Correct
The answer can be found in Create and edit annotation with advanced dimensioning techniques.
39.
Question 39
1 / 1 point
Place dimensions using object tracking and entering in the same value
Correct
The answer can be found in Create and edit annotation with advanced dimensioning techniques.
40.
Question 40
If a scale is not assigned to an annotation object but is used in a viewport, the annotation object is:
1 / 1 point
Too large
Too small
Not displayed.
Correct
41.
Question 41
You hover over a dimension and see this symbol displayed. What does this symbol represent?
1 / 1 point
Correct
42.
Question 42
To add annotation scales to an annotative object, place the steps in order of execution:
A. Click Add.
B. Right-click in the drawing area and choose Annotative Object Scale Add/Delete Scales.
C. Select the scale add. Note: Hold Ctrl to select more than one scale.
1 / 1 point
D,B,A,C,E.
C, B , A , E , D .
D, E , A , B , C .
C,B,A,D,E.
Correct
43.
Question 43
The Block Attribute Manager (BATTMAN) allows you to change all of the following EXCEPT:
1 / 1 point
Correct
44.
Question 44
Which of the following can hyperlinks be linked to? Select all that apply.
0 / 1 point
Another software.
Correct
Correct
45.
Question 45
You have a drawing with several blocks in it. You want to create a tool palette with the blocks in the
drawings. What is the fastest and easiest way to do this using the Autodesk Design Center?
0 / 1 point
Launch the Design Center, locate the drawing, select the Blocks folder, right-click, and select CREATE
TOOL PALETTE.
Launch the Design Center, launch the tool palette, create a new tool palette for the blocks, highlight all
the desired blocks in the Design Center, right-click and select Copy, return to the tool palette, right-click
and select Paste
Launch the Design Center, launch the tool palette, create a new tool palette for the blocks, and drag and
drop the blocks from the Design Center onto the palette one at a time.
Incorrect
46.
Question 46
You select objects in Drawing A. You right-click and select Copy with Basepoint. You specify a basepoint.
You switch to Drawing B. You right-click and select Paste as Block. What is the result?
1 / 1 point
Correct