Professional Documents
Culture Documents
Nested End Table: V 1.0 Owners Manual & Assembly Instructions
Nested End Table: V 1.0 Owners Manual & Assembly Instructions
Nested End Table: V 1.0 Owners Manual & Assembly Instructions
Have a question? Please contact Customer Service at 877-707-7533 for the quickest service. We are open Monday -
Friday from 9:00 a.m. - 5:00 p.m. (EST) or you can email us at
claims@classicbrands.com.
PARTS
STEP 1
1 C
2
2
1
C
B
3 1
C
B
• Place two parts (1) side by side as shown. Attach part (2) to the top right corner. Attach part (3) to the
bottom left corner. Use Allen wrench Part (B) and screws part (C) from the exterior to fasten both parts (2)
and part (3).
• Coloque dos piezas (1) lado a lado como se muestra. Fije la pieza (2) a la esquina superior derecha. Fije la
pieza (3) a la esquina inferior izquierda. Use la llave Allen (B) y los tornillos (C) desde el exterior para sujetar las
piezas (2) y la pieza (3).
• Placez deux pièces (1) l’une à côté de l’autre comme illustré. Raccordez la pièce (2) au coin supérieur droit.
Raccordez la pièce (3) au coin supérieur gauche. Utilisez la clé Allen pièce (B) et vis pièce (C) à partir de
l’extérieur pour relier les pièces (2) et pièce (3).
STEP 2
3 B
A B A
2 1 A 1
1
4
• Lay part (4) on the floor with screw holes facing upwards and attach above leg assembly from previous
step using screws (A). Assembly must be attached with part (2) facing part (4) as shown.
• Coloque la pieza (4) en el piso con los orificios de los tornillos hacia arriba y fije el ensamblaje de la pata
del paso anterior usando los tornillos (A). El ensamblaje debe estar unido con la pieza (2) mirando hacia la
pieza (4), como se muestra.
• Posez la pièce (4) sur le sol avec les trous de vis dirigés vers le haut et raccordez la partie supérieure du
pied de l’étape précédente à l’aide des vis (A). Le bloc doit être raccordé à la pièce (2) opposé à la pièce (4),
comme illustré.
ASSEMBLY INSTRUCTIONS
STEP 3
B C 6
5
C
B
5
• Place two parts (5) side by side as shown. Attach part (6) to the top right corner. Attach part
(7) to the bottom left corner. Use Allen wrench Part (B) and screws part (C) from the exterior to
fasten both parts (6) and part (7).
• Coloque dos piezas (5) lado a lado como se muestra. Fije la pieza (6) a la esquina superior
derecha. Fije la pieza (7) a la esquina inferior izquierda. Use la llave Allen (B) y los tornillos (C)
desde el exterior para sujetar las piezas (6) y la pieza (7).
• Placez deux pièces (5) l’une à côté de l’autre comme illustré. Raccordez la pièce (6) au coin
supérieur droit. Raccordez la pièce (7) au coin supérieur gauche. Utilisez la clé Allen pièce (B) et
vis pièce (C) à partir de l’extérieur pour relier les pièces (6) et pièce (7).
ASSEMBLY INSTRUCTIONS
STEP 4
7
B
A B
A A
6 5
5
5 8
8
• Lay part (8) on the floor with screw holes facing upwards and attach above leg assembly from
previous step using screws (A). Assembly must be attached with part (6) facing part (8) as shown.
• Coloque la pieza (8) en el piso con los orificios de los tornillos hacia arriba y fije el ensamblaje de
la pata arriba del paso anterior usando los tornillos (A). El ensamblaje debe estar unido con la
pieza (6) mirando hacia la pieza (8) como se muestra.
• Posez la pièce (8) sur le sol avec les trous de vis dirigés vers le haut et raccordez la partie
supérieure du pied de l’étape précédente à l’aide des vis (A). Le bloc doit être raccordé à la pièce
(6) opposé à la pièce (8), comme illustré.
ASSEMBLY INSTRUCTIONS
STEP 5 C
10
10
C
B
9
9
11
C
B
9
• Place two parts (9) side by side as shown. Attach part (10) to the top right corner. Attach part (11) to the
bottom left corner. Use Allen wrench Part (B) and screws part (C) from the exterior to fasten both parts (10)
and part (11).
• Coloque dos piezas (9) lado a lado como se muestra. Fije la pieza (10) a la esquina superior derecha. Fije la
pieza (11) a la esquina inferior izquierda. Use la llave Allen (B) y los tornillos (C) desde el exterior para sujetar
las piezas (10) y la pieza (11).
• Placez deux pièces (9) l’une à côté de l’autre comme illustré. Raccordez la pièce (10) au coin supérieur droit.
Raccordez la pièce (11) au coin supérieur gauche. Utilisez la clé Allen pièce (B) et vis pièce (C) à partir de
l’extérieur pour relier les pièces (10) et pièce (11).
STEP 6
11
B
A B A
10 9
A 9
9 12 12
• Lay part (12) on the floor with screw holes facing upwards and attach above leg assembly from previous
step using screws (A). Assembly must be attached with part (10) facing part (12) as shown.
• Coloque la pieza (12) en el piso con los orificios de los tornillos hacia arriba y fije el ensamblaje de la pata
del paso anterior usando los tornillos (A). El ensamblaje debe estar unido con la pieza (10) mirando hacia la
pieza (12), como se muestra.
• Posez la pièce (12) sur le sol avec les trous de vis dirigés vers le haut et raccordez la partie supérieure du
pied de l’étape précédente à l’aide des vis (A). Le bloc doit être raccordé à la pièce (10) opposé à la pièce
(12), comme illustré.
ASSEMBLY INSTRUCTIONS
WARRANTY
CLASSIC BRANDS SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE
OF THIS PRODUCT OR ARISING OUT OF ANY BREACH OF THIS WARRANTY AND THE EXCLUSIVE REMEDY FOR BREACH
OF THIS WARRANTY SHALL BE REPLACEMENT OF THE PRODUCT. THE EXPRESS LIMITED WARRANTY SET FORTH
HEREIN IS THE SOLE WARRANTY GIVEN BY CLASSIC BRANDS, SHALL ONLY EXTEND TO THE ORIGINAL PURCHASER
AND SHALL NOT EXTEND TO ANY SUBSEQUENT OWNER OR OTHER TRANSFEREE OF THE PRODUCT. THE REMEDIES
DESCRIBED ABOVE ARE YOUR SOLE AND EXCLUSIVE REMEDIES AND OUR ENTIRE LIABILITY FOR ANY BREACH OF THIS
LIMITED WARRANTY. OUR LIABILITY SHALL UNDER NO CIRCUMSTANCES EXCEED THE ACTUAL AMOUNT PAID BY YOU
FOR THE DEFECTIVE PRODUCT. FOR SALES TO ANY PURCHASER, OTHER THAN THE ORIGINAL PURCHASER (AS
DEFINED HEREIN), ALL IMPLIED WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR USE, ARE EXCLUDED AND DISCLAIMED. This Limited
Warranty is made exclusively by Classic Brands and is not made on behalf of its distributors or any other party and no one is
authorized to assume or undertake for Classic Brands any other liability in connection with the sale of the product. Some
jurisdictions do not allow for the disclaimers of implied warranties or the exclusion of limitation of incidental or consequential
damages, so the above limitations may not apply to you. In the event that the disclaimer of implied warranties is not applica-
ble to you, then such implied warranties shall only remain in effect during the limited warranty period. All determinations of
applicability and validity of warranty claims hereunder are solely at the discretion of the Classic Brands and such determina-
tion shall be final. THIS LIMITED WARRANTY IS NON-TRANSFERRABLE. The limited warranty set forth in this certificate apply
only to the product accompanied by this Limited Warranty Certificate. This limited warranty gives you legal rights and you
may have other rights which vary from state to state. This limited warranty shall be interpreted in accordance with the laws of
the State of Maryland, without regard to provisions concerning conflict of laws. Classic Brands reserves the right to revise,
cancel, or amend its warranties offered to products sold in the future. The limited warranty set forth herein is valid and
applicable to the product accompanied by this Warranty Certificate.
WARRANTY CLAIMS PROCEDURE: Should a warranty claim arise, the original purchaser shall contact Classic Brands for a
Warranty Claim Form and Instructions. The original purchaser shall complete the Warranty Claim Form, clearly detailing the
defect, and email along with a copy of original sales receipt for the Product to claims@classicbrands.com or as otherwise
directed on the Warranty Claim Form. Warranty Claim Forms that are incomplete or sent without a copy of original sales
receipt will not be processed and will be returned. Upon receipt by Classic Brands of the completed Warranty Claim Form
and the original sales receipt, Classic Brands’ quality control department will verify the defect and/or the applicability of this
Limited Warranty thereto. In the event that this Limited Warranty is applicable, a replacement product of equal or greater
value will be sent to the customer. The original purchaser will be responsible for shipping, handling and processing fees. No
monetary refunds and/or credits will be issued. Please retain this warranty and your original invoice for one (1) year.