Professional Documents
Culture Documents
Design Procedure - Knuckle Joint
Design Procedure - Knuckle Joint
Design Procedure - Knuckle Joint
Design Procedure
Consideration:
• No stress concentration.
• Load is uniformly distributed.
Standard Relations:
d = d1 = selecting higher, d2= 2d, d3=1.5d,
t = 1.25d, t1 = 0.75d, t2 = 0.5d
P = σt . (d2 − d1 ). 𝑡
P = τ . (d2 − d1 ). 𝑡
Check the induced stress with permissible limit
5. Failure of single eye in crushing
P= stress . Area
P = σcr . d1 . t
Check the induced stress with permissible limit
P = σcr . d1 . t1 . 2
Check the induced stress with permissible
limit
Standard Value:
d2 = 2 d3 = 1.5d
Syed Mohiuddin
Assistant Professor
Mechanical Engineering Department
Anjuman college of Engineering & Technology