Professional Documents
Culture Documents
3.5GHz - RRU5818 Technical Specifications (V100R017C10 - Draft A)
3.5GHz - RRU5818 Technical Specifications (V100R017C10 - Draft A)
V100R017C10
Technical Specifications
Issue Draft A
Date 2020-12-29
and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd.
All other trademarks and trade names mentioned in this document are the property of their respective
holders.
Notice
The purchased products, services and features are stipulated by the contract made between Huawei and
the customer. All or part of the products, services and features described in this document may not be
within the purchase scope or the usage scope. Unless otherwise specified in the contract, all statements,
information, and recommendations in this document are provided "AS IS" without warranties, guarantees
or representations of any kind, either express or implied.
The information in this document is subject to change without notice. Every effort has been made in the
preparation of this document to ensure accuracy of the contents, but all statements, information, and
recommendations in this document do not constitute a warranty of any kind, express or implied.
Website: https://www.huawei.com
Email: support@huawei.com
Contents
Product Versions
The following table lists the base station product versions related to the RRU.
Intended Audience
This document is intended for:
● Network planners
● Onsite engineers
● System engineers
Organization
Draft A (2020-12-29)
This is a draft.
Compared with Issue 01 (2020-04-07) of V100R016C10, this issue includes the
following new topics:
3 RRU5818 (2600 MHz) Technical Specifications
Compared with Issue 01 (2020-04-07) of V100R016C10, this issue includes the
following changes.
4 RRU5818 (3500 MHz) Added notes for the table listing capacity
Technical Specifications specifications.
a: ATBR in the TX/RX Mode column indicates that the RF module uses A
transmit channels and B receive channels.
Table 3-3 Output power and carrier configurations of an RRU5818 (2600 MHz)
Frequency Maximum Output Output Power Configuration
Band (MHz) Powera
a: AxC W in the Maximum Output Power column indicates that the number of
TX channels of the RF module is A and the maximum output power of each TX
channel is C W.
NOTE
Receiver Sensitivity
NOTE
The LTE TDD receiver sensitivity, as recommended in 3GPP TS 36.141, is measured under a
5 MHz bandwidth based on the FRC A1-3 in Annex A.1 (QPSK, R = 1/3, 25 RBs) standard.
RF Compliance Standards
Input Power
NOTE
DC RRUs can use external power modules to support AC scenarios. For details about the
types of external power modules supported by each type of RRU, see section "RRU Auxiliary
Devices" in the corresponding RRU hardware description. For details about the external
power modules, see user guides of the corresponding models.
2600 680
Environmental Specifications
Item Specifications
NOTE
The output power of an RRU temporarily decreases when it operates at temperature ranges
10ºC (50ºF) less than or equal to its maximum rated value. This is dependent on
installation scenario, traffic load, and carrier configuration.
NOTE
● Unless otherwise specified, the lightning protection specifications depend on the surge
waveform of 8/20 μs.
● Unless otherwise specified as maximum discharge current, all the surge current items refer
to nominal discharge current.
Item Specifications
a: The validity period is one year. The product can function properly within the
validity period if the storage environment meets the preceding standards.
Table 3-12 CPRI port protocol and rate of an RRU5818 (2600 MHz)
2 CPRI 4.9152/9.8304/10.1376/2
4.33024
The maximum level of cascading between an RRU and a BBU depends on the
cascading capability of the RRU working in different RATs and the bandwidth
resources of the CPRI ports on the BBU side. The following table lists the
maximum levels of cascading and maximum distance between an RRU and a BBU
when the RRU works in a single mode.
NOTE
● For details about the CPRI topologies supported by each RRU model, see RF Unit and
Topology Management.
● For details about the ALD capabilities supported by each RRU model (for example, the
capabilities of RF ports supporting RET antennas and TMAs), see ALD Management.
a: ATBR in the TX/RX Mode column indicates that the RF module uses A
transmit channels and B receive channels.
b: The carrier quantity listed in the Capacity column is the maximum number of
carriers that can be configured for the module working in a single mode. For
details about the carrier combinations for the module working in multiple
modes, see Output Power Configuration in the following table.
Table 4-3 Output power and carrier configurations of an RRU5818 (3500 MHz)
Frequency Maximum Output Output Power Configuration
Band (MHz) Powera
a: AxC W in the Maximum Output Power column indicates that the number of
TX channels of the RF module is A and the maximum output power of each TX
channel is C W.
NOTE
Receiver Sensitivity
NOTE
● The LTE TDD receiver sensitivity, as recommended in 3GPP TS 36.141, is measured under
a 5 MHz bandwidth based on the FRC A1-3 in Annex A.1 (QPSK, R = 1/3, 25 RBs)
standard.
● The NR TDD receiver sensitivity, as recommended in 3GPP TS 38.141, is measured under
a 5 MHz bandwidth based on the Annex A.1 (QPSK, R = 1/3) standard.
RF Compliance Standards
Input Power
NOTE
DC RRUs can use external power modules to support AC scenarios. For details about the
types of external power modules supported by each type of RRU, see section "RRU Auxiliary
Devices" in the corresponding RRU hardware description. For details about the external
power modules, see user guides of the corresponding models.
Item Specifications
3500 690
Environmental Specifications
Item Specifications
NOTE
The output power of an RRU temporarily decreases when it operates at temperature ranges
10ºC (50ºF) less than or equal to its maximum rated value. This is dependent on
installation scenario, traffic load, and carrier configuration.
NOTE
● Unless otherwise specified, the lightning protection specifications depend on the surge
waveform of 8/20 μs.
● Unless otherwise specified as maximum discharge current, all the surge current items refer
to nominal discharge current.
Item Specifications
Item Specifications
a: The validity period is one year. The product can function properly within the
validity period if the storage environment meets the preceding standards.
Table 4-12 CPRI port protocol and rate of an RRU5818 (3500 MHz)
Number of CPRI Ports Protocol Type Port Rate (Gbit/s)
2 CPRI 4.9152/9.8304/10.1376/2
4.33024
The maximum level of cascading between an RRU and a BBU depends on the
cascading capability of the RRU working in different RATs and the bandwidth
resources of the CPRI ports on the BBU side. The following table lists the
maximum level of cascading and maximum distance between an RRU and a BBU
when the RRU works in a single mode. When the RRU works in multimode
concurrency scenarios, the maximum level of cascading and maximum distance
between the multimode RRU and a BBU are determined by the capabilities for the
mode with the lowest capabilities.
NOTE
● For details about the CPRI topologies supported by each RRU model, see RF Unit and
Topology Management.
● For details about the ALD capabilities supported by each RRU model (for example, the
capabilities of RF ports supporting RET antennas and TMAs), see ALD Management.
General Rules
● For an nT RF module (n is 2, 4, or 8), the restriction is as follows: