Professional Documents
Culture Documents
Pedal Tonepad - Stereomicroamp
Pedal Tonepad - Stereomicroamp
2007
Build TWO microamps on this board! They can be connected in series or be used as a dual booster, feed one into the other
and overdrive the 2nd one (you may want to add a volume control at the output) Hard clipping diodes could be added at the
output of either and have a Microamp/Dist+ combo in a single board. Can also be used as a stereo headphone amp, or as a
stereo preamp for portable players or microphones. Use your imagination!. Off board components except for the
potentiometers are not shown on the layout. Trademarks are property of their owners. Visit www.tonepad.com for more!
DAPENOT
470
+ 470 +
51pF
51pF
PMACITS 3002PF
56k
56k
IC 1
15uF 15uF
500kC
500kC
2k7 2k7
1k 1k ½
100k 100k
0.01
0.01
+ + +
10M 10M
4u7 22uF 4u7
IN1 GND GND IN2
0
LAYOUT 0 ½ 1 1½ 2
READY TO TRANSFER
http://www.tonepad.com
2 - 2k7 2 - 51pF
Schematic 2 - 56k Diodes
1N4001 2 - 10k D1 - 1N4001
2 - 470 ICs
AC + 100k
ADAPTOR Potentiometers IC1 - 4558
9v Vb
Vb 2 - 500kC (Rev. Log.)**
22uF 100k
10M
INPUT1 .01uF 1k
5 8 OUTPUT1
*Only needed if FX pops
470
IC1
7 when bypassed - not shown
6 4
15uF on the layout but pads are
500k 2k7
22M 4.7uF 10k available in case needed
51pF
(can anything above 1M)
56k **Dual ganged pot can be
used for simultaneous gain
Vb adjustment of both channels
10M
INPUT2 .01uF 1k
3 8 OUTPUT2
470
1
IC1
15uF
2 4
500k 2k7
22M 4.7uF 10k
51pF
56k