Professional Documents
Culture Documents
Technically Sanctioned For An Amount of '4,21,72,462.00 (Rupees Four Crore Twenty One Lakh
Technically Sanctioned For An Amount of '4,21,72,462.00 (Rupees Four Crore Twenty One Lakh
Technically Sanctioned For An Amount of '4,21,72,462.00 (Rupees Four Crore Twenty One Lakh
Abstract of Cost
SL.
ITEMS OF WORKS AMOUNT
No.
1 BUILDING WORKS : ( PWD, SoR' 2020 )
A REINFORCED CEMENT CONCRETE WORK ` 18773625.00
B BRICK WORK ` 2648790.00
C WOOD WORK & PVC WORK ` 1125564.00
D STEEL WORK ` 126206.00
E ALUMINIUM WORK ` 9490490.00
F FLOORING AND SKIRTING WORK ` 3590339.00
G ROOFING AND CEILING ` 1175153.00
H FINISHING WORK ` 1456712.00
I WATER PROOFING WORK ` 1777181.00
J DISMANTLING AND DEMOLISHING WORK 158727.00
TOTAL (I) ` 40164060.00
2 PLUMBING WORKS: ( SoR' 2020) `
K SANITARY INSTALLATIONS ` 431929.00
L WATER SUPPLY ` 348149.00
TOTAL (II) ` 780078.00
TOTAL (I) + (II) ` 40944138.00
Add. 3% Contingency ` 1228324.00
GRAND TOTAL ` 42172462.00
(Rupees Four crore twenty one lakh Seventy two thousand four hundred sixty two) only
Technically Sanctioned for an amount of `4,21,72,462.00 (Rupees Four crore twenty one lakh
seventy two thousand four hundred sixty two) only
SL.
PARTICULARS OF ITEMS QUANTITY RATE UNIT AMOUNT
NO.
#VALUE!
Page 3
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
Page 4
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
TOTAL ` 18773625.0
B SUB-HEAD : BRICK WORK
6 First class brick work in
superstructure above plinth level &
upto floor-five level including cost of
all materials as required complete:-
#VALUE!
#VALUE!
Page 5
8 Half brick masonry work with first
class bricks in superstructure upto
floor five level including cost of all
materials as required complete:-
In cement mortar 1:4 ( 1 cement : 4
fine sand ). 700.86 Sqm. ` 1363.10 Sqm. ` 955342.0
#VALUE!
#VALUE!
TOTAL ` 2648790.0
C SUB-HEAD : WOOD & PVC WORK
#VALUE!
Page 6
12 Providing and fixing panelling or
panelling and glazing in panelled or
panelled and glazed shutters for
doors, windows and clerestory
windows (Area of opening for panel
inserts excluding portion inside
grooves or rebates to be measured).
Panelling for paneled or paneled
and glazed shutters 25 to 40
mmthick.
#VALUE!
#VALUE!
#VALUE!
Page 7
15 Providing 50 × 50 × 50 mm Gamair
wood plugs including cutting brick
work and fixing in cement mortar 1:3
(1 cement: 3 fine sand) and making
good the walls etc.
25.00 Nos. ` 20.70 No. ` 518.0
#VALUE!
#VALUE!
#VALUE!
#VALUE!
Page 8
#VALUE!
#VALUE!
#VALUE!
#VALUE!
Page 9
24 Providing and fixing 28 mm thick
door shutter made of solid PVC
foam profile with homogenous fine
cellular structure having smooth
outer integral skin having 71mm
width & 28mm thick as vertical &
horizontal styles. Joints are made
using solvent adhesive and GI ‘C
sections (39mm x 19mm x 0.6mm
thick) or M S pipe (40mm x 20mm )
stiffener rame insert & telescopic
polymeric ‘L’ corners .The panel
shall be filled with 3mm thick high -
pressure compact laminate as per
manufacturer’s specifications and
directions f the Engineer-incharge,
cover moulding shall be provided for
covering fixing screws and legant
look.( for W.C. bathroom door
shutter).
#VALUE!
#VALUE!
TOTAL ` 1125564.0
D SUB-HEAD : STEEL WORK
Page 10
26 Providing and fixing in position
collapsible steel shutters with
vertical channels 20x10x2mm at
100 mm centre to centre and braced
with flat iron diagonals 20x5mm size
with top and bottom rail of T-iron
40x40x6mm with 40mm dia. steel
pulleys & with riveted bolts, nuts,
locking arrangement, stoppers,
handles, hold fast /anchor bolt
including embedding in cement
concrete of required grade for fixing
in position, all necessary fittings,
including applying a priming coat of
approved steel primer etc. complete
as required.
#VALUE!
#VALUE!
#VALUE!
Page 11
a) In stringers, treads, landing etc. of
stair cases including use of
chequered plate wherever required,
all complete. 248.40 Kg. ` 95.40 Kg. ` 23697.0
#VALUE!
#VALUE!
TOTAL ` 126206.0
E SUB-HEAD : ALUMINIUM WORK
31 Providing and fixing aluminium work
for doors, windows, ventilators and
partitions with extruded built up
standard tubular sections/
appropriate Z sections and other
sections of approved make
conforming to IS: 733 and IS : 1285,
fixing with dash fasteners of
required dia and size, including
necessary filling up of gaps at
junctions, i.e. at top, bottom and
sides with required EPDM
rubber/neoprene gasket etc.
Aluminium sections shall be smooth,
rust free, straight, mitred and jointed
mechanically wherever equired
including cleat angle, aluminium
snap beading for glazing / paneling,
C.P. brass / stainless steel screws,
all complete as per architectural
drawing and the direction of
Engineerincharge. (Glazing and
paneling and dash fasteners to be
paid for separately) :-
#VALUE!
Page 12
(b) For shutters of doors, windows &
ventilators including providing and
fixing hinges / pivots and making
provision for fixing fittings wherever
required including the cost of EPDM
rubber / neoprene gasket required
( Fittings shall be paid for separately
):-
#VALUE!
#VALUE!
Page 13
a) 764.03 sqm ` 1309.90 sqm ` 1000796.0
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
Page 14
37 Designing, fabricating, testing, installing
and fixing in position Curtain Wall with
Aluminium Composite Panel Cladding,
with open grooves for linear as well as
curvilinear portions of the building , for
all heights and all levels etc. including:
(a) Structural analysis & design and
preparation of shop drawings for
pressure equalisation or rain screen
principle as required, proper drainage of
water to make it watertight including
checking of all the structural and
unctional design.
(b) Providing, fabricating and supplying
and fixing panels ofaluminium
composite panel cladding in pan shape
in metalic colour of approved shades
made out of aluminium composite panel
material of approved thickness and
specification. The aluminium composite
panel cladding sheet shall be coil
coated, with Kynar 500 based PVDF /
Lumiflon based fluoropolymer resin
coating of approved colour and shade
on face # 1 and polymer (Service)
coating on face # 2 as specified using
stainless steel screws, nuts, bolts,
washers, cleats, weather silicone
sealant, backer rodsetc.
Page 15
(c) The fastening brackets of Aluminium
alloy 6005 T5 / MSwith Hot Dip Galvanised
with serrations and serratedwashers to
arrest the wind load movement, fasteners,
SS 316Pins and anchor bolts of approved
make in SS 316, Nylon separators to
prevent bi-metallic contacts all complete
required to perform as per specification and
drawing The item includes cost of all
material & labour component, the cost of all
mock ups at site, cost of all samples of the
individual components for testing in an
approved laboratory, field tests on the
assembled working curtain wall with
aluminium composite panel cladding,
cleaning and protection of the curtain wall
with aluminium composite panel cladding till
the handing over of the building for
ccupation. Base frame work for ACP
cladding is payable under the relevant
aluminium item.s The ontractor shall provide
curtain wall with aluminium composite panel
cladding, having all the performance
characteristics all complete , as per the
Architectural drawings, as per item
description, as specified, as per the
approved shop drawings and as directed by
the Engineer-in-Charge.However, for the
purpose of payment, only the actual area on
the external face of the curtain wall with
Aluminum Composite Panel Cladding
(including width of groove) shall be
measured in sqm. up to two decimal places."
Page 16
Aluminium Composite Panels of
4mm total thickness with Top coil –
0.50mm AA3003 / AA3105 /
AA5005 Grade manufactured as per
IS-737 1986, FR Grade Class B1
with 3mm Mineral Core with
minimum 70-72% Inorganic content
(Aluminium Hydroxide and
Magnesium Hydroxide) 28-30%
Organic content (LDPE) conforming
to ASTM E-119- 16,18 and EN
13501-1, class B1,and Bottom coil –
0.50mm AA3003 / AA3105 /
AA5005 Grade, manufactured as
per IS- 737 1986 with minimum 25
microns lead free PVDF Coating
onforming to AAMA2605 on top coil
and Service
coating on Back Coil (4 - 6 microns)
having minimum panel
weight of 7.5 Kg/m2
#VALUE!
Page 17
38 Design supply & installation of
suspended Spider Glazing system
designed to withstand the wind
pressure as per IS 875 (Part-III).
The Suspended System held with
Spider Fittings of SS-316 Grade
Steel of approved manufacturer with
glass panel having 12 mm thick
clear toughened glass held together
with SS- 316 Grade Stainless steel
Spider & bolt assembly with
laminated glass fins 21 mm thick.
The Glass fins and glass panel
assembly shall be connected to
Slab/ beams by means of SS- 316
Grade stainless steel brackets &
Anchor bolts and at the bottom
using SS channel of 50x25x2mm
using fastener & anchor bolts, non
staining weather sealants of
approved make, Teflon/ nylon
bushes and separators to prevent
bimetallic contacts, all complete to
perform as per specification and
approved drawings. The complete
system to be designed to
accommodate thermal expansion &
seismic movements etc. The joints
between glass panels (6 to 8 mm)
and gaps at the perimeter & in U
channel of the assembly to be filled
with non staining weather sealant,
so as to make the entire system fully
water proof & dust proof. 171.60 mtr ` 8106.40 Mtr ` 1391058.0
The rate shall include all design,
Engineering and shop drawing
including approval from structural #VALUE!
designer, labour, T&P, scaffolding,
other incidental charges including TOTAL ` 9490490.0
F wastage,
SUB-HEAD : enabling
FLOORING temporary
AND SKIRTING WORK
services all fitting fixers nut bolts,
39 Providing and laying ceramic
washer, Buffer plates, fastener, floor
tiles in different sizes
anchors, SS channel laminated (thickness to
be specified by the manufacturer)
glass etc. all complete. For the of
1st quality conforming
purpose of to IS : 15622
payment, actual
-elevation
2017 of approved make inincluding
area of Glazing colours
such as White,
thickness of jointsIvory,
and theGrey, Fume
portion of
Red Brown, laid over 20
Glass panel inside the SS channelmm thick
cement
shall be mortar 1:4 (1 cement : 4 fine
measured.
sand), Jointing with grey cement
slurry @ 3.3 kg/sqm including
pointing the joints with white cement
and matching pigment etc.
complete.
Mat Finish Tiles
Page 18
Ceramic Tiles 1st quality 300 x
300mm in all shades and
designs 2008.93 Sqm. ` 774.40 Sqm. ` 1555712.0
#VALUE!
#VALUE!
#VALUE!
#VALUE!
Page 19
43 Providing and fixing Marble stone in
floors over 20 mm thick bed of
cement mortar 1 : 4 ( 1 cement : 4
fine sand ) jointed with ordinary
cement slurry including pointing with
white cement mixed with of
matching shade, including rubbing
and polishing complete.
#VALUE!
#VALUE!
#VALUE!
Page 20
46 Providing and laying cement
concrete 1:2:4 (1 cement: 2 fine
sand : 4 graded well burnt brick
aggregate) flooring finished with a
floating coat of neat cement
including
cement slurry, rounding of edges
and strips and cost of glass strips
etc. complete.
#VALUE!
#VALUE!
TOTAL ` 3590339.0
G SUB-HEAD : ROOFING AND CEILING WORK
48 Providing corrugated G.S. sheet
roofing including vertical/curved
surface fixed with polymer coated J
or L hooks, bolts and nuts 8 mm
diameter with bitumen and G.I.
limpet ashers or with G.I. limpet
washers filled with white lead and
ncluding a coat of approved steel
primer and two coats of approved
paint on overlapping of sheets
complete (up to any pitch in
horizontal/ vertical or curved
surfaces) excluding the cost of
purlins, rafters and trusses and
including cutting to size and shape
wherever required.
#VALUE!
Page 21
49 Providing ridges or hips of width 60
cm overall width plain G.S. sheet
fixed with polymer coated J or L
hooks, bolts and nuts 8 mm dia G.I.
limpet and bitumen washers
complete.
#VALUE!
#VALUE!
(a) Coupler
110mm 816.00 Nos. ` 123.60 Each ` 100858.0
#VALUE!
#VALUE!
#VALUE!
#VALUE!
Page 22
(e) Plain shoe
110 mm 816.00 Nos. ` 118.00 Each ` 96288.0
#VALUE!
#VALUE!
100mm
14.00 Nos. ` 97.20 Each ` 1361.0
#VALUE!
#VALUE!
TOTAL ` 1175153.0
H SUB-HEAD : FINISHING WORK
55 12 mm cement plaster of mix
(a) In cement mortar 1 : 4 ( 1 cement :
4 fine sand ) 1346.58 Sqm. ` 174.80 Sqm. ` 235382.0
#VALUE!
Page 23
56 15 mm cement plaster on the rough
side of single or half brick wall of
mix:
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
Page 24
61 Applying priming coat [Payment
shall be made after submission of
Test Certificate issued by the
Manufacturer] :
#VALUE!
#VALUE!
#VALUE!
TOTAL ` 1456712.0
I SUB-HEAD:WATER PROOFING WORK
64 Grading roof for water proofing
treatment complete as required as
per direction of the Engineer-in-
charge with :
Page 25
(a) Cement concrete 1:2:4 (1 cement :
2 fine sand : 4 graded stone
aggregate 20 mm nominal size)
130.13 Cum ` 10554.10 Cum ` 1373405.0
#VALUE!
#VALUE!
TOTAL ` 1777181.0
J SUB-HEAD : DISMANTLING AND DEMOLISHING WORK
65 Demolishing reinforced cement
concrete manually /by mechanical
means including stacking of steel
bars properly and disposal of
unserviceable material with all lifts
and upto 50 m lead etc. complete as
per direction of the Engineer- in-
charge.
#VALUE!
#VALUE!
#VALUE!
Page 26
68 Dismantling steel work in built up
section in channels, angles, tees,
flats including all gusset plates,
bolts, nuts, cutting rivets, welding
including dismembering and
stacking of serviceable materials
and unserviceable materials
separately with all lifts and upto a
lead of 50 m etc. complete as per
direction of the Engineer- in-charge.
#VALUE!
Total ` 158727.0
PLUMBING WORKS
K SUB-HEAD : SANITARY WORKS
69 Providing and fixing water closet
squatting pan (Indian type W.C. pan
) with 100mm sand cast Iron P or S
trap, 10 litre low level white P.V.C.
flushing cistern with manually
controlled device (handle lever)
conforming to IS : 7231, with all
fittings and fixtures complete
including cutting and making good
the walls and floors wherever
required :
#VALUE!
Page 27
#VALUE!
#VALUE!
#VALUE!
#VALUE!
Page 28
#VALUE!
(b) Flexible pipe
32 mm dia 30.00 Nos. ` 93.90 Each ` 2817.0
#VALUE!
76 Providing and fixing 600x450 mm
bevelled edge mirror of superior
glass (of approved quality) complete
with 6 mm thick hard board ground
fixed to wooden cleats with C.P.
brass screws and washers
complete.
30.00 Nos. ` 834.10 Each ` 25023.0
#VALUE!
#VALUE!
#VALUE!
#VALUE!
Page 29
80 Providing and fixing PTMT soap
Dish Holder having length of
138mm, breadth 102mm, height of
75mm with concealed fitting
arrangements weighing not less
than 106 gms.
40.00 Nos. ` 122.50 Each ` 4900.0
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
Page 30
100x100x100 mm
Sand cast iron S&S as per IS - 1729
12.00 Nos. ` 634.00 Each ` 7608.0
#VALUE!
#VALUE!
#VALUE!
#VALUE!
100 mm
Sand cast iron S&S as per IS - 1729
12.00 Nos. ` 334.10 Each ` 4009.0
#VALUE!
#VALUE!
Page 31
Sand Cast Iron S&S as per IS:
1729. 10.00 Nos. ` 911.70 Each ` 9117.0
#VALUE!
#VALUE!
TOTAL ` 431929.0
L SUB-HEAD : WATER SUPPLY
93 Providing and fixing G.I. pipes of
medium class as per IS : 1239 with
latest amendment complete with
G.I. fittings and clamps, including
cutting and making good the walls
etc. omplete as per CPWD
specification and direction of the
Engineer - in - charge.
Internal work - Exposed on wall.
#VALUE!
#VALUE!
#VALUE!
#VALUE!
Page 32
94 Making connection of G.I.
distribution branch with G.I. main
following sizes by providing and
fixing tee, including cutting and
threading the pipe etc. complete as
per CPWD specification and
direction of the Engineer - in -
charge.
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
b) 40 mm nominal bore
Vertical 5.00 Nos. ` 988.20 Each ` 4941.0
#VALUE!
Page 33
99 Providing and placing on terrace (at
all floor levels) polyethylene water
storage tank ISI : 12701 marked
with cover and suitable locking
arrangement and making necessary
holes for inlet, outlet and overflow
pipes but without fittings and the
base support fortank.
#VALUE!
101 Painting G.I. pipes and fittings with
synthetic enamel white paint with
two coats over a ready mixed
priming coat, both of approved
quality for new work
(a) 15 mm diameter pipe. 130.00 Metre ` 9.40 Metre ` 1222.0
#VALUE!
#VALUE!
#VALUE!
Page 34
(d) 40 mm diameter pipe. 80.00 Metre ` 21.20 Metre ` 1696.0
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
TOTAL ` 348149.0
Page 35
Assistant Engineer Executive Engineer
Project Unit, PWD(Buildings) Project Unit, PWD(Buildings)
Agartala, Tripura (W) Agartala, Tripura (W)
Page 36
Name of work:-Construction of Proposed OPD Building for DR.BRAM & TMC at Hapania,
Agartala, Tripura/SH:-Vertical extension of OPD Building from G+3 to G+4 level (Building
portion, water supply & sanitary etc) during the year 2016-17.
DETAILED CALCULATION
C SUB-HEAD : REINFORCED CEMENT CONCRETE WORK
1 Providing and laying in position ready mixed concrete manufactured in fully automatic
batching plant and transported to site of work in transit mixer for all leads, having
continuous agitated mixer, manufactured as per mix design of specified grade for reinforced
cement concrete work including pumping of RMC from transit mixer to site of aying but
excluding the cost of centring, shuttering, finishing and reinforcement, including admixtures
in recommended proportions as per IS 9103 to accelerate, retard setting of concrete,
improve workability without impairing strength and durability as per the direction of
Engineer-in-Charge. (Note :- Cement content considered in this item is @ 410 kg/cum.
Excess/ less cement used as per design mix is payable/recoverable separately).
All works upto Floor five level
Reinforced cement concrete grade M-25 using 410 kg of cement per cum
c1,
c2,c3,c
4
Column 1 x 16 x 0.500 x 0.400 x 3.300 = 10.56
Page 37
FB3 1 x 1 x 3.500 x 0.250 x 0.450 = 0.39
FB3 1 x 1 x 5.000 x 0.250 x 0.450 = 0.56
FB6 1 x 1 x 7.500 x 0.300 x 0.450 = 1.01
FB3 1 x 1 x 5.000 x 0.250 x 0.450 = 0.56
FB2 1 x 1 x 20.000 x 0.300 x 0.450 = 2.70
FB9 1 x 1 x 9.225 x 0.250 x 0.450 = 1.04
FB3 1 x 1 x 5.000 x 0.250 x 0.450 = 0.56
FB2 and 1 x 1 x 22.000 x 0.300 x 0.450 = 2.97
FB3 2 x 2 x 14.750 x 0.250 x 0.450 = 6.64
FB2a 1 x 1 x 5.000 x 0.300 x 0.450 = 0.68
FB2 1 x 2 x 14.750 x 0.300 x 0.450 = 3.98
FB2 1 x 3 x 37.000 x 0.300 x 0.450 = 14.99
FB1 1 x 1 x 37.000 x 0.300 x 0.450 = 5.00
0.450
FB1 1 x 1 x 5.000 x 0.300 x 0.450 = 0.68
FB9 1 x 1 x 9.075 x 0.250 x 0.450 = 1.02
FB21 1 x 1 x 1.675 x 0.300 x 0.450 = 0.23
FB2 1 x 1 x 14.075 x 0.300 x 0.450 = 1.90
FB21 1 x 1 x 1.675 x 0.300 x 0.450 = 0.23
FB1 1 x 1 x 5.000 x 0.300 x 0.450 = 0.68
FB10 1 x 1 x 9.075 x 0.250 x 0.450 = 1.02
FB1a and 1 x 1 x 30.500 x 0.300 x 0.450 = 4.12
FB10 1 x 1 x 9.075 x 0.250 x 0.450 = 1.02
FB1 1 x 1 x 30.500 x 0.300 x 0.450 = 4.12
FB2b,Fb11 1 x 1 x 70.075 x 0.300 x 0.450 = 9.46
FB2 1 x 1 x 30.500 x 0.300 x 0.450 = 4.12
FB4 1 x 1 x 9.075 x 0.300 x 0.450 = 1.23
FB2 1 x 1 x 30.500 x 0.300 x 0.450 = 4.12
FB1 and 1 x 1 x 70.075 x 0.300 x 0.450 = 9.46
FB2 1 x 1 x 10.000 x 0.300 x 0.450 = 1.35
FB2 1 x 1 x 15.000 x 0.300 x 0.450 = 2.03
FB1 and 1 x 1 x 70.075 x 0.300 x 0.450 = 9.46
FB2,fb13 1 x 3 x 70.075 x 0.300 x 0.450 = 28.38
FB1,fb6 a 1 x 1 x 24.125 x 0.300 x 0.450 = 3.26
FB1,fb6 a 1 x 1 x 24.125 x 0.300 x 0.450 = 3.26
FB12 1 x 1 x 10.000 x 0.300 x 0.550 = 1.65
Lintel
1 x 37.000 x 0.250 x 0.200 = 1.85
1 x 25.500 x 0.250 x 0.200 = 1.28
1 x 25.500 x 0.250 x 0.200 = 1.28
1 x 10.000 x 0.250 x 0.200 = 0.50
1 x 20.500 x 0.250 x 0.200 = 1.03
1 x 10.000 x 0.250 x 0.200 = 0.50
1 x 30.025 x 0.250 x 0.200 = 1.50
1 x 37.000 x 0.250 x 0.200 = 1.85
1 x 35.075 x 0.250 x 0.200 = 1.75
1 x 9.225 x 0.250 x 0.200 = 0.46
1 x 15.000 x 0.250 x 0.200 = 0.75
1 x 9.225 x 0.250 x 0.200 = 0.46
2 x 15.000 x 0.250 x 0.200 = 1.50
2 x 7.500 x 0.250 x 0.200 = 0.75
2 x 15.000 x 0.250 x 0.200 = 1.50
2 x 7.500 x 0.250 x 0.200 = 0.75
Page 38
toilet 23 x 6.400 x 0.125 x 0.150 = 2.76
toilet 6 x 5.200 x 0.125 x 0.150 = 0.59
toilet 3 x 5.050 x 0.125 x 0.150 = 0.28
Machine room
Column 1 x 4 x 0.500 x 0.500 x 5.200 = 5.20
Page 39
TOTAL = 32.49
3 Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position
and binding all complete above plinth level.
Thermo-Mechanically Treated bars of grade Fe-500D or more
1 x 657.485 x 140.00 = 92047.90
TOTAL = 92047.9
4 Providing and fixing sheet covering over expansion joints with iron screws as per design to
match the colour /shade of wall treatment.
Aluminium fluted strips 3.15mm thick : 200 mm wide
L.S = 950.00
TOTAL = 950.00
5 Centering shuttering including struttings, propping etc. and removal of form work for:
a Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc.
using shuttering ply
1 x 4 x 8.300 x 1.64 = 54.45
TOTAL = 54.45
b Suspended floors, roofs,landings, balconies and access platform with 12 mm thick shuttering
1 x 1 x 37.000 x 25.500 = 943.50
1 x 1 x 37.000 x 25.025 = 925.93
1 x 135 x 2.000 x 3.300 = 891.00
1 x 1 x 15.000 x 7.000 = 105.00
GRAND TOTAL = 2865.43
c LintelLintels, beams, plinth beams, girders, bressumers and cantilevers with shuttering ply
FB1 1 x 37.000 x ( 0.300 + 2 X 0.60 )= = 55.50
FB2a 1 x 5.000 x ( 0.300 x 2 X 0.60 )= = 7.50
FB2 2 x 37.000 x ( 0.300 x 2 X 0.60 )= = 111.00
FB2 2 x 14.750 x ( 0.300 x 2 X 0.60 )= = 44.25
FB1 and 1 x 14.750 x ( 0.300 x 2 X 0.60 )= = 22.13
FB1 and FB2 1 x 24.750 x ( 0.300 x 2 X 0.60 )= = 37.13
FB3 1 x 3.500 x ( 0.250 x 2 X 0.60 )= = 5.08
FB2a 1 x 5.000 x ( 0.300 x 2 X 0.60 )= = 7.50
fb22 1 x 4.475 x ( 0.250 x 2 X 0.50 )= = 5.59
FB1,FB2 and FB5 1 x 56.225 x ( 0.300 x 2 X 0.60 )= = 84.34
fb3 1 x 14.222 x ( 0.250 x 2 X 0.60 )= = 20.62
FB2 and FB6 1 x 17.250 x ( 0.300 x 2 X 0.60 )= = 25.88
FB2 1 x 5.000 x ( 0.300 x 2 X 0.60 )= = 7.50
FB3 1 x 3.500 x ( 0.250 x 2 X 0.60 )= = 5.08
FB3 1 x 5.000 x ( 0.250 x 2 X 0.60 )= = 7.25
FB6 1 x 7.500 x ( 0.300 x 2 X 0.60 )= = 11.25
FB3 1 x 5.000 x ( 0.250 x 2 X 0.60 )= = 7.25
FB2 1 x 20.000 x ( 0.300 x 2 X 0.60 )= = 30.00
FB9 1 x 9.225 x ( 0.250 x 2 X 0.50 )= = 11.53
FB3 1 x 5.000 x ( 0.250 x 2 X 0.60 )= = 7.25
FB2 and FB5 1 x 22.000 x ( 0.300 x 2 X 0.60 )= = 33.00
FB3 2 x 14.750 x ( 0.250 x 2 X 0.60 )= = 42.78
FB2a 1 x 5.000 x ( 0.300 x 2 X 0.60 )= = 7.50
FB2 2 x 14.750 x ( 0.300 x 2 X 0.60 )= = 44.25
FB2 3 x 37.000 x ( 0.300 x 2 X 0.60 )= = 166.50
FB1 1 x 37.000 x ( 0.300 x 2 X 0.60 )= = 55.50
Page 40
FB9 1 x 9.075 x ( 0.250 x 2 X 0.50 )= = 11.34
FB21 1 x 1.675 x ( 0.300 x 2 X 0.60 )= = 2.51
FB2 1 x 14.075 x ( 0.300 x 2 X 0.60 )= = 21.11
FB21 1 x 1.675 x ( 0.300 x 2 X 0.60 )= = 2.51
FB1 1 x 5.000 x ( 0.300 x 2 X 0.60 )= = 7.50
FB10 1 x 9.075 x ( 0.250 x 2 X 0.50 )= = 11.34
FB1a and FB1 1 x 30.500 x ( 0.300 x 2 X 0.60 )= = 45.75
FB10 1 x 9.075 x ( 0.250 x 2 X 0.50 )= = 11.34
FB1 1 x 30.500 x ( 0.300 x 2 X 0.60 )= = 45.75
FB2b,Fb11 and FB2 1 x 70.075 x ( 0.300 x 2 X 0.60 )= = 105.11
FB2 1 x 30.500 x ( 0.300 x 2 X 0.60 )= = 45.75
FB4 1 x 9.075 x ( 0.300 x 2 X 0.70 )= = 15.43
FB2 1 x 30.500 x ( 0.300 x 2 X 0.60 )= = 45.75
FB1 and FB2 1 x 70.075 x ( 0.300 x 2 X 0.60 )= = 105.11
FB2 1 x 10.000 x ( 0.300 x 2 X 0.60 )= = 15.00
FB2 1 x 15.000 x ( 0.300 x 2 X 0.60 )= = 22.50
FB1 and FB2 1 x 70.075 x ( 0.300 x 2 X 0.60 )= = 105.11
FB2,fb13 and FB14 3 x 70.075 x ( 0.300 x 2 X 0.60 )= = 315.34
FB1,fb6 and FB7 1 x 24.125 x ( 0.300 x 2 X 0.60 )= = 36.19
FB1,fb6 and FB8 1 x 24.125 x ( 0.300 x 2 X 0.60 )= = 36.19
FB12 1 x 10.000 x ( 0.300 x 2 X 0.70 )= = 17.00
GRAND TOTAL = 1894.29
d Columns, Pillars, Piers, Abutments, Posts and Struts with shuttering ply
C1,c2,c 89 x 2 x( 0.500 + 0.500 ) x 3.30 = 587.40
3,c4
C5,c6 16 x 2 x( 0.500 + 0.400 ) x 3.30 = 95.04
c7 9 x 2 x( 0.500 + 0.300 ) x 3.30 = 47.52
c8 7 x 2 x( 0.400 + 0.250 ) x 3.30 = 30.03
Total = 759.99
e Stairs (excluding landings) except spiral-staircases with wooden plank
f Vertical and horizontal fins individually or forming box louvers band, facias and eaves
g Edges of slabs and breaks in floors and walls under 20 cm. wide
Page 41
TOTAL = 28.39
h Weather shade, Chajjas, corbels etc., including edges.
W1 1 x 9 x 3.250 x 0.700 20.48
W2 1 x 2 x 2.625 x 0.700 3.68
W3 1 x 3 x 1.000 x 0.700 2.10
W4 1 x 10 x 2.250 x 0.700 15.75
W5 1 x 2 x 2.100 x 0.700 2.94
W6 1 x 5 x 2.075 x 0.700 7.26
W7 1 x 5 x 1.200 x 0.700 4.20
W8 1 x 9 x 0.600 x 0.700 3.78
W9 1 x 23 x 0.600 x 0.700 9.66
W10 1 x 2 x 1.625 x 0.700 2.28
W11 1 x 1 x 2.500 x 0.700 1.75
GRAND TOTAL = 73.87
D SUB-HEAD : BRICK WORK
6 First class brick work in superstructure above plinth level & upto floor-five level including cost
of all materials as required complete:-
In cement mortar 1:6 ( 1 cement : 6 fine sand ).
1 x 2 x 5.500 x 0.250 x 2.600 7.15
1 x 1 x 15.000 x 0.250 x 2.600 9.75
1 x 1 x 20.050 x 0.250 x 2.600 13.03
2 x 4 x 5.000 x 0.250 x 2.600 26.00
2 x 2 x 4.750 x 0.250 x 2.600 12.35
2 x 2 x 3.750 x 0.250 x 2.600 9.75
1 x 2 x 4.475 x 0.250 x 2.600 5.82
1 x 2 x 2.350 x 0.250 x 2.600 3.06
1 x 2 x 2.400 x 0.250 x 2.600 3.12
2 x 2 x 5.000 x 0.250 x 2.600 13.00
machine room
1 x 2 x 7.400 x 0.250 x 5.200 19.24
1 x 2 x 5.000 x 0.250 x 5.200 13.00
1 x 4 x 5.000 x 0.250 x 5.200 26.00
mumty room
1 x 2 x 7.400 x 0.250 x 3.300 12.21
1 x 2 x 5.000 x 0.250 x 3.300 8.25
deduct for window
W1 1 x 4 x 3.250 x 1.500 x 0.250 -4.88
W2 1 x 2 x 2.625 x 1.500 x 0.250 -1.97
W3 1 x 3 x 1.000 x 1.500 x 0.250 -1.13
W4 1 x 5 x 2.250 x 1.500 x 0.250 -4.22
W5 1 x 2 x 2.100 x 1.920 x 0.250 -2.02
W6 1 x 5 x 2.075 x 1.500 x 0.250 -3.89
W7 1 x 5 x 1.200 x 1.500 x 0.250 -2.25
W8 1 x 9 x 0.600 x 1.500 x 0.250 -2.03
W9 1 x 23 x 0.600 x 1.500 x 0.250 -5.18
W10 1 x 2 x 1.625 x 1.500 x 0.250 -1.22
W11 1 x 1 x 2.500 x 1.500 x 0.250 -0.94
GROUND TOTAL = 152.02
Page 42
7 Extra for brick masonry work in superstructure above floor-V level for each four floors or part
thereof by mechanical means by lifting material using mobile crane as required complete.
machine room
1 x 2 x 7.400 x 0.250 x 5.200 19.24
1 x 2 x 10.000 x 0.250 x 5.200 26.00
1 x 4 x 10.000 x 0.250 x 5.200 52.00
mumty room
1 x 2 x 7.400 x 0.250 x 3.300 12.21
1 x 2 x 5.000 x 0.250 x 3.300 8.25
TOTAL = 117.70
8 Half brick masonry work with first class bricks in superstructure upto floor five level including
cost of all materials as required complete:-
In cement mortar 1:4 ( 1 cement : 4 fine sand ).
10 Extra for providing & placing in position 2 nos 6mm dia MS bars at every 4th course of half
brick masonry work including anchorage in joints of 75mm in each side in superstructure for
all level including cost of all materials as required complete:-
In cement mortar 1:4 ( 1 cement : 4 fine sand ).
TOTAL = 700.86
F SUB-HEAD : WOOD WORK
11 Providing wood work in frames of doors, windows, clerestory windows and other frames,
wrought framed and fixed in position :
Local Teak wood
D1 2 x 3 x 2.100 x 0.125 x 0.100 = 0.16
D1 1 x 2 x 1.200 x 0.125 x 0.100 = 0.03
D3 2 x 2 x 2.400 x 0.125 x 0.100 = 0.12
D3 1 x 2 x 1.500 x 0.125 x 0.100 = 0.04
GRAND TOTAL = 0.35
Page 43
12 Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed
shutters for doors, windows and clerestory windows (Area of opening for panel inserts
excluding portion inside grooves or rebates to be measured). Panelling for paneled or paneled
and glazed shutters 25 to 40 mmthick.
Local Teak Wood 16 mm thick
1 x 2 x 2.200 x 1.200 = 5.28
GRAND TOTAL = 5.28
13 Providing and fixing 18 mm thick, 150 mm wide pelmet of coir veneer board ISI marked IS :
14842 - 2000, including top cover of 6 mm coir veneer board, nickel plated M.S. Pipe 20 mm
dia (heavy type) curtain rod with nickel plated brackets including fixing with 25 × 3 mm M.S.
flat 10 cm long and rawl plugs 50 mm long designation 10 no.) etc. all complete.
Page 44
18 Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not
less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with
nuts and screws etc. complete :
a) 300 x 16 mm
= 71
TOTAL = 71
b 250 x 16 mm
= 6
TOTAL = 6
19 Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than
grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with
necessary screws etc. complete :
a) 250 x 10 mm
TOTAL = 136.00
20 Providing and fixing aluminium handles ISI marked anodised (anodic coating not less than
grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with
necessary screws etc. complete :
a) 125 mm
TOTAL = 136.00
21 Providing and fixing aluminium hanging floor door stopper ISI marked anodised (anodic
coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour
and shade with necessary screws etc. complete.
= 70.00
TOTAL = 70.00
22 Providing and fixing aluminum U beading of required size to prelaminated /flush door shutter
including fixing etc. complete as per direction of Engineer-in-charge.
TOTAL = 150.00
23 Providing and fixing factory made door frame (single rebate) made of solid PVC foam profile
with homogenous fine cellular structure having smooth outer integral skin having 60mm
width & 30mm thickness and shall be fixed to wall as per instructions of Engineer-In-Charge
using 100x8 sheet metal CSK screws.
G. Floor
D2 2 x 23 x 2.100 = 96.60
D2 1 x 23 x 0.750 = 17.25
TOTAL = 113.85
24 Providing and fixing 28 mm thick door shutter made of solid PVC foam profile with
homogenous fine cellular structure having smooth outer integral skin having 71mm width &
28mm thick as vertical & horizontal styles. Joints are made using solvent adhesive and GI ‘C
sections (39mm x 19mm x 0.6mm thick) or M S pipe (40mm x 20mm ) stiffener rame insert
& telescopic polymeric ‘L’ corners .The panel shall be filled with 3mm thick high - pressure
compact laminate as per manufacturer’s specifications and directions f the Engineer-
incharge, cover moulding shall be provided for covering fixing screws and legant look.( for
W.C. bathroom door shutter).
D2 1 x 23 x 0.750 x 2.100 = 36.23
TOTAL = 36.23
25 Providing and fixing IS : 3564 marked Aluminium die cast body tubular type universal
hydraulic door closer with necessary accessories and screws etc.complete.
= 70.00
TOTAL = 70.00
G SUB-HEAD : STEEL WORK
Page 45
26 Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2mm
at 100 mm centre to centre and braced with flat iron diagonals 20x5mm size with top and
bottom rail of T-iron 40x40x6mm with 40mm dia. steel pulleys & with riveted bolts, nuts,
locking arrangement, stoppers, handles, hold fast /anchor bolt including embedding in
cement concrete of required grade for fixing in position, all necessary fittings, including
applying a priming coat of approved steel primer etc. complete as required.
STAIR
1 x 30 = 30.00
@ 5 Kg/rmt TOTAL = 150.00
29 Steel work welded in built up section/framed work including cutting, hoisting, fixing in
position and applying a priming coat of approved steel primer using steel etc. complete as
required:--
In stringers, treads, landing etc. of stair cases including use of chequered plate wherever requi
Page 46
W8 1 x 9 x 0.600 x 1.500 8.10
W9 1 x 23 x 0.600 x 1.500 20.70
W10 1 x 2 x 1.625 x 1.500 4.88
W11 1 x 1 x 2.500 x 1.500 3.75
Partition wall
1 x 1 x 9.750 x 3.000 29.25
1 x 1 x 4.750 x 3.000 14.25
1 x 1 x 30.075 x 3.000 90.23
1 x 1 x 14.575 x 3.000 43.73
1 x 5 x 10.500 x 3.000 157.50
1 x 1 x 9.525 x 3.000 28.58
1 x 1 x 20.500 x 3.000 61.50
1 x 5 x 5.000 x 3.000 75.00
1 x 2 x 5.000 x 3.000 30.00
1 x 4 x 4.750 x 3.000 57.00
2 x 2 x 3.750 x 3.000 45.00
1 x 4 x 4.750 x 3.000 57.00
1 x 2 x 5.000 x 3.000 30.00
1 x 3 x 5.000 x 3.000 45.00
GRAN = 924.08
@8.00Kg/Sqmt = 7392.61
b) For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and
making provision for fixing fittings wherever required including the cost of EPDM rubber /
neoprene gasket required ( Fittings shall be paid for separately ):-
Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868,
Minimum anodic coating of grade AC 15).
W1 1 x 3 x 3.250 x 1.500 14.63
W2 1 x 2 x 2.625 x 1.500 7.88
W3 1 x 3 x 1.000 x 1.500 4.50
W4 1 x 10 x 2.250 x 1.500 33.75
W5 1 x 2 x 2.100 x 1.920 8.06
W6 1 x 5 x 2.075 x 1.500 15.56
W7 1 x 5 x 1.200 x 1.500 9.00
W8 1 x 9 x 0.600 x 1.500 8.10
W9 1 x 23 x 0.600 x 1.500 20.70
W10 1 x 2 x 1.625 x 1.500 4.88
W11 1 x 1 x 2.500 x 1.500 3.75
Partition wall
1 x 1 x 9.750 x 3.000 29.25
1 x 1 x 4.750 x 3.000 14.25
1 x 1 x 30.075 x 3.000 90.23
1 x 1 x 14.575 x 3.000 43.73
1 x 5 x 10.500 x 3.000 157.50
1 x 1 x 9.525 x 3.000 28.58
1 x 1 x 20.500 x 3.000 61.50
1 x 5 x 5.000 x 3.000 75.00
1 x 2 x 5.000 x 3.000 30.00
1 x 4 x 4.750 x 3.000 57.00
2 x 2 x 3.750 x 3.000 45.00
1 x 4 x 4.750 x 3.000 57.00
Page 47
1 x 2 x 5.000 x 3.000 30.00
1 x 3 x 5.000 x 3.000 45.00
GRAN = 894.83
@4Kg D/ = 3579.31
TOTASq
mtr
32 Providing and fixing glazing of approved quality in aluminium doors, windows,
L. ventilator,
shutters and partition etc. with EPDM rubber / neoprene gasket etc. complete as per
architectural drawing and the direction of Engineer-in-charge (Cost of snap beading shall be
paid in basic item) :-
a) With float glass panes of 5.5 mm thickness ( weight not less than 13.50 kg / sqm )
1 X 924.077 GRAND TOTAL = 924.077
33 Providing and fixing 12 mm thick prelaminated three layer medium density (exterior grade )
particle board grade-I, type II conforming to IS : 12823 bonded with phenol ormaldehyde
synthetic resin, of approved brand and manufacture in panelling fixed in aluminium doors,
windows, shutters and partition frames with C.P. brass / stainless steel screws all complete
as per architectural drawing and the direction of Engineer-in-charge :-
Prelaminated
1 particle
x 1 board
x of approved
9.750 quality
x with decorative lamination on both side.29.25
3.000
1 x 1 x 4.750 x 3.000 14.25
1 x 1 x 30.075 x 3.000 90.23
1 x 1 x 14.575 x 3.000 43.73
1 x 5 x 10.500 x 3.000 157.50
1 x 1 x 9.525 x 3.000 28.58
1 x 1 x 20.500 x 3.000 61.50
1 x 5 x 5.000 x 3.000 75.00
1 x 2 x 5.000 x 3.000 30.00
1 x 4 x 4.750 x 3.000 57.00
2 x 2 x 3.750 x 3.000 45.00
1 x 4 x 4.750 x 3.000 57.00
1 x 2 x 5.000 x 3.000 30.00
1 x 3 x 5.000 x 3.000 45.00
TOTAL = 764.03
34 Providing and fixing stainless steel ( SS 304 grade ) adjustable friction window stay of
approved quality with necessary stainless steel screws etc. to the side hung windows etc.
complete as per direction of Engineer-incharge:-
a 205 x 19 mm TOTAL = 115.00
b 255 x 19 mm TOTAL = 92.00
35 Providing and fixing aluminium round shape handle of outer dia 100 mm with SS screws etc.
of approved quality complete as per direction of Engineer-in-charge:-
Anodised aluminium of grade AC 15.
TOTAL = 142.00
36 Filling the gap in between aluminium frame and adjacent RCC/brick work by providing
weather silicon sealant over backer rod of approved quality etc. complete as per architectural
drawing and direction of the Engineer-in charge:- (i) Upto 5 mm depth and 5 mm width.
TOTAL = 500.00
Page 48
37 Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium
Composite Panel Cladding, with open grooves for linear as well as curvilinear portions of the
building , for all heights and all levels etc. including:
(a) Structural analysis & design and preparation of shop drawings for pressure equalisation or
rain screen principle as required, proper drainage of water to make it watertight including
checking of all the structural and unctional design.
(b) Providing, fabricating and supplying and fixing panels ofaluminium composite panel
cladding in pan shape in metalic colour of approved shades made out of aluminium composite
panel material of approved thickness and specification. The aluminium composite panel
cladding sheet shall be coil coated, with Kynar 500 based PVDF / Lumiflon based
fluoropolymer resin coating of approved colour and shade on face # 1 and polymer (Service)
coating on face # 2 as specified using stainless steel screws, nuts, bolts, washers, cleats,
weather silicone sealant, backer rodsetc.
(c) The fastening brackets of Aluminium alloy 6005 T5 / MSwith Hot Dip Galvanised with
serrations and serratedwashers to arrest the wind load movement, fasteners, SS 316Pins and
anchor bolts of approved make in SS 316, Nylon separators to prevent bi-metallic contacts all
complete required to perform as per specification and drawing The item includes cost of all
material & labour component, the cost of all mock ups at site, cost of all samples of the
individual components for testing in an approved laboratory, field tests on the assembled
working curtain wall with aluminium composite panel cladding, cleaning and protection of the
curtain wall with aluminium composite panel cladding till the handing over of the building for
ccupation. Base frame work for ACP cladding is payable under the relevant aluminium item.s
The ontractor shall provide curtain wall with aluminium composite panel cladding, having all
the performance characteristics all complete , as per the Architectural drawings, as per item
description, as specified, as per the approved shop drawings and as directed by the Engineer-
in-Charge.However, for the purpose of payment, only the actual area on the external face of
the curtain wall with Aluminum Composite Panel Cladding (including width of groove) shall be
measured in sqm. up to two decimal places."
Aluminium Composite Panels of 4mm total thickness with Top coil – 0.50mm AA3003 / AA3105 / AA5005
Grade manufactured as per IS-737 1986, FR Grade Class B1 with 3mm Mineral Core with minimum 70-
72% Inorganic content (Aluminium Hydroxide and Magnesium Hydroxide) 28-30% Organic content (LDPE)
conforming to ASTM E-119- 16,18 and EN 13501-1, class B1,and Bottom coil – 0.50mm AA3003 /
AA3105 / AA5005 Grade, manufactured as per IS- 737 1986 with minimum 25 microns lead free PVDF
Coating onforming to AAMA2605 on top coil and Service
coating on Back Coil (4 - 6 microns) having minimum panel
weight of 7.5 Kg/m2
1 x 1 x 95.000 x 3.300 313.50
TOTAL = 313.50
Page 49
38 Design supply & installation of suspended Spider Glazing system designed to withstand the
wind pressure as per IS 875 (Part-III). The Suspended System held with Spider Fittings of
SS-316 Grade Steel of approved manufacturer with glass panel having 12 mm thick clear
toughened glass held together with SS- 316 Grade Stainless steel Spider & bolt assembly
with laminated glass fins 21 mm thick. The Glass fins and glass panel assembly shall be
connected to Slab/ beams by means of SS- 316 Grade stainless steel brackets & Anchor bolts
and at the bottom using SS channel of 50x25x2mm using fastener & anchor bolts, non
staining weather sealants of approved make, Teflon/ nylon bushes and separators to prevent
bimetallic contacts, all complete to perform as per specification and approved drawings. The
complete system to be designed to accommodate thermal expansion & seismic movements
etc. The joints between glass panels (6 to 8 mm) and gaps at the perimeter & in U channel of
the assembly to be filled with non staining weather sealant, so as to make the entire system
fully water proof & dust proof.
The rate shall include all design, Engineering and shop drawing including approval from
structural designer, labour, T&P, scaffolding, other incidental charges including wastage,
enabling temporary services all fitting fixers nut bolts, washer, Buffer plates, fastener,
anchors, SS channel laminated glass etc. all complete. For the purpose of payment, actual
elevation area of Glazing including thickness of joints and the portion of Glass panel inside
the SS channel shall be measured.
Page 50
2 x 4.950 x
2.500 = 24.75
1 x 2.100 x
2.500 = 5.25
Kota stone slab 25 mm thick GRAND TOTAL = 30.00
42 Kota stone slabs 25 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm
(average) thick cement mortar 1 : 3 ( 1 cement : 3 fine sand ) and joined with ordinary
cement slurry mixed with pigment to match the shade of slabs, including rubbing and
polishing complete.
23 x 2.500 x 1.500 = 86.25
TOTA = 86.25
43 Providing and fixing Marble stone in floors over 20 mm thick bed of cement mortar 1 : 4 ( 1
cement : 4 fine sand ) jointed with ordinary cement slurry including pointing with white
cement mixed with of matching shade, including rubbing and polishing complete.
Page 51
47 Providing and fixing precast chequered cement concrete tiles 18 mm thick, laid in footpath &
courtyard, on 20 mm thick bed of cement mortar 1 : 4 ( 1 cement : 4 finesand ) jointed with
neat cement slurry including rubbing and cleaning complete as per direction of the Engineer-
in- Charge.
= TOTAL= 100.00
J SUB-HEAD : ROOFING AND CELLING
48 Providing corrugated G.S. sheet roofing including vertical/curved surface fixed with polymer
coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet ashers or
with G.I. limpet washers filled with white lead and ncluding a coat of approved steel primer
and two coats of approved paint on overlapping of sheets complete (up to any pitch in
horizontal/ vertical or curved surfaces) excluding the cost of purlins, rafters and trusses and
including cutting to size and shape wherever required.
0.63mm thick with zinc coating not less than 275gm/m2
1 x 2 x 15.000 x 3.750 = 112.50
1 x 2 x 15.000 x 3.750 = 112.50
TOTAL 225.00
49 Providing ridges or hips of width 60 cm overall width plain G.S. sheet fixed with polymer
coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete.
0.63mm thick with zinc coating not less than 275gm/m2
1 x 2 x 15.000 = 30.00
1 x 2 x 15.000 = 30.00
TOTAL 60.00
50 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes (working pressure 4
kg/cm2) conforming to IS : 13592 Type A including jointing with seal ring conforming to IS :
5382 leaving 10 mm gap for thermal expansion:
Single socketed pipe - 110 mm OD
110 mm OD
TOTAL 500.00
51 Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for
unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type-A including jointing
with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion:
Coupler
a 110mm 1 x 816 TOTAL 816.00
Single equal tee with door
b 110 x 110 x 110 mm 1 x 816 TOTAL 816.00
Single equal tee without door
c 110 x 110 x 110 mm 1 x 816 TOTAL 816.00
Bend 87.5 degree
d 110mm 1 x 816 TOTAL 816.00
Plain shoe
e 110mm 1 x 816 TOTAL 816.00
52 Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC
rain water pipes by means of 50x50x50mm hard wood plugs, screwed with M.S. screws of
required length including cutting brick work and fixing with cement mortar 1 : 4 (1cement : 4
fine sand) making good the wall etc. complete.
110mm 1 x 60 TOTAL 60.00
53 Providing and fixing to the inlet mouth of rain water pipe PTMT grating with thickness of 8mm
and weighing not less than 100gm. complete.
100mm 1 x 14 TOTAL 14.00
Page 52
54 Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc.,
including cutting, hoisting, fixing in position and applying a priming coat of approved steel
primer, including welding and bolted with special shaped washers etc. complete.
Page 53
61 Applying priming coat [Payment shall be made after submission of Test Certificate issued by
the Manufacturer] :
a) With ready mixed Pink or Grey primer of approved brand and manufacture on wood work ( har
Qty. vide 1 x 75.60 x 2.25 Co-offi TOTAL = 170.10
b) With ready mixed red oxide zinc chromate primer of approved brand and manufacture on
steel galvanised iron/ steel works
LS TOTAL = 75.25
62 Painting on rain water, soil, waste and vent pipes and fittings with synthetic enamel paint
( two or more coats ) of required colour of approved brand and manufacture to give an even
shade on new work over and including a priming coat of approved steel primer complete.
100 mm dia
1 x 5.000 x 3.50 = 17.50
1 x 15.000 x 3.50 = 52.50
1 x 2.000 x 156.00 = 312.00
TOTAL = 382.00
63 Painting with synthetic enamel paint of approved brand and manufacture to give an even
shade [Payment shall be made after submission of Test Certificate issued by the
Manufacturer]:
Two or more coats on new work
TOTAL= 150.00
L SUB-HEAD:WATER PROOFING WORK
64 Grading roof for water proofing treatment complete as required as per direction of the
Engineer-in-charge with :
a) Cement concrete 1:2:4 (1 cement : 2 fine sand : 4 graded stone aggregate 20 mm nominal
size)
1 x 37.000 x 25.500 = 943.50
1 x 37.000 x 25.025 = 925.93
1 x 47.000 x 20.050 = 942.35
1 x 19.225 x 15.000 = 288.38
1 x 14.475 x 3.675 = 53.20
1 x 10.000 x 10.000 = 100.00
3253.35
1 x 3253.346 x 0.040 = 130.13
TOTAL 130.13
b) Cement mortar 1:4 (1 cement : 4 fine san
1 x 3253.346 x 0.015 = 48.80
TOTAL 48.80
L SUB-HEAD:SUB-HEAD : DISMANTLING AND DEMOLISHING WORK
65 Demolishing reinforced cement concrete manually /by mechanical means including stacking
of steel bars properly and disposal of unserviceable material with all lifts and upto 50 m lead
etc. complete as per direction of the Engineer- in-charge.
1 x 135 x 0.500 x 0.500 x 1.000 = 33.75
1 x 16 x 0.500 x 0.400 x 1.000 = 3.20
1 x 9 x 0.500 x 0.300 x 1.000 = 1.35
1 x 7 x 0.400 x 0.250 x 1.000 = 0.70
TOTAL 39.00
Page 54
66 Demolishing cement concrete manually / by mechanical means including disposal of material
with all lifts and upto 50 m lead etc. complete as per direction of the Engineer- in-charge:-
Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)
1 x 7 x 40.000 x 3.000 x 0.100 = 84.00
TOTAL 84.00
67 Demolishing brick work including stacking of serviceable materials and disposal of
unserviceable materials with all lifts and upto a lead of 50m etc. complete as per direction of
the Engineer- in-charge:-
1 x 7 x 2.200 x 0.250 x 1.000 = 3.85
TOTAL 3.85
68 Dismantling steel work in built up section in channels, angles, tees, flats including all gusset
plates, bolts, nuts, cutting rivets, welding including dismembering and stacking of serviceable
materials and unserviceable materials separately with all lifts and upto a lead of 50 m etc.
complete as per direction of the Engineer- in-charge.
= LS 2000.00
TOTAL 2000.00
M SUB-HEAD : SANITARY INSTALLATIONS
69 Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100mm sand
cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern with manually controlled
device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete including
cutting and making good the walls and floors wherever required :
White Vitreous china Orrisa pattern W.C. pan of size 580x440 mm with integral type foot rests
1 x 5 = 5.00
TOTAL = 5.00
70 Providing and fixing white vitreous china pedestal type water closet (European type W.C.
pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern with manually controlled
device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete
including cutting and making good the walls and floors wherever required :
W.C. pan with ISI marked white solid plastic seat and lid
1 x 22 TOTAL = 22.00
TOTAL = 22.00
71 Providing and fixing white vitreous china wash basin including making all connections but
excluding the costof fittings:
Flat back wash basin of size 550x400mm
1 x 15 = 15.00
TOTAL = 15.00
72 Providing and fixing Stainless Steel AISI 304 (18/8) kitchen sink as per IS 13983 with C.I.
brackets and stainless steel plug 40 mm including painting of fittingsand brackets, cutting
and making good the walls wherever required:
1 x 6 TOTAL = 6
74 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin
of 430x260x350mm and 340x410x265mm izesrespectively.
1 x 2.000 TOTAL = 2.00
Page 55
75 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings
complete.
a Semi rigid pipe
32 mm dia
1 x 25 = 25.00
1 x 5 = 5.00
TOTAL = 30.00
b Flexible pipe
32 mm dia
1 x 25 = 25.00
1 x 5 = 5.00
TOTAL = 30.00
76 Providing and fixing 600x450 mm bevelled edge mirror of superior glass (of approved
quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass
screws and washers complete.
1 x 25 = 25.00
1 x 5 = 5.00
TOTAL = 30.00
77 Providing and fixing 600x120x5mm glass shelf with edges round of supported on anodised
aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm
long screws, rawl plugs etc., complete.
G. Floor 1 x 20 = 20.00
TOTAL = 20.00
78 Providing and fixing PTMT liquid soap container 109mm wide, 125mm high and 112mm
distance from wall of standard shape with bracket of the same materials with snap fittings of
approved quality and colours weighing not less than 105 gms.
1 x 25 = 25.00
TOTAL = 25.00
79 Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP
brass screws with concealed fitting arrangement of approved qualityand colour.
450mm long towel rail with total length of 495mm, 78mm wide and effective height of
88mm, weighing not less than170gms.
G. Floor 1 x 40 = 40.00
TOTAL = 40.00
80 Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height
of 75mm with concealed fitting arrangements weighing not less than 106 gms.
G. Floor 1 x 40 = 40.00
TOTAL = 40.00
Page 56
For 100 mm dia. Pipe
1 x 30 = 30.00
1 x 52 = 52.00
TOTAL = 82.00
83 Providing and fixing heel rest sanitary bend
100
mm dia
Sand cast iron S&S as per IS - 3989
1 x 12 = 12.00
TOTAL = 12.00
84 Providing and fixing single equal plain junction of
required degree
100x100x100 mm
Sand cast iron S&S as per IS - 1729
1 x 8 = 8.00
1 x 4 = 4.00
TOTAL = 12.00
85 Providing and fixing single equal plain junction of required degree with access door, insertion
rubber washer 3 mm thick, bolts and nuts complete.
100x100x100 mm
Sand cast iron S&S as per IS - 1729
1 x 8 = 8.00
1 x 4 = 4.00
TOTAL = 12.00
86 Providing and fixing double equal plain junction of required degree.
100x100x100x100 mm
Sand cast iron S&S as per IS - 1729
1 x 8 = 8.00
1 x 4 = 4.00
TOTAL = 12.00
87 Providing and fixing collar:
100 mm
Sand cast iron S&S as per IS - 1729
1 x 8 = 8.00
1 x 4 = 4.00
TOTAL = 12.00
88 Providing and fixing sand cast iron S&S offsets as per IS: 1729
152 mm offsets
With 100 mm dia. Pipe
G. Floor 1 x 4 = 4.00
F.Floor 1 x 2 = 2.00
TOTAL = 6.00
89 Providing and fixing terminal guard:
100
mm
Sand cast iron S&S as per IS - 1729
1 x 12 = 12.00
TOTAL = 12.00
90 Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron pipes and fittings
ofdiameter:
Page 57
100mm 1 x 2 x 10 = 20.00
TOTAL = 20.00
91 Providing and fixing trap of self cleansing design with screwed down or hinged grating with or
without vent arm complete, including cost of cutting and making good the walls and floors:
100 mm dia.
1 x 25 = 25.00
1 x 8 = 8.00
TOTAL = 33.00
N SUB-HEAD : WATER SUPPLY
93 Providing and fixing G.I. pipes of medium class as per IS : 1239 with latest amendment
complete with G.I. fittings and clamps, including cutting and making good the walls etc.
omplete as per CPWD specification and direction of the Engineer - in - charge.
Internal work - Exposed on wall.
a 15 mm dia. nominal bore
1 x 130 = 130.00
TOTAL = 130.00
b 20 mm dia. nominal bore
1 x 120 = 120.00
TOTAL = 120.00
c 25 mm dia. nominal bore
1 x 90 = 90.00
TOTAL = 90.00
d 40 mm dia. nominal bore
1 x 80 = 80.00
TOTAL = 80.00
94 Making connection of G.I. distribution branch with G.I. main following sizes by providing and
fixing tee, including cutting and threading the pipe etc. complete as per CPWD specification
and direction of the Engineer - in - charge.
25 to 40 mm nominal bore
1 x 50 = 50.00
TOTAL = 50.00
95 Providing and fixing brass bib cock of approved
quality :
15 mm nominal bore
1 x 35 = 35.00
TOTAL = 35.00
96 Providing and fixing brass stop cock of approved
quality
15 mm : dia nominal bore
1 x 35 = 35.00
Page 58
TOTAL = 35.00
97 Providing and fixing gun metal gate valve with C.I.
wheel of approved quality (screwed end):
25 mm nominal bore
1 x 12 = 12.00
40 mm nominal bore
1 x 5 TOTAL = 5.00
99 Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI :
12701 marked with cover and suitable locking arrangement and making necessary holes for
inlet, outlet and overflow pipes but without fittings and the base support fortank.
1 x 5 x 2000 Lit TOTAL = 10000.00
100 Constructing masonry Chamber 30x30x50 cm, inside , in brick work in cement mortar 1:4 (1
cement :4 fine sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with
hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement :2 coarse sand : 4 graded
stone aggregate 20 mm nominal size ) necessary excavation foundationconcrete 1:5:10 ( 1
cement :5 fine sand:10 graded stone aggregate 40mm nominal size ) and inside plastering
with cement mortar 1:3 (1 cement :3 coarse sand) 12mm thick finished with a floating coat
of neat cement complete as per standard design :
101 Painting G.I. pipes and fittings with synthetic enamel white paint with two coats over a ready
mixed priming coat, both of approved quality for new work
15 mm diameter pipe.
1 x 130.00 = 130.00
TOTAL = 130.00
20 mm diameter pipe.
1 x 120.00 = 120.00
TOTAL = 120.00
25 mm diameter pipe.
1 x 90.00 = 90.00
TOTAL = 90.00
40 mm diameter pipe.
1 x 80.00 = 80.00
TOTAL = 80.00
102 Painting G.I. pipes and fittings with two coats of anticorrosive bitumastic paint of approved
quality :
15 mm 1 x 35.000 TOTAL = 35.00
diameter pipe
20 mm 1 x 30.000 TOTAL = 30.00
diameter pipe
Page 59
103 Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and
making long screws including excavation, refilling the earth or cutting of wall and making
good the same complete wherever required
20 mm nominal 1 x 22 TOTAL = 22.00
bore.
25 mm nominal 1 x 16 TOTAL = 16.00
bore.
40 mm nominal 1 x 15 TOTAL = 15.00
bore.
104 Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet:
100 1 x 25 TOTAL = 25.00
mm
diamete
r
Executive Engineer
Assistant Engineer Project Unit, PWD(Buildings)
Project Unit, PWD(Buildings) Agartala, Tripura (W)
Agartala, Tripura (W)
Page 60
Division estimate
item no 1.2
3.21 my estimate this is correct
3.3 my estimate this is correct