Professional Documents
Culture Documents
D5N LGP
D5N LGP
D5N LGP
Track-Type Tractor
✔ New feature
2
Operator’s Station Styling Structure
✔ State of the art operator’s station has ✔ Modern styling with rounded corners ✔ Cast iron and heavy steel plates are
reduced sound levels, lower cab and tapered engine enclosures provide welded to insure a rigid one piece case
vibrations and good visibility. The excellent visibility. Robust sheet metal and frame structure. Bolted soft
(optional) Caterpillar comfort series air exterior and heavy steel access door mounted cab supports reduce sound
suspension seat helps to reduce operator panels and guards are easily accessible levels and vibration. Fuel and oil tank
fatigue. Cab and air conditioning are and durable. pg. 10 rubber isolation mounts eliminate
now standard. pg. 8 vibration and reduce stress. pg. 11
3
Power Train
3126B HEUI™ meets EU Stage II emission regulations and offers excellent
performance levels. Finger Tip Control provides smooth steering control.
Auto-shift and Auto-kickdown deliver maximum machine productivity.
kW
{ Working
Range }
97
94
89 88 kW
86 86 kW
82
1500 1600 1700 1800 1900 2000 2100
Engine rpm
Cat 3126B HEUI Engine. Caterpillar Torque Rise. The direct injected 3126B Engine Features. 3126B major
electronic engines meet worldwide electronic fuel system provides a features include:
emission requirements for the EU controlled fuel delivery increase as ■ Increased power to 86 kW (115 hp)
Stage II regulations. With the HEUI the engine lugs back from rated speed. for increased performance.
Fuel system, injection pressure is This results in increased horsepower ■ Large displacement electronic engine
independent of engine speed and above rated power. A combination of with lower emissions and good cold
provides maximum fuel delivery increased torque rise and maximum start capability.
efficiency with low emissions. horsepower improves response, ■ Power train to engine link with
The Cat 3126B engines are equipped provides greater drawbar pull and faster electronic controlled throttle shifting.
with an electronic air inlet heater. dozing cycles. The 89 kW (119 hp) ■ New Poly Vee serpentine engine fan
This warms the air in the air inlet maximum flywheel power occurs at belt with auto tension feature
manifold for easier starting and reduces 1800 rpm when power is needed during eliminates the traditional three to four
white smoke on cold starts. Machines the dozing work cycle. belt system.
will automatically activate the timed air ■ Rated flywheel power 86 kW ■ Extended oil and engine filter change
inlet heater prior to engine startup. (115 hp). intervals up to 500 hours after break-
■ Maximum flywheel power 89 kW in.
Turbocharged and Aftercooled.
(119 hp). ■ ATAAC cooling system.
A wellmatched turbocharger and ■ Multiple Row Modular (IMRM)
air-to-air aftercooler results in higher
Radiator is less subject to plugging
power while keeping rpm steady and
due to a unique radiator fin design
exhaust temperatures low.
which provides excellent heat transfer
capability.
4
Drive Train
Rugged, durable and reliable components deliver smooth, responsive power
and lasting reliability.
Torque Converter.The D5N single stage Transmission. The proven planetary Steering Clutch and Brakes. Oil cooled,
torque converter efficiently responds to powershift transmission features three hydraulically actuated, large diameter
changing load conditions by providing speeds forward and three speeds reverse plates and clutch discs provide higher
torque multiplication, therefore and utilizes large diameter, high capacity, torque capacity and increased service
increasing drawbar power. It also oil cooled clutches. To maximize the life.
provides protection to the drive train life of the transmission, the planetary
Elevated Final Drive. Final drives are
components by preventing shock loads design distributes loads and stresses
isolated from ground and work tool
from heavy dozing applications. This over multiple gears.
induced impact loads for extended
torque converter is efficiently matched ■ Controlled throttle shifting regulates
power train life.
to the power train components and engine speed during high-energy
provides the superior performance you directional shifts for smoother Electronic Steering and Transmission
need. operation and longer component life. Controls. The D5N provides Finger Tip
■ The transmission and bevel gear set Control steering. This system delivers
Auto-Shift/Auto-Kickdown. Auto-shift
are modular by design, and easily the control operators need for all
allows the operator to pre-select a
slide into the machine’s rear case, applications. Soft touch buttons located
forward and reverse gear for easy,
even with the ripper installed. on the steering controls shift the
efficient directional changes. Auto-shift ■ Forced oil flow lubricates and cools electronically controlled transmission.
settings include:
clutch packs to provide maximum
■ First forward to second reverse. Electronic Clutch Pressure Control.
■ Second forward to second reverse.
clutch life.
The D5N has an additional transmission
■ Second forward to first reverse. shifting feature for added performance
and operator comfort – the Electronic
Auto-kickdown allows the transmission
Clutch Pressure Control (ECPC). This
to automatically downshift when
unique feature provides smoother
significant load increases are detected.
shifting by regulating and modulating
the individual clutches based on current
operating conditions.
5
Finger Tip Control
Finger Tip Control (FTC) combines steering, machine direction and gear selection into
a single control system, which can be operated with one hand for enhanced operator comfort
and increased productivity.
6
2
1
3
6
8
5 7
4
1 Operator’s Station. State of the art 4 Final Drive. Caterpillar elevated final 7 Radiator. Improved Multiple Row
operator’s station has reduced sound drives provide isolation from ground Modular (IMRM) radiator is less
levels, lower cab vibration, and or work tool impact loads, extending subject to plugging and provides
increased glass area. service life. excellent heat transfer.
2 Steering Control. Finger Tip Control 5 Clutch/Brake Assembly. Oil cooled 8 Torque Converter. Efficient torque
(FTC) steering system provide large diameter clutch and brake disc converter provides torque
simultaneous one-handed steering provide long service life. multiplication for increased drawbar
and transmission control. pull and protects the drive train from
6 Engine. Caterpillar 3126B HEUI
shock loads.
3 Powershift Transmission. Proven engine meets EU Stage II emission
planetary design provides fast smooth regulations.
speed changes while distributing
loads over multiple gears for long
life.
7
Operator Station
State of the art operator’s station has reduced sound levels, lower cab vibrations and
excellent visibility. The (optional) Caterpillar comfort series air suspension seat
helps reduce operator fatigue. Cab and air conditioning are now offered as standard.
Cab. The cab incorporates large glass window and door panels. The cooling system is now incorporated into the cab structure
This allows for excellent visibility to the blade, rear and sides providing good visibility to the rear of the machine. Individual
of the machine. New door and window seal design allows for windshield wiper controls are located in the front section of
a fully pressurized dust free cab. Low acoustic headliner the headliner. The new design is spacious and comfortable to
material, and sound suppression foam panels reduce sound promote shift-long productivity.
levels to below 75 dB(A) when measured per ISO 6394:1998.
8
Ergonomic Work Tool Controls.
Ergonomically shaped blade and ripper
controls have improved lever efforts for
reduced operator fatigue. The voltage
converter provides two 12 volt power
supplies.
Electronic Monitoring System (EMS-III).
Cat C500 Comfort Suspension Seat. Dash. The instrument panel, with easy EMS III provides the operator instant
Caterpillar C500 Comfort Series Air to read analog gauges and warning feedback on machine conditions and
Suspended Seat is ergonomically lamps, keeps the operator aware of any records performance data to help
designed to support the operator in all potential problems. All gauges and diagnose problems. It has flashable
site conditions (optional). readouts are easily visible in direct memory allowing system upgrades, as
• Seat is fully adjustable for maximum sunlight. HVAC controls and vents are new technology and electronics become
operator comfort, support and conveniently located on the dash to available. This system is compatible
reduced operator fatigue. provide climate control for the operator. with Cat ET and CMS service tools.
• Seat cushion reduces pressure on the Auto-shift and Auto-kickdown controls EMS includes the following gauges
lower back and thighs while allowing are located within easy reach of the and readouts:
unrestricted arm and leg movement. operator. New footpads keep the ■ Fuel level gauge.
• A standard lumbar adjustment operator stable and comfortable during ■ Hydraulic oil temperature gauge.
improves lower back comfort. side slope applications. ■ Engine coolant temperature gauge.
9
Styling
Modern styling with rounded shapes and tapered hood enhances operator visibility.
The N-Series combines eye-catching styling with solid, reliable performance.
Styling. New styling with rounded Accessibility and Serviceability. Quality and Reliability.
machine shapes offers excellent ■ Hinged engine doors to increase ■ Doubled 4 mm sheet metal on the
visibility, accessibility and engine and service access. side service access panels and rear
serviceability. ■ Remote-mounted filters located guard.
■ Durable, heavy steel door panel within easy reach during PM service. ■ Stamped, rounded sheet metal corners
■ Large amount of glass area in cab. ■ Fast fuel tank provision added is now standard.
■ Controls are ergonomic for easier (attachment). ■ Heavy duty rear guard for ripper.
operation and better efficiency. ■ Larger service panel doors. ■ Clipped seals provide protection from
■ Diagnostic test ports added for quick dust and moisture for:
troubleshooting. – rear enclosure
– door openings
– between ROPS post and rear
enclosure
10
Structure
Engineered and built to give solid support in the most demanding applications.
Designed to last throughout the extended service life of the D5N.
11
Undercarriage
The Caterpillar elevated sprocket undercarriage arrangements are designed for optimized
balance and best possible performance in fine grading to heavy dozing applications.
■ Final drives are raised above the work and a wider gauge increase track
area where moisture and abrasive contact area and reduce ground
conditions can cause premature pressure for excellent flotation.
damage and failures.
■ Isolates them from ground-induced
impact loads.
12
Serviceability
Modular design moves Caterpillar a generation ahead in simplifying repair and
maintenance.
13
Work Tools
Cat D5N work tools are designed to provide strength and flexibility to match the machine
to the job.
14
Total Customer Support
Your Cat dealer offers a wide range of services that can be set up with a customer support
agreement. The dealer can customize a plan for you from PM service to total machine
maintenance, allowing you to optimize your return on investment.
Product Support. Your Cat Dealer
offers a wide range of services that can
be set up under a customer support
agreement when you purchase your
equipment. The dealer will help you
choose a plan that can cover everything
from the machine and attachment
selection to replacement. This will help
you get the best return on your
investment.
Remanufactured Components. Save
money with remanufactured parts. You
receive the same warranty and
reliability as new products at a cost
savings of 40 to 70 percent.
Service Capability. Whether in the
dealer’s fully equipped shop or in the
field, you will get trained service
technicians using the latest technology
and tools.
Selection. Make detailed comparisons
of the machines you are considering
before you buy. How long do
components last? What is the cost of
preventive maintenance? What is the
true cost of lost production? Your Cat
Dealer can give you answers to these
questions. Operation. Improving operating Maintenance. More and more
techniques can boost your profits. Your equipment buyers are planning for
Purchase. Consider the financing
Cat Dealer has training videotapes, effective maintenance before buying
options available as well as day-to-day
literature and other ideas to help you equipment. Choose from your dealer’s
operating costs. This is also the time to
increase productivity. wide range of maintenance services at
look at dealer services that can be
the time of your purchase. Repair
included in the cost of the machine to Replacement. Repair, rebuild or
option programs guarantee the cost of
yield lower equipment owning and replace? Your Cat Dealer can help
repairs up front. Diagnostic programs
operating costs over the long run. evaluate the cost involved so you can
such as Scheduled Oil Sampling and
make the right choice.
Technical Analysis help avoid
unscheduled repairs.
15
3126B Engine Transmission Service Refill Capacities
Gross Power 88 kW/119 hp Forward km/h Liters
Net Power 1 3.1 Fuel Tank 257
ISO 9249 86 kW/115 hp 2 5.4 Cooling System 48
EU 80/1269 86 kW/115 hp 3 9.1 Final Drives (each) 6
Bore 110 mm Reverse Hydraulic Tank 29.5
Stroke 127 mm 1 3.8
Displacement 7.2 Liters 2 6.7
■ Engine Ratings at 2100 rpm 3 11.3
■ The engine is certified according to
the EU Directive 97/68/EC, Stage II
■ Net power advertised is the power
available at the flywheel when the Blades Brakes
engine is equipped with fan, air
cleaner, muffler and alternator.
■ No derating required up to 4600 m Blade type VPAT ■ Brakes meet the standard
altitude, beyond 4600 m automatic Blade capacity and Blade width ISO 10265 MARCH99.
derating occurs. see Ripper Specifications on pg. 18.
3 7
9 4
1 5 8
2 6
XL LGP
ROPS/FOPS mm mm
1 Track gauge 1770 2000
■ ROPS (Rollover Protective Structure) 2 Width of tractor
offered by Caterpillar for the machine With the following attachments:
meets ROPS criteria ISO 3471-1994. Standard shoes without blade 2330 2760
■ FOPS (Falling Object Protective
Standard shoes with VPAT blade angled 25° 2797 3043
Structure) meets ISO 3449-1992
Level II. 3 Machine height from tip of grouser:
With the following equipment:
ROPS canopy 2992 3036
ROPS cab 2995 3039
4 Drawbar height (center of clevis)
Sound From ground face of shoes 486 537
5 Length of track on ground 2388 2604
■ The operator sound level measured 6 Length of basic tractor (with drawbar) 3544 3720
according to the procedures specified
With the following attachments, add to basic tractor length:
in ISO 6394:1998 is 75 dB(A),
for cab offered by Caterpillar, Ripper 818 818
when properly installed and PA55 winch 381 381
maintained and tested with VPAT blades, straight 1011 1344
the doors and windows closed. VPAT blade, angled 25° 1542 1779
■ Hearing protection may be needed 7 Height over stack from tip of grouser 2805 2849
when operating with an open operator
8 Height of grouser 47 47
station and cab (when not properly
maintained or doors/windows open) 9 Ground clearance from ground face of shoe 378 422
for extended periods or in noisy (per SAE J1234)
environment.
■ The labeled sound power level is
108 dB(A) measured according to
the test procedures and conditions
specified in 2000/14/EC.
Ripper Specifications
XL LGP
Beam width mm 1951 1951
Cross section mm 165 x 211 165 x 211
Ground clearance under beam (raised) mm 895 949
Under tip at full raise mm 482 536
Number of pockets (teeth) 3 3
Maximum penetration mm 350 298
Maximum pryout force kN 191 193
Maximum penetration force (VPAT blade equipped power shift) kN 40 47
Weight:
With three teeth kg 758 758
Each tooth kg 34 34
kg kg
Air conditioner less off -51.4 Seat, with adjustable armrest:
Alternator, brushless 0.34 Air suspended C500 comfort series, cloth
Bulldozers - see Bulldozer Specifications below (for cab only) 52.4
Canopy -155 C500 comfort series, cloth, mechanical suspended
Heater, dash mounted for OROPS 18.5 (for cab only) 53.6
High Ambient Temp 3 C500 comfort series, vinyl, mechanical suspended 53.6
Fan, reversible 7 Low back, vinyl 48.7
Fast fill fuel tank 7 Starting aids:
Lighting system, 4 lights 18.2 Engine coolant heater (dealer installed) 1
Product link 4 Heavy duty batteries 0
Protective MSS 2.5 Priming pump 0
Rotating beacon 3.3 Track, pair, heavy duty sealed and lubricated:
Sound suppression (for cab) 18 XL arrangement, 41-section:
Guards: 510 mm (20") MS/HD -170
Crankcase, heavy duty 63 510 mm (20") MS/RBT -116
Fuel tank (for cab or canopy) 69 510 mm (20") ES/HD 80
Guard, rear, heavy duty 5 560 mm (22") MS/RBT -20
Guiding Track XL/MS 119 560 mm (22") ES/HD 200
Guiding Track LGP/MS 70 LGP arrangement, 44-section:
Guiding Guarding Track XL/HD 192 610 mm (24") MS/HD -220
Guiding Guarding Track LGP/HD 155 610 mm (24") MS/RBT -250
Radiator, heavy duty, hinged grill 29 760 mm (30") MS/RBT 0
Sand blast grid 14.8 762 mm (30")
self cleaning/HD 348
Screens and Sweeps:
Winch and fairleads:
Rear screen for EROPS cab 81
Winch, standard speed 1179
Rear screen for OROPS canopy 53
Winch, low speed 1190
Sun screen 5
Fairlead, 3 rollers 322
Sweeps EROPS 120
Fairlead, 4 rollers 340
Sweeps OROPS 140
ES: Extreme service shoes
Hydraulics and Ripper:
MS: Moderate service shoes
Four valve for 5 VPAT bulldozer and ripper HD: Heavy-duty link track
(valve itself) 14.74 RBT: Rotating bushing track
Ripper, radial (with three curved teeth) 758
Each optional straight tooth, replacing curved tooth 34
Bulldozer Specifications
5 VPAT Blade
XL LGP
Blade capacity (SAE J1265) m3 2.6 2.6
Blade width (over end bits) mm 3077 3360
Blade height mm 1109 1127
Digging depth mm 430 415
Ground clearance mm 933 1001
Maximum tilt mm 460 491
Weight (without hydraulic controls) kg 1932 2000
D5N Track-Type Tractor