Professional Documents
Culture Documents
Catalogue 2021-HD: Belt Maintenance Equipment - Belt Lacing 750kN/m
Catalogue 2021-HD: Belt Maintenance Equipment - Belt Lacing 750kN/m
Catalogue 2021-HD: Belt Maintenance Equipment - Belt Lacing 750kN/m
Catalogue 2021-HD
MATO GmbH & Co KG, Main Production Facility and Administration Headquarters, Mühlheim a.M., Germany
Table of Contents
Belt Lacing Systems for High Tensile Conveyor Belts
Belt Clamp 60 kN 38
Belt Clamp 30 kN 38
T-Square 38
1,2,3. . §... Abc…..§…. Order No. Index, Terms & Conditions, General Remarks 40
Fasteners U68 and U68A are another step-up compared to our U30 Fasteners, so far the safest and the highest performance
mechnical Fasteners worldwide. Additionally, Fasteners U68 and U68A have a deeper reachback and higher plate thickness,
for more safety and wear resistance.
The outstanding features of both types are:
The S30S-System is used in applications where higher corrosion is a problem. In comparison to U30, the S30S has
stainless steel staples with press fit specialised to the material combinations.
3 Catalogue 2021 3
High Performance Fastener U68 I M2 c
Accessories I M2 c
for Machine Installed System U68 (limited use with systems U30, S30S, E30)
Belt Width Order No. kg
Screw Clamping Frame SS 68 (Stainless Steel)
For use with Lacers LM 35-68 and YM-D2S as well as
up to 1200mm 41 129 44 17 33.6 Machine Skivers XTV . For installation of Fastener series
up to 1400mm 41 129 44 18 36.2 U68A / U68
up to 1600mm 41 129 44 19 40.0 Picture see page 7
Screw Clamping Frame MF 68 (Stainless Steel) For use with Lacers LM 35-68 and YM-D2S as well as
Machine Skivers XTV / XTV-BS. For installation of Fastener
up to 1200mm 42 160 20 13 39.6
series U68A / U68. Speed up the installation process and
up to 1400mm 42 160 20 12 43.3
minimizes errors. Picture see page 8
up to 1600mm 42 160 20 11 47.4
4 Catalogue 2021 4
High Performance Fastener U30 I M2 c
5 Catalogue 2021 5
Stainless Steel Fastener S30S I M2 c
6 Catalogue 2021 6
Eco-Fastener E30 I M2 c
Accessories I M2 c
up to 1600 mm 41 129 44 09 40.0 For use with Lacers HM, LM and YM-D2S as well as Skivers
S, HD and XTV. For installation of Fastener series U30,
up to 1800 mm 41 129 44 10 44.0 S30S and E30
7 Catalogue 2021 7
Accessories
for Machine Installed Systems U30, S30S, E30, I M2 c
up to 1800 mm 42 160 20 04 51.7 For use with Lacers HM, LM, and YM-D2S as well as Belt
Skivers S, HD, XTV / XTV-BS. For installation of Fastener
up to 2000 mm 42 160 20 00 59.0 series U30, S30S, and E30. Quickens the installation
process and minimizes errors
8 Catalogue 2021 8
Accessories
Hydraulic Lacer YM-D2S 35-68
Description Order No. kg
Storage Case
9 Catalogue 2021 9
Accessories
for Machine Installed Systems U30, S30S, E30 I M2 c
Machine Skiver HD
Skiver Blade BS
10 Catalogue 2021 10
Accessories
for Machine Installed Systems U30, S30S, E30 I M2 c
WSS-Installation Unit
WSS-Installation Unit 43 121 34 40 0.7 consists of Clamping Unit
(PU= 10 pieces) und Clamping Piece
11 Catalogue 2021 11
Additional Accessories
Description Order No. kg
Mark and Cut
Belt Marker permanently marks conveyor belts. Marking
depth approx. 0.8 mm, width approx. 2.0 mm
I M2 c
Hammer Pin Driver 42 123 00 27 1.1
for Plain Connecting Pins
I M2 c
Inserting Tool 42 123 00 03 1.4
for Screw Connecting Pins
To install Screw
Connecting Pins. Both-
sided quick chuck for
counter-clockwise and
clockwise rotation.
Screw Pin Inserting Tool SS2 42 123 03 00 3.3
Working pressure 4 - 6
for Screw Connecting Pins
bar
I M2 c
Belt Skiving
12 Catalogue 2021 12
Selection Chart
Connecting Pins for Plate Fasteners
MATO Connecting Pins are aligned in design and material composition to MATO Fasteners. Choosing the
right Connecting Pin is important for reaching the optimum performance of the splice in your application.
L… - Design
High Tensile Galvanized Cable
13 Catalogue 2021 13
Connecting Pins
Plain Ends for Systems U68, U30, S30S, E30
14 Catalogue 2021 14
Connecting Pins
With Threaded Ends for Systems U68, U30, S30S, E30
15 Catalogue 2021 15
Connecting Pins
Plain Ends for Systems U68, U30, S30S, E30
1985 mm 42 129 29 10 0.8 Installation Tools for Connecting Pins see page 12
16 Catalogue 2021 16
Connecting Pins
With Threaded Ends for Systems U68, U30, S30S, E30
2000 mm 42 129 27 63 0.8 Installation Tools for Connecting Pins see page 12
17 Catalogue 2021 17
Connecting Pins
Plain Ends for Systems U68, U30, S30S, E30
18 Catalogue 2021 18
Connecting Pins
With Threaded Ends for Systems U68, U30, S30S, E30
19 Catalogue 2021 19
20 Catalogue 2021 20
Selection Chart
Hammer Installed Plate Fasteners
The Systems H30 and H60 are the strongest Hammer Systems. Belt ends with H30 / H60 are connectable to
belt-ends with U30 or S30S or E30. Its outstanding features are:
The MR30-System is a simple and easy to use Hammer System. In comparison to other Wide Plate Fasteners, the
MR30-System has a long life time and can be installed within a short time.
21 Catalogue 2021 21
Stainless Steel Fastener H30S and H60S I M2 c
22 Catalogue 2021 22
Eco-Belt Fastener H30E and H60E I M2 c
23 Catalogue 2021 23
Installation Units and Accessories
for Hammer Installed Systems H30 and H60
1200 mm 41 119 12 67 26.5 -Simply turn the Comb Pins to the required Fastener
size.
1400 mm 41 119 12 68 28.4 - The Installation Units HTA H60 are used for the
Fastener sizes H67CE and H67DE
1600 mm 41 119 12 69
- The low weight of the Installation Unit allows easy
handling
- Steel Frame.
Installation Unit HTS H67 C/D - Steel Frame - The Installation Unit HTS H37 is used to install the
Fastener sizes H37A and H37.
- The Installation Unit HTS H67 C/D is used to install the
Fastener sizes H67C and H67D.H67D.
600 mm 41 119 06 05 16.6
Pneumatic Hammer
Belt Skiver
24 Catalogue 2021 24
Accessories
for Hammer Installed Systems H30 and H60
Pneumatic Hammer
25 Catalogue 2021 25
Eco-Fastener MR30
Hammer Installed Plate Fasteners
up to 1400 mm 10 - 15 mm 46 000 10 49 4.9 Units: based on boxes with 2 Fastener Strips with length according
belt width, (can be shortened individually).Content is sufficient for
one complete lace. (without Connecting Pin)
Hammer
Hammer (3 kg)
Hammer H3 (3kg) 46 000 00 78 3.60
Lacing Head
Hammer-Lacing Head. For installing the
Lacing Head MRK MR30 46 000 10 56 3.20 Fastener series MR30
26 Catalogue 2021 26
Connecting Pins
Plain Ends for Systems H60, H30, MR30
27 Catalogue 2021 27
Connecting Pins
Plain Ends for Systems E30, H30, H60, MR30
28 Catalogue 2021 28
Connecting Pins
Plain Ends for Systems MR30
Connecting Pins L2
Min. Diameter 5.6 mm
Connecting Pins L3
High Tensile
Min. Diameter 6.9 mm
Galvanised
735 mm 42 129 15 86 0.2 Cable
785 mm 42 129 07 85 0.2
29 Catalogue 2021 29
30 Catalogue 2021 30
Standard Fastener MS I M2 c
The Screw System MS is used for belt splicing and rip repairs. It is easy to install. The Fastener guarantees
good compression into the belt (vice like effect)
31 Catalogue 2021 31
Standard Fastener MS I M2 c
32 Catalogue 2021 32
Installation Tools MS I M2 c
Power Punch
ML1-140-190 46 100 67 29 0.1
Bolt Breaker
SB1-140-190 46 100 67 20 0.4
33 Catalogue 2021 33
Templates MS I M2 c
34 Catalogue 2021 34
Repair Fastener S80 I M2 c
Packing units:
100 pieces per pack
Belt Fastener S87
Side Length 23 mm, Fastener Width 30 mm
35 Catalogue 2021 35
Belt repair MATO BOND
High Quality Polymer Glue Products for various repair options
Multiface® has been specially developed for maintenance of conveyor belts made of -Quick drying
rubber, PVC or PU as well as for the bonding of abrasion resistant lining (patent pending). -65 ShoreA
Multiface® is even usable for materials such as metal, glass, ceramics, wood, textile and -No hazardous product
many other plastic materials, when a high strength and permanently elastic gluing with a -Food contact approved according to EG 1935/2004
very thin gap is required.
Accessories
36 Catalogue 2021 36
37 Catalogue 2021 37
Safety Accessories I M2 c
for Heavy Duty Textile Conveyor Belts
Belt Clamp S - Admissible Working Load 30 kN, Belt Thickness 5 - 30 mm Safety is MATO's top priority; therefore, our Belt Clamps
are subject to high inspection requirements (e.g. 2-times
Belt Clamp S 30kN 920 to 1000 41 125 12 04 63.0 nominal load). They are load handling devices, they tension
and relieve the conveyor belt, and they are applied in pairs.
(Nominal Width: 1000 mm) While in service, they form a secure working area with a
relieved conveyor belt. They come in 2 nominal strengths
Belt Clamp S 30kN 1140 to 1220 41 125 12 15 73.6 30 kN and 60 kN
(Nominal Width: 1200 mm) Further sizes are available upon request
Other Accessories I M2 c
38 Catalogue 2021 38
Other Accessories I M2 c
Handle Assembly (for Rotary Belt Cutter) 46 000 10 68 1.1 Handle Assembly -
ECO suitable for all Handle Assembly -
Standard suitable for
Handle Assembly ECO 41 000 10 71 0.8 Rotary Belt Cutters
all Rotary Belt Cutters
(for Rotary Belt Cutter)
T-Square (for Rotary Belt Cutter) 46 000 10 66 2.2
T-Square suitable for all Rotary
Belt Cutters
up to 1500 mm 41 000 10 65 26.1 For a perfect symmetric cut in textile conveyor belts up to
15 mm thickness. Usable from both sides. Drive Handle* is
up to 1800 mm 41 000 10 72 29.8 removable. T-square can be dismounted
up to 1800 mm 42 123 01 00 54.8 For a perfect symmetric cut in textile conveyor belts from
15 - 35 mm thickness. Usable from both sides. designed
up to 2000 mm 42 123 01 06 62.5 especially for high tensile belts.
39 Catalogue 2021 39
40
Artikelnummern-Verzeichnis
40
40
40
40
40
40 Preisliste 2021 40
41
Artikelnummern-Verzeichnis
41
41
41
41
41
41 Preisliste 2021 41
General Conditions of Sales, Supply and Payment
20. October 2020
I. Quotation
The documentation pertaining to the quotation such as illustrations, drawings, details of weights and dimensions are only approximately authoritative where they are not
expressly designated as binding. The supplier retains the right to ownership and Copyright of all cost estimates, drawings and other papers. These must not be made
accessible to third parties The supplier has an obligation not to make accessible to third parties any plans designated as confidential by the purchaser, without the
latter's approva
42 Catalogue 2021 42
General Conditions of Sales, Supply and Payment
20. October 2020
6. The warranty period on the replacement items and the repair is three months, but this will run until the time of the expiry of the original warranty period for the
object supplied. If repairs are necessary the period of liability for the object supplied will be extended by the length of the interruption in operation caused by this.
7. Any modifications or repair work carried out on the part of the purchaser or a third party either inexpertly or without the prior approval of the supplier will cancel the
liability for the consequences such actions.
8. Further claims by the purchaser, especially claims for damage which did not occur on the supplied object itself are excluded. The exclusion of liability does not apply
if the owner or leading the owner or leading employee, the supplier is only liable for sensibly foreseeable damage typical of the contract. The exclusion of liability also
does not apply in cases where in accordance with the product liability law liability is accepted for damage to persons or property on privately used objects, where faults
exist on the object supplied. It also does not apply when properties.
IX. The rights of the purchaser to withdrawal, variation and other liability of the supplier
1. The purchaser can also withdraw from the contract is the whole provision of supplies and/or services becomes completely impossible for the supplier before the
transfer of risk. The same applies in the event of the supplier’s inability to deliver. The purchaser can also withdraw from the contract, for an order of objects of the
same type, the implementation of a part of the delivery becomes impossible with respect to quantity or he has a justified interest in refusing a partial delivery, if this is
not the case the purchaser can reduce the counter payment to suit.
2. If a delivery delay exists as defined under Section IV of the Conditions of Supply and if the purchaser grants the supplier who is in arrears with the delivery a suitable
extension period with an explicit declaration that after the expiry of this period he will refuse to accept the goods and/or services, and it this extended deadline is not
met, then the purchaser is entitled to withdraw.
3. If the impossibility occurs during the delay in acceptance or due to the fault of the purchaser then the purchaser remains obliged to make the counter payment.
4. The purchaser also has the right to cancellation of the contract if the supplier, through his own fault, allows a suitable extension period granted to him for repairs of
the supply of replacements with regard to a defect, as defined in the conditions of supply and attributable to him, to expire fruitlessly. The right of the purchaser to
cancellation of the contract also exists in other cases of failure of the supplier to repair or supply a replacement.
5. Further claims by the purchaser are excluded, especially to termination or reduction and also to compensation for damages of any kind i.e. also for any damages
which did not occur on the supplied object itself. This exclusion of liability does not apply if the owner or leading employee have acted with intent or gross negligence and
also if there has been blameworthy violation of essential obligations under the contract. In the event of blameworthy violations of essential obligations under the
contract, except in cases of intent or gross negligence by the owner of leading employee, the supplier is only liable for sensibly foreseeable damage typical of the
contract. The exclusion of liability also does not apply in cases where In accordance with the product liability law liability is accepted for damage to persons or property
on privately used objects, where faults exist on the object supplied. It also does not apply when properties are absent which were expressly promised when the promise
had the intention of covering the purchaser against damage which did not arise on the supplied object itself.
X. Court of jurisdiction
If the purchaser is a fully qualified merchant, a legal personage in public law or a legally separate property proceedings for all disputes arising from a contractual
relationship are to be taken at the court with jurisdiction for the supplier's head office or the branch of the supplier which made the delivery. The supplier is also entitled
lo take proceedings against the buyer at the court of jurisdiction for his head office.
43 Catalogue 2021 43
More High Quality Products for Belt Maintenance from MATO:
Catalogue 2021
MATO Product Divisions:
MATO GmbH & Co KG MATO Industries Ltd. MATO Corporation MATO Australia Pty Ltd.
Benzstr. 16-24 Unit 1 Philips Road 201 Resource Drive 39 Bonville Avenue
63165 Mühlheim a.M. Whitebirk Ind. Estate Beckley, WV 25801 Thornton, NSW 2322
Germany Blackburn, Lancashire West Virginia USA Australia
Tel.: +49 (0) 6108 - 906-0 Bb1 5PG United Kingdom Tel.: +1- 304 - 255 1280 Tel.: +61 1300-850 795
Fax: +49 (0) 6108 - 906-120 Tel.: +44 (0) 1254 - 387638 Fax: +1- 304 - 255 2501 Fax: +61 2 4936-1388
www.mato.de Fax: +44 (0) 1254 - 238023 info@mato-usa.com maus@mato.com.au
beltlacing@mato.de info@mato.co.uk
MATO France S.A.R.L. MATO Iberica, S.L. MATO Industrial Technology MATO Products Pty Ltd.
Zone Artisanale du Grunhof Pol. Industrial Mora Garay (Qufu) Co., Ltd. P.O. Box 224
2 Rue du Grunhof Calle Marie Curie, parc. 36/38 West End of Changchun Road, Kempton Park 1620
57890 Porcelette, France E-33211 Gijón, Spain Development Zone of Qufu City 28 Forge Road Spartan
Tel.: +33 -(0) 3 - 87821215 Tel.: +34 (0) 985 - 328900 / 328211 273100 Qufu City, Shandong South Africa
Fax: +33 - (0) 3 -87297213 Fax: +34 (0) 985 - 322647 China, PRC Tel.: +27 (0) 11-928 4163
mato.france@mato.de matoiberica@matoiberica.es Tel: +86-537-4533799 Fax: +27 (0) 11-923 6071
Fax:+86-537-4533299 matosales@multotec.co.za
Q
03142 Kiew 100009 Karaganda
Ukraine Republic Kasachstan
Tel.: +38 (0) 504759258 Tel.: +7- (0) 7 212 910 063
ygm1@mail.ru Fax: +7- (0) 7 212 910 063
office@mato.kz