The document discusses backing up and restoring customized exam preset and system setup parameters on a z.one ultra or miniCart ultrasound system. These parameters can be backed up to removable media to protect them from being lost due to software upgrades or hardware replacements. The backup process involves inserting a USB drive and using menu controls to select the parameters to back up. Restoring involves inserting the backup media and using similar menu options to retrieve the saved parameters and overwrite the current ones. Regular backups are recommended whenever changes are made to allow completely restoring the previous configuration if needed.
The document discusses backing up and restoring customized exam preset and system setup parameters on a z.one ultra or miniCart ultrasound system. These parameters can be backed up to removable media to protect them from being lost due to software upgrades or hardware replacements. The backup process involves inserting a USB drive and using menu controls to select the parameters to back up. Restoring involves inserting the backup media and using similar menu options to retrieve the saved parameters and overwrite the current ones. Regular backups are recommended whenever changes are made to allow completely restoring the previous configuration if needed.
The document discusses backing up and restoring customized exam preset and system setup parameters on a z.one ultra or miniCart ultrasound system. These parameters can be backed up to removable media to protect them from being lost due to software upgrades or hardware replacements. The backup process involves inserting a USB drive and using menu controls to select the parameters to back up. Restoring involves inserting the backup media and using similar menu options to retrieve the saved parameters and overwrite the current ones. Regular backups are recommended whenever changes are made to allow completely restoring the previous configuration if needed.
10-6 z.one ultra and z.one miniCart OPERATOR MANUAL 4.0
(Exam) Preset Mgmt/System Setup: Backup/Restore
The SmartCart and miniCart have two different categories of customized parameters that can be created from customer-specific settings that are configured by the Operator. These two categories are: • (Exam) Preset Mgmt • System Setup The (Exam) Preset Mgmt category consists of customized image setup parameters (depth, frequency, etc.) that can be created for each transducer for each mode of operation. These customized user presets allow for a one-time setup of commonly used configurations and control settings by the Operator. The System Setup category of configurable settings includes parameters such as institution name, date/time, DICOM settings, function key assignments, etc. To protect these customized parameters, the operator should save them on a regular basis whenever changes have been made to removable media (e.g., USB Memory Stick). The removable media can then be used to instantly restore the SmartCart or miniCart to its complete previous operating configuration in the case of a post-software upgrade or Scan Engine replacement. You can create or modify (Exam) Presets. Simply make the imaging changes to the (Exam) Preset. Go to the (Exam) Presets tab and scroll down to Preset Mgmt. Choose Create or Modify to make the new Preset. Backing-Up (Exam) Preset Mgmt/System Setup To backup (Exam) Preset Mgmt and System Setup to removable media: To Backup (Exam) Preset Mgmt 1. Power on the SmartCart, miniCart, or Scan Engine and allow it to fully boot. 2. Insert the Presets/System backup removable media into the USB port at the rear of the SmartCart, miniCart, or Scan Engine. 3. A popup window will appear saying Install media detected. Do you wish to install new software? Select No and press the Set button. 4. Using the Tab key, tab to the Tools tab. 5. Using Menu Control, highlight Preset Admin and press the Select key to activate. 6. Using Menu Control, highlight Backup Presets and press the Select key to initiate the storage of user presets to the removable media. To Backup System Setup 1. Power on theSmartCart, miniCart, or Scan Engine and allow it to fully boot. 2. Insert the Presets/System backup removable media into the USB port at the rear of the SmartCart, miniCart, or Scan Engine. 3. A popup window will appear saying Install media detected. Do you wish to install new software? Select No and press the Set button. 4. Using the Tab key, tab to the Tools tab. 5. Using Menu Control, highlight Preset Admin and press the Select key to activate. 6. Using Menu Control, highlight Backup System and press the Select key to initiate the storage of system settings to the removable media. Restoring (Exam) Preset Mgmt/System Setup To restore (Exam) Preset Mgmt and System Setup from the removable media on which they were previously stored, perform the following procedures. To Restore (Exam) Preset Mgmt 1. Power on the SmartCart, miniCart, or Scan Engine and allow it to fully boot. 2. Install the removable media containing the previously backed up (Exam) Presets into the USB port at the rear of the SmartCart, miniCart, or Scan Engine. 3. A popup window will appear saying Install media detected. Do you wish to install new software? Select No and press the Set button. 4. Using the Tab key, tab to the Tools tab. 5. Using Menu Control, highlight Preset Admin and press the Select key to activate. 6. Using Menu Control, highlight Restore Presets and press Select. 7. A window appears asking if you want to restore All, Exam Type, or a Single Preset. 8. Choose one of the above, make your changes, and press Apply. To Restore System Setup 1. Power on the SmartCart, miniCart, or Scan Engine and allow it to fully boot. 2. Install the removable media containing the previously backed up System Setup parameters into the USB port at the rear of the SmartCart, miniCart, or Scan Engine. 3. A popup window will appear saying Install media detected. Do you wish to install new software? Select No and press the Set button. 4. Using the Tab key, tab to the Tools tab. 5. Using Menu Control, highlight Preset Admin and press the Select key to activate. 6. Using Menu Control, highlight Restore System, and press the Select key to initiate the retrieval of the System setup parameters from the removable media. 7. A window appear asking Are you sure you want to overwrite the system preset contents? 8. Select Yes/No and press the Set button. NOTE: System Restore includes everything under System Setup such as networking, DICOM, Function keys, and Calcs.