Professional Documents
Culture Documents
Botonera DRC MP
Botonera DRC MP
DRC-MP D3
radio control system
Combination of proven
controls and state-of-the-art
radio transmission
Wherever radio control systems are used to control
cranes, hoists, industrial doors, machinery, plant and
equipment, you can benefit from much greater
flexibility than with wire-connected controls.
Our new DRC-MP D3 relay receivers are ideal wireless
solutions for controlling machinery, hoists and cranes
with conventional contactor control, while offering
users many new and useful features:
2
41440-2
and or or
F2
F1
43648944
43649044
F2
F1
One transmitter can control two Demag DRC-MP radio receivers in One transmitter can control one of a maximum of three pre-paired
parallel, enabling one crane to be controlled by several distributed Demag DRC-MP radio receivers. The active radio receiver transfers the
receivers, for example. The STOP functions of both receivers are commands to the relevant crane. The transmitter can be switched
synchronised. between the receivers by pressing a combination of buttons.
3
39494-1
39233-5
39487-1
DRC-10 D3 pushbutton DRC-J D3 joystick transmitter DRC-MP D3 receiver
transmitter ••1 joystick for the lifting/ ••Supply voltage
••6 buttons, either as variable lowering axis 24 V DC/AC up to 240 V AC,
buttons or 2-stage buttons ••1 joystick for two motion axes +/- 10%, 50–60 Hz
••To control up to three motion axes (long and cross travel) ••Output relay for 250 V, 8 A, AC11
••Horn/limit switch test button ••Horn/start buttons and limit switch ••PWM outputs for variable inverter
••Stop button test button control
••2 buttons for special functions ••4 buttons for special functions ••3 digital feedback channels
••Vibration alarm that can be used together with ••Feedback channel to show load
••Two-colour LC display DRC-MP D3 information on transmitter display
••Fast charging: 2.5 hours to charge ••Mechanical key-operated switch to ••Multi-transmitter mode:
– 5 days of operation with one turn the transmitter on and off up to 3 different transmitters can
rechargeable battery charge ••Vibration alarm be paired, fast switchover/change
••Rugged housing ••Two-colour LC display between transmitters possible
••Weight incl. rechargeable battery: ••Interchangeable battery system, ••Various multi-receiver
520 g external charging station, at least 8 operating modes
••IP 55 enclosure hours of operation with one ••IP 65 enclosure
••Temperature range -20 to +50 °C battery charge ••Temperature range -20 to +70 °C
••Weight incl. rechargeable battery: ••W x H x D: 256 x 183 x 104 mm
1800 g
••IP 55 enclosure
••Temperature range -20 to +70 °C
Pushbutton transmitter with variable Ident. no. 773 793 44 Ident. no. 773 795 44 No liability for errors or omissions. Subject to change.
buttons ident no. 773 791 44
0717 EN/DE 213 805 44 701 IS 975