The document provides instructions for building a bangkito, including measuring and cutting wood and plywood pieces to specific dimensions, attaching the wood legs to the plywood with nails and a hammer, smoothing surfaces with sandpaper, applying varnish, and letting the varnish dry before use.
The document provides instructions for building a bangkito, including measuring and cutting wood and plywood pieces to specific dimensions, attaching the wood legs to the plywood with nails and a hammer, smoothing surfaces with sandpaper, applying varnish, and letting the varnish dry before use.
The document provides instructions for building a bangkito, including measuring and cutting wood and plywood pieces to specific dimensions, attaching the wood legs to the plywood with nails and a hammer, smoothing surfaces with sandpaper, applying varnish, and letting the varnish dry before use.
Hammer, Nails, Sandpaper, Varnish, and a Paintbrush.
Measure the plywood and the wood. For the
Plywood, 12”x7” for the plywood and 4 cuts of 7” for the wood as the leg of the bangkito, and also 2 cuts of 8” for the support of the leg.
After measuring the plywood and wood, cut it using
a cutting saw. Make sure that it will have even edges and the exact length for better results
Get the wood for the leg of the bangkito and to
attach it to the plywood, use a nail and hammer, hammer the nail so the leg will be attached to the plywood, Repeat this process until it’s done. To smoothen out the edges and the surface of the bangkito, use sandpaper. Rub the sandpaper against the surface until it is smooth.