Professional Documents
Culture Documents
IOT Assignment
IOT Assignment
Enrolment No.-0829IT181023
Subject- Internet of Things
3. Scalability –
The number of elements connected to the IoT zone is increasing day by day.
Hence, an IoT setup should be capable of handling the massive expansion.
The data generated as an outcome is enormous, and it should be handled
appropriately.
5. Architecture –
IoT architecture cannot be homogeneous in nature. It should be hybrid,
supporting different manufacturers ‘ products to function in the IoT network.
IoT is not owned by anyone engineering branch. IoT is a reality when
multiple domains come together.
6. Safety –
There is a danger of the sensitive personal details of the users getting
compromised when all his/her devices are connected to the internet. This
can cause a loss to the user. Hence, data security is the major challenge.
Besides, the equipment involved is huge. IoT networks may also be at the
risk. Therefore, equipment safety is also critical.
2. What is an embedded system on an IoT device?
Answer 2)
While embedded systems are computing systems, they can range from having no user
interface (UI) -- for example, on devices designed to perform a single task -- to complex
graphical user interfaces (GUIs), such as in mobile devices. User interfaces can
include buttons, LEDs (light-emitting diodes) and touchscreen sensing. Some systems
use remote user interfaces as well.
1. Static characteristics :
It is about how the output of a sensor changes in response to an input change after
steady state condition.
• Accuracy –
Accuracy is the capability of measuring instruments to give a result close to the
true value of the measured quantity. It measures errors. It is measured by absolute
and relative errors. Express the correctness of the output compared to a higher
prior system. Absolute error = Measured value – True value
Relative error = Measured value/True value
• Range –
Gives the highest and the lowest value of the physical quantity within which the
sensor can actually sense. Beyond these values, there is no sense or no kind of
response.
e.g. RTD for measurement of temperature has a range of -200`c to 800`c.
• Resolution –
Resolution is an important specification towards selection of sensors. The higher
the resolution, better the precision. When the accretion is zero to, it is called
threshold.
Provide the smallest changes in the input that a sensor is able to sense.
• Precision –
It is the capacity of a measuring instrument to give the same reading when
repetitively measuring the same quantity under the same prescribed conditions.
It implies agreement between successive readings, NOT closeness to the true
value.
It is related to the variance of a set of measurements.
It is a necessary but not sufficient condition for accuracy.
Dynamic Characteristics :
Properties of the systems
• Zero-order system –
The output shows a response to the input signal with no delay. It does not include
energy-storing elements.
Ex. potentiometer measure, linear and rotary displacements.
• First-order system –
When the output approaches its final value gradually.
Consists of an energy storage and dissipation element.
• Second-order system –
Complex output response. The output response of the sensor oscillates before
steady state.
Intelligent machines can exchange information without human assistance and even
coordinate and perform actions. In this article, you’ll learn the basics of M2M
communication, including how it came about, how it works, and when and where it is
used. Discover the advantages of this technology for your own business. Machine-to-
machine (M2M) communications means the largely automated exchange of information
between technical devices themselves, for example, machines, vending machines,
vehicles, or measuring equipment (e.g. electricity, gas and water meters), or between the
devices and a central data processing unit. Machine-to-machine refers to a device that
detects an event and forwards it to an application via a network. This application then
translates the transmitted event into understandable information.
The main purpose of machine-to-machine communication is to collect data and transmit it to
a network. Another goal of M2M is to automatically perform actions that are triggered by
sequences of events. Additionally, the art of machine learning can be used so that
machines optimize their action sequences. This application for M2M technology is closely
related to artificial intelligence and is the basis for the Internet of Things.
IPv4 IPv6