Professional Documents
Culture Documents
User Manual: Models
User Manual: Models
User Manual: Models
USER MANUAL
WIRELESS TRAIL CAMERA
Models:
TINY-W3
TINY-WBF
TINY-PLUS
TINY-7
v2.0
This manual will guide you through all the features of your device GG Telecom’s mission is to offer products that are easy
so that you will get optimal use out of your SPYPOINT product. to use, innovative, affordable and of exceptional quality.
Our SPYPOINT products are mainly used for hunting and
Our priority is to provide outstanding customer service. If you need residential/commercial surveillance. They are distributed and
support for your product, please contact the SPYPOINT technical shipped all over the world and the market never stops growing.
support or visit our website. Prosperous and respected, GG Telecom is a company that constantly
keeps abreast of new technologies and listens to its customers to
deliver cutting-edge products with practical solutions that improve
CONTACT hunting and outdoor activities.
1-888-779-7646
JOIN THE SPYPOINT COMMUNITY
tech@spypoint.com
facebook.com/SPYPOINT
www.spypoint.com twitter.com/SPYPOINTcamera
youtube.com/SPYPOINTtrailcam
3
Package content TINY
CHOOSE A POWER SOURCE 1 GB capacity) in the card slot, gold contacts um battery pack (LI
Models: facing up. The card is inserted correctly when rately.
(controller included with TINY-W3) recorded.
TRAIL CAMERA 4
5
6 alkaline AA batteries Lithium battery pack 6 5 SD card slot An SD card is requi
devices accept SD/S
LIT-09/LIT-C-8 7
SYSTEM USB Audio-video BLACKBOX* BLACKBOX-D** 3. INSTALL THE CAMERA WITH THE SUPPLIED STRAP
32 GB (not included
14
Viewing screen
Battery switch
12 3
• LIT-09*
• 12V +controller
LIT-09*
3
5
functions.
1
1. Insérez
1.l’extrémité
Insérez1. l’extrémité
Insérez
de la courroie
l’extrémité
de la courroie
dans
de la
la fente
courroie
dans la fente
dans la fente 2. Insérez2.la
Insérez
courroie
2. la
Insérez
courroie
dans la
la fente
courroie
dans sous
la fente
dans
le levier
sous
la fente
le levier
sous le levier 3. Créer 3.
uneCréer
tension
3.
une
Créer
sur
tension
laune
courroie
sur
tension
la courroie
ensur
la tirant
la courroie
en vers
la tirant
en la
vers
tirant vers
BLACKBOX-D controller
SPYP INT
BLACKBOX receiver
1 Antenne Permet la commun
qui se trouve
qui seautrouve
dos
qui se
duau
trouve
mécanisme.
dos duaumécanisme.
dos du mécanisme. et faites-la
et ressortir
faites-la
et faites-la
ressortir
en arrière.
ressortir
en arrière.
en arrière. la droite,lapuis
droite,
rabattez
lapuis
droite,
rabattez
verspuis
la gauche
rabattez
vers lalegauche
vers
levier
lapour
le
gauche
levier le
pourlevier pour
TINY
INSÉRER UNE CARTE MÉMOIRE
2) Prise qu’une batterie 12
Récepteur panneau KIT6V-12V) ou un a
CHOISIR UNE SOURCE D’ALIMENTATION (jusqu’à une capacité de 32 Go) dans la fente solaire tous vendus séparé
(TINY-W receiver, BF
pour carte SD, contacts dorés vers le haut. La (BLACKBoX-D
2) Permet égaleme
seulement)
carte est correctement insérée lorsqu’un clic neau solaire (SP-12
Guide de ConnecteursModèles: Connecteurs
BLACKBOXMC
Insérer connecteurs
en premier
1 se fait entendre. du bloc pile lithium
séparément.
démarrage rapide Caméra Guide de Courroie 1 (récepteur inclus avec TINY-WBF)
TINY-W3 controller)
démarrage d’installation 3 Fente pour Permet d’installer
2 2
rapide courroie courroie d’installati
3 d’installation
SYSTÈME DE
4
Avant d’insérer ou de retirer une carte mémoire, toujours mettre
4
BLACKBOXMC-D la caméra à3 OFF pour éviter que les images présentes sur la carte
4 Compartiment Insérer 6 piles AA
6 piles AA alcalines (contrôleur
Blocinclus avec TINY-W3)
pile lithium
CAMÉRA DE 5 LIT-09/LIT-C-8
soient supprimées ou endommagées.
5 à piles contrôleur BLACKBO
alimentés au moye
CHASSE SANS Câble Câble BLACKBOX* BLACKBOX-D**
6
3. INSTALLER LA CAMÉRA À L’AIDE 6DE LA COURROIE rechargeable (LIT-0
audio-vidéo FOURNIE 7 ment).
FIL
USB Nous recommandons l’utilisation de piles neuves afin d’assurer
7 8 9 un rendement maximal de la caméra. Les piles AA rechargeables 5 Fente pour Une carte SD est né
sont déconseillées. Contrôleur carte SD des photos. Les app
Modèles: * TINY-WBF ** TINY-W3 Guide de démarrage rapide
Position du commutateur (selon la source d’alimentation)
BLACKBoX-D mémoires de type
capacité de 32 Go (
TINY-PLUS v1.4
TINY-WBF
TINY-W3
Composants
10
1
Source d'alimentation
• 6 AA
Mise en route Position du commutateur
8
6 Témoin
lumineux
Dans la minute su
du récepteur, les 8
1 Lentille photo 10 Bouton de mise sous tension mettent de connaîtr
TINY-7 • 12V
• 12V Configuration du récepteur
ALK
2
2 1 témoin lumineux, pu
2 Antenne (si applicable) 11 Lumière “BUSY” 11 + 6 AA
v1.5
BLACKBOX le témoin lumineux
3 DEL invisibles 12 Boutons de navigation 9 indiquer la période d
12 • LIT-09*
support.spypoint.com
3
• 12V Configuration du contrôleur
4 Lumière de test 13 Écran de visionnement + LIT-09* RECH 3 7 ON/OFF Permet d’allumer ou
5 Détecteurs de côté (2) Commutateur • Panneau solaire + LIT-09* 5
14 13 BLACKBOX-D
8 Lumière BUSY S’allume lorsque le
1-888-779-7646 6 Lentille de détection 15 Microphone * Bloc pile lithium rechargeable, vendu séparément (LIT-09) ou avec 4
10
fichier.
tech@spypoint.com
(située devant le détecteur
central)
16 Fente pour carte SD
14 15 16 17 18 19 20 21 4 Messages d’erreur
un chargeur (LIT-C-8). 11
9 Écran de Permet d’accéder a
7 Ouverture pour câble 17 Support amovible pour piles
12 visionnement le niveau des piles e
cadenas 18 Port USB Instructions complètes
8 Support pour trépied 19 Prise 12V/panneau solaire 5 www.spypoint.com
7 Écran avec fonctio
ment dans l’image.
Ajoutez votre camÉra À votre 9 Fente pour courroie
compte gratuit dès maintenant!
mySPYPOINT.com d’installation
20
21
Prise déclenchement externe
Sortie TV 1. Insérez
1.l’extrémité
Insérez1. l’extrémité
Insérez
de la courroie
l’extrémité
de la courroie
dans
de la
la fente
courroie
dans la fente
dans la fente 2. Insérez2.la
Insérez
courroie
2. la
Insérez
courroie
dans la
la fente
courroie
dans sous
la fente
dans
le levier
sous
la fente
le levier
sous le levier 3. Créer 3.
uneCréer
tension
3.
une
Créer
sur
tension
laune
courroie
sur
tension
la courroie
ensur
la tirant
la courroie
en vers
la tirant
en la
vers
tirant vers
qui se trouve
qui seautrouve
dos
qui se
duau
trouve
mécanisme.
dos duaumécanisme.
dos du mécanisme. et faites-la
et ressortir
faites-la
et faites-la
ressortir
en arrière.
ressortir
en arrière.
en arrière. la droite,lapuis
droite,
rabattez
lapuis
droite,
rabattez
verspuis
la gauche
rabattez
vers lalegauche
vers
levier
lapour
le
gauche
levier le
pourlevier pour
maintenirmaintenir
la position.
maintenir
la position.
la position.
BLACKBoX zu 32 GB) in den Kartenleser der Kamera,
Anschluss hältlich.
Empfänger goldene Kontakte nach oben. Wenn ein
(BLACKBoX-D)
klicken zu hören ist, wurde die Karte korrekt
Kontakte Kontakte Mit den Kontakten
eingelegt.
2) Ermöglicht ein S
Schnellstartanleitung
zuerst einlegen 1 chließen, um die L
Modelle: Pack (LIT-09/LIT-C
Kamera Schnellstar- Befesti- 1 BLACKBOX TM
(separate erhältlich
tanleitung gungsgurt (BLACKBOXTM-Empfänger im Lief-
2 Vor dem Einsetzen oder Entfernen einer Speicherkarte, schalten
DRAHTLOS 3
erumfang der TINY-WBF enthalten) 2
Sie die Kamera immer vorher aus, um einen Verlust oder eine
3 Löcher für
den Befesti-
Ermöglicht die Insta
dem enthaltendem
Beschädigung von den bereits vorhandenen Aufnahmen zu ver-
WILDKAMERA- 4 BLACKBOX
6 Alkaline AA-Batterien -D TM
Lithium-Akku-Pack hindern. 3
4 gungsgurt
(BLACKBOX -Steuergerät im Lief-
SYSTEM
TM
5 LIT-09/LIT-C-8 4 Batteriefach Betrieben durch 6
erumfang der TINY-W3 enthalten) 5 Batterien. Die BLA
USB Audio/Video- BLACKBOX* BLACKBOX-D**
6
3. INSTALLATION DER KAMERA MIT DEM
6
MITGELIEFER zlich noch durch da
Kable Kable TEN BEFESTIGUNGSGURT ium-Ion Batteriepac
Modelle: 7 8 9 Wir empfehlen, neue Batterien zu verwenden, um die maximale
7 09/LIT-C-8, separat
TINY-PLUS Leistung aus Ihrer Kamera herauszuholen. Weiterhin wird die 5 SD-Kartens- Für Foto-Aufnahm
TINY-WBF Verwendung von wiederaufladbaren AA-Batterien nicht empfohlen.
schnellstartanleitung
* TINY-WBF ** TINY-W3 teckplatz benötigt. Die Gerät
BLACKBoX-D
TINY-W3 Schalterstellung abhängig (von der Energiequelle) steuergerät
Speicherkarten bis z
TINY-7 Komponenten v1.4
6 Test-LED In der Minute nach d
1
Energiequelle Schalterstellung
v1.5 1 Fotolinse 10 Power-Taste
10 Starten fängers, wird in de
Batteriestatus über
• 6 AA 8
2 Antenne (falls zutreffend) BUSY LED • 12V ALK Die restliche Zeit bli
• 12V +Einrichtenden BLACKBOX-
11 11
2 6 AA um die Synchronisa
support.spypoint.com 3 Unsichtbare LEDs Bedienschaltfläche 2 1
www.spypoint.info
12
12 Empfänger 7 ON/OFF Ermöglicht das Aus-
USB
4 Test-LED 13 Betrachtungs-Bildschirm • LIT-09* 9
Audio-video
• 12V + LIT-09*
Einrichten den -
3
5 Seitliche Bewegungsmelder 14 Batterieschalter RECH
BLACKBOX-D 8 BUSY-LED Blinkt auf, wenn da
+49 (0) 36331 50540 (2)
13
• Solarpanel + LIT-09* 3 nahme erhält.
6 Fresnel-Linse
15 Mikrofon
Steuergerät 5
16 SD-Kartensteckplatz * Wiederaufladbarer Lithium-Akku-Pack (LIT-09) oder mit Ladegerät 9 Betrachtungs- Um auf das Hauptm
info@eurohunt.de
4
(vor dem zentralen Bewe 14 15 16 17 18 19 20 21 10
(LIT-C-8), separat erhältlich. 4
gungsmelder) 17 Herausnehmbarer Batteriehalter Fehlermeldungen Bildschirm den Batteriestatus
cable
11 betrachten. Bildsch
cable
7 Löcher für das Kabelschloss 18 USB-Anschluss
12
12V/Solar-Panel-Anschluss Vollständige Instruktionen 10 Bedienschalt- Tasten zur Navigati
5
8 Stativgewinde 19
Fügen Sie jetzt Ihre Kamera zu 7 fläche
Ihrem kostenlosen Benutzer hinzu!
mySPYPOINT.com 9 Löcher für den Befesti 20 Externe Auslöser-Buchse www.spypoint.com
gungsgurt 21 TV-Ausgang www.spypoint.info 1. Insérez
1.l’extrémité
Insérez1. l’extrémité
Insérez
de la courroie
l’extrémité
de la courroie
dans
de la
la fente
courroie
dans la fente
dans la fente 2. Insérez2.la
Insérez
courroie
2. la
Insérez
courroie
dans la
la fente
courroie
dans sous
la fente
dans
le levier
sous
la fente
le levier
sous le levier 3. Créer 3.
uneCréer
tension
3.
une
Créer
sur
tension
laune
courroie
sur
tension
la courroie
ensur
la tirant
la courroie
en vers
la tirant
en la
vers
tirant vers
qui se trouve
qui seautrouve
dos
qui se
duau
trouve
mécanisme.
dos duaumécanisme.
dos du mécanisme. et faites-la
et ressortir
faites-la
et faites-la
ressortir
en arrière.
ressortir
en arrière.
en arrière. la droite,lapuis
droite,
rabattez
lapuis
droite,
rabattez
verspuis
la gauche
rabattez
vers lalegauche
vers
levier
lapour
le
gauche
levier le
pour
levier pour
maintenirmaintenir
la position.
maintenir
la position.
la position.
TINY
INSERIRE LA SCHEDA DI MEMORIA e la telecamera.
Inserite una scheda SD/SDHC (fino a 32 GB)
Sistema di LA
1. SCEGLIERE Wireless-Backup CoMpoNENti
2 1) Connes- 1) L’apparecchio pu
FONTE D’ENERGIA nell’apposita fessura, I contatti riversi verso sione 12V entrata 12 Volt DC c
l’alto. Se è udibile un click la scheda è stata dattattore 12 V, acq
BLACKBoX inserita correttamente.
Inserire con i con-
2) Connes-
Contatti Contatti Ricevitore
2) Permette di atta
pre la telecamera, per evitare il danneggiamento o la perdita di
nastro di po- il laccio incluso nell
WILD CAMERA 4
6 pile alcaline AA Pacco pile Lithio
2
dati registrati.
sizionamento
WIRELESS 5 BLACKBOX -D
LIT-09/LIT-C-8 4
TM
3 4 Vano batterie Alimentato da 6 bat
Cavo Cavo audio- BLACKBOX* BLACKBOX-D**
6
Dispositivo di controllo BLACKBOX
contenuto nella fornitura TINY-W3
TM
3. INSTALLAZIONE DELLA TELECAMERA CON IL LACCIO
5
La BLACKBOX-D po
USB video INCLUSO NELLA CONFEZIONE inoltre con il pacco
Consigliamo di utilizzare batterie nuove, per avere il Massimo
Modelli: 7 8 9 della telecamera. Inoltre si sconsiglia l’uso di batterie ricaricabili. 6
bile separatamente
TINY-PLUS 7 5 Lettore SD Per registrazioni fo
TINY-WBF * TINY-WBF ** TINY-W3 Posizione interruttore batteria (dipendente dalla fonte d’energia) SD. L’apparecchio
TINY-W3 Manuale
Fonte d’energia d’istruzione
Posizione interrutore batteria
SDHC fino a 32 GB
TINY-7 Componenti
1 Lente fotografica 11 BUSY-LED 10
per avvio veloce
• 6 AA
• 12V ALK v1.4
BLACKBoX-D
Dispositivo di controllo
6 LED test Nel minuto a segui
tore, nei primi 8
v1.5 livello batteria. Il
• 12V + 6 AA
1
2 Antenna (se corrisponde) 12 Telecomando lampeggia in modo
11 Avvio periodo di sincroniz
3 LED invisibili 13 Diplay per visualizzazione • LIT-09* 8
support.spypoint.com 12 • 12V + LIT-09* RECH
4 LED test 14 Battery switch
Impostare del ricevitore 7 ON/OFF Accensione e spegn
5 Rilevatore movimento 15 Microfono 2
• Pannello solare + LIT-09*
BLACKBOX
2 1
8 BUSY-LED Lampeggia quando
+49 (0) 36331 50540 laterale (2) 16 Lettore SD
13
* Pacco batteria ricaricabile al litio (LIT-09) o con caricabatteria 9 riceve una registraz
(LIT-C-8), ottenibili separatamente.
6 Lente Fresnel Impostare del dispositivo de
info@eurohunt.de
(davanti al rilevatore
centrale)
17
18
Contenitore batterie amovibile
Presa USB 14 15 16 17 18 19 20 21
3 control BLACKBOX-D
3
5
9 Diplay
visualizzativo
Per visualizzare il
dere lo stato delle b
7 Fori per il cavo lucchetto 19 Connessione 12V / pannello le registrazioni. Sch
4
10
solare 4
8 Filettatura per treppiede Messaggi d’errore 11 10 Telecomando Tasti per navigazio
9 Fori per il nastro di 20 Presa per sistemi di scatto controllo.
Aggiungi ORA la fotocamera
mySPYPOINT.com posizionamento esterni
Istruzioni complete
12
al tuo account gratuito! 10 Tasto Power 21 Uscita TV
5 www.spypoint.com
1. Insérez
1.l’extrémité
Insérez
qui se trouve
1. l’extrémité
Insérez
de la courroie
qui seautrouve
dos
qui se
duau
l’extrémité
trouve
de la courroie
mécanisme.
dos du
dans
de la
la fente
aumécanisme.
courroie
dans la fente
dos du mécanisme.
dans la fente 2. Insérez2.la
Insérez
et faites-la
courroie
2. la
Insérez
et ressortir
faites-la
courroie
dans la
la fente
et faites-la
ressortir
courroie
dans sous
en arrière.
la fente
ressortir
dans
le levier
en arrière.
sous
la fente
en arrière.
le levier
sous le levier 3. Créer 3.
uneCréer
tension
la droite,lapuis
3.
une
Créer
droite,
sur
tension
rabattez
maintenirmaintenir
lapuis
la position.
laune
droite,
maintenir
courroie
sur
tension
rabattez
verspuis
la position.
la courroie
ensur
la gauche 7
la tirant
rabattez
la courroie
en vers
vers lalegauche
la position.
vers
la tirant
levier
lapour
le
en la
gauche
vers
tirant vers
levier le
pour
levier pour
www.spypoint.info
hasta 32 GB) en el lector de tarjetas de la
cámara con los contactos dorados hacia ar-2 1) Conexión 1) El aparato puede
Sistema de soporteContactos
inalámbrico CoMpoNENtEs
riba. Cuando oiga clic esto significará que la 12V trada DC 12V como
Contactos Colocar primero tarjeta ha sido correctamente colocada. de 12V o mediante
Antes de insertar o retirar la tarjeta de memoria, apague la cá-
4
CÁMARA DE 4
6 pilas alcalinas AA
BLACKBOXTM
(Receptor-BLACKBOX
Una batería de
TM
incluido en
litio
mara para prevenir que las imágenes ya tomadas sean dañadas o3 Orificios para Permite al usuario
borradas.
CAZA 5 el TINY-W LIT-09/LIT-C-8
) BF 2 la cinta de
fijación
zando la cinta de fij
11
Tecla de alimentación
BUSY-LED
10
Guía
• 6 AA de inicio rápido v1.4
BLACKBoX-D
Dispositivo de control
SDHC de hasta 32 G
11
1
2 12
3 13
4
14
5
6
7 8 9 10 15 16 17 18 19 20 21 22 23
5
Components • Camera TINY
1 Photo lens Image sensor and infrared filter. 17 Access to the time Battery that keeps the time and date in
2 Antenna Allows wireless communication between the battery memory.
(TINY-PLUS, TINY-WBF, camera and a BLACKBOX (receiver/control- 18 SD card slot An SD card is required to record photos/
TINY-W3) ler). videos.
3 LEDs Night lighting to obtain black and white photos 19 Removable battery Holder for AA batteries or a rechargeable
and videos. holder lithium battery pack.
4 Test light Flashes in TEST mode when there is detec- 20 USB port To transfer photos/videos to a computer.
tion and flashes 60 seconds in PHOTO/VIDEO
mode to allow the user to leave without being
21 1)12V power jack 1) This camera can be powered from an
photographed or recorded.
external 12-volt DC input such as a 12V
5 Side sensors (2) Allows to prepare the camera so when the 2)Solar panel jack battery or a 12V adapter, each sold sepa-
target passes through the central sensor, the rately.
system is already pre triggered. When acti-
2) Allows the user to connect a solar panel
vated, the detection area is expanded.
(SP-12V) to maintain the charge of the
6 Fresnel lens Expands the detection area and increases the lithium battery pack (LIT-09/LIT-C-8),
(in front of the central sensitivity of the camera’s motion sensor. sold separately.
sensor)
22 External trigger jack 1/8” port which triggers the taking of pho-
7 Light sensor Allows the lighting of the LEDs panel at night. tos or videos using a normally open contact.
8 Cable lock hole Allows the user to install a CL-6FT cable lock. (Example: using a magnetic door contact
9 Tripod mount Standard ¼-20" tripod mount. connected to an alarm system).
23 TV OUT Allows the user to view or delete photos/
10 Slot for installation Allows the user to install the camera using
videos directly on TV.
strap the installation strap included.
11 Power button Press the button to turn on or off the camera.
12 BUSY LED Lights up when the camera is recording.
13 Navigation buttons Buttons to set the camera.
14 Viewing screen Allows the user to access the main menu and
view photos/videos.
15 Microphone Record sound in video mode.
16 Battery switch Allows the user to select the power source
according to the type of batteries used.
6
Components • Receiver (BLACKBOX) TINY
7
Components • Controller (BLACKBOX-D) TINY
1 BUSY LED Lights up when the controller is record.
2 Antenna Allows wireless communication between the
BLACKBOX-D and the camera(s).
3 Viewing screen Allows the user to access the main menu, see
battery level and view photos. Screen with
1
zoom and pan functions.
2
4 SD card slot An SD card is required to record photos.
5 Navigation buttons Buttons to set the controller.
3
6 TV OUT Allows the user to view or delete the photos
directly on a television.
4
7 Battery switch Allows the user to select the power source
5 according to the type of batteries used.
6 8 ON/OFF Allows the user to turn on/off the device.
9 1)12V power jack 1)The controller can be powered from an
7
external 12-volt DC input such as a 12V
8 2)Solar panel jack battery or a 12V adapter, each sold
separately.
8
Power • Camera TINY
The battery level is shown in the REPORT mode (4/4 = full, 1/4= low) and SOLAR PANEL
in the bottom right corner of the screen when the camera is in TEST mode. This camera also offers the possibility to connect a solar panel (SP-12V
When the battery level shows 2/4 or when a single line remains (see figure sold separately) to maintain the charge of the lithium battery pack (sold
below), the camera will continue to take photos but we strongly recommend separately). While installing the rechargeable lithium battery pack, slide the
to change the AA batteries or charge the lithium battery pack before they battery switch to RECH to activate the charging system of the solar panel.
are empty. If a video is being recorded and the batteries level reaches 0%,
the camera saves the file before shutting down. Battery switch position (depending on the power source)
Power source Battery switch position
• 6AA
AA BATTERIES • 12V ALK
This camera requires 6 AA batteries (1.5V). The use of alkaline or lithium • 12V + 6AA
batteries is strongly recommended. During the installation of the AA
batteries, slide the battery switch to ALK (i.e. alkaline). Insert the batteries • LIT-09*
in the removable battery holder as indicated and insert it inside the camera • 12V + LIT-09* RECH
(see figure below). Battery polarity must be followed. • Solar panel + LIT-09*
EXTERNAL (12V)
This camera can also be powered by an external 12-volt DC input such as
a 12-volt battery (KIT-12V, BATT-12V or KIT6V/12V) or a 12-volt adapter
(AD-12V), each sold separately. During the installation of a 12-volt connec-
tion, slide the battery switch to ALK (the AA batteries can remain safely
inside the camera). If combined with a lithium battery pack, slide the bat-
tery switch to RECH. For available accessories, see p.33. 9
Power • Receiver (BLACKBOX) TINY
It is possible to know the battery level of the receiver when it is turned on.
The TEST LIGHT stays on for 8 seconds when the batteries are full. When
the TEST LIGHT flashes for 8 seconds, the batteries are low and need to be
replaced. If the TEST LIGHT remains off, the batteries are completely empty
or are possibly installed in the wrong direction.
AA BATTERIES
The receiver requires 6 AA batteries (1.5V). The use of
alkaline or lithium batteries is strongly recommended.
Insert the batteries as indicated, battery polarity must
be followed.
EXTERNAL (12V)
The receiver can also be powered from an external 12-volt DC input such
as a 12-volt battery (KIT-12V, BATT-12V or KIT6V/12V) or a 12-volt adapter
(AD-12V), each sold separately (p.11). During the installation of a 12- volt
connection, the AA batteries can remain safely inside the receiver.
SOLAR PANEL
The receiver can be powered with a 12-volt battery combined with a solar
panel SP-12V (sold separately) to maintain the charge of the 12-volt battery
(sold separately).
10
Power • Controller (BLACKBOX-D) TINY
The battery level is shown in the top right corner of the screen. When a EXTERNAL (12V)
single line remains, the controller will continue to receive photos but we The controller can also be powered by an external 12-volt DC input such as
strongly recommend to change the AA batteries or charge the lithium bat- a 12-volt battery (KIT-12V, BATT-12V or KIT6V/12V) or a 12-volt adapter
tery pack before they are empty. (AD-12V), each sold separately. During the installation of a 12-volt connec-
tion, slide the battery switch to ALK (the AA batteries can remain safely
AA BATTERIES inside the controller). If combined with a lithium battery pack, slide the
The controller requires 6 AA batteries (1.5V). The use of alkaline or lithium battery switch to LIT-09.
batteries is strongly recommended. During the installation of the AA batte-
ries, slide the battery switch to ALK (i.e. alkaline). Insert the batteries in the
compartment as indicated. Battery polarity must be followed. SOLAR PANEL
The controller also offers the possibility to connect a solar panel (SP-12V
sold separately) to maintain the charge of the lithium battery pack (sold
separately). While installing the rechargeable lithium battery pack, slide the
battery switch to LIT-09 to activate the charging system of the solar panel.
11
Power • Controller (BLACKBOX-D) TINY
TIME BATTERY
Located inside the battery case, the CR2032 lithium button battery saves
the time and date. To replace the battery:
5. Replace the battery, the polarity must be respected (side + facing up).
12
Memory card • Receiver (BLACKBOX) TINY
MEMORY CARD
A memory card is required to operate the BLACKBOX receiver. The receiver
is compatible with SD/SDHC memory cards, up to 32 GB capacity (sold
separately).
When the memory card of the receiver is full, the transmission and recor-
ding of photos continue by clearing the first recorded photos on the memory
card.
4 GB 8 GB 16 GB 32 GB
Photo
3 MP 20500 41000 61500 82000
5 MP 17000 34000 51000 68000
8 MP 12000 24000 36000 48000
13
Memory card/ «BUSY» LED/ Antenna • Camera TINY
MEMORY CARD INSERTING THE MEMORY CARD
A memory card is required to record photos and videos. The camera is Insert an SD/SDHC memory card (up to 32 GB
compatible with SD/SDHC memory cards, up to 32 GB capacity. (sold capacity) in the card slot, gold contacts facing up.
separatel). The card is inserted correctly when a click is heard.
14
Settings • Camera TINY
Use the and buttons to navigate in the interface and modify the selection,
SETTINGS
the OK button to select and the button to return to the previous menu.
Allows the user to change the different settings. To set the system in
English, hold the button until "Language" is highlighted. Press OK, select
PHOTO
"English" with the button or and confirm the choice with OK. The system
Allows the user to take photos. When the PHOTO mode is selected, the
will then change the menus to English.
test light in front of the camera will flash for 60 seconds to allow the user to
leave the area without being photographed.
Camera ID: (TINY-PLUS, TINY-W3)
VIDEO Allows the user to assign a name to the camera (maximum 8 characters).
Allows the user to take videos. When the VIDEO mode is selected, the
test light in front of the camera will flash for 60 seconds to allow the user to
leave the area without being recorded.
Start time/Stop time:
TEST Allows the user to set the operation period of the camera. The start and
Allows the user to test the detection system of the camera. When stop time programmed hours are the hours during which the camera is in
TEST mode is selected, no photo or video is recorded. Walk perpendicu- action and records photos or videos. Example: If the user selects "15:00"
larly in front of the camera. When the camera detects a movement, the start time and "19:00" stop time, the camera will only detect for that
light blinks to indicate that normally, a photo or video would have been period of time and will stay inactive for the remaining hours. Press OK
recorded. If the system does not detect the movement, increase the detection and use or to adjust the hours. Press OK again to set the minutes.
distance using the "Sensitivity" option in the settings menu. Realign the When the time is properly set, press OK.
camera can also be required. In TEST mode, it is possible to take a photo by
pressing the OK button. The photo is saved and appears in the VIEW mode. For a 24 hour activation, the same start and stop times must be entered
(example: 00:00 as start time and 00:00 as stop time. These hours are
INSTALLATION WITH THE SUPPLIED STRAP the basic settings of the camera.
Use the mounting bracket slot for installation strap to fix the camera. The
dimensions of the strap (included) is 1" X 60". Note: The hours are recorded over a 24-hour period. For example, 5pm
is 17:00 (00:00 means midnight).
1. Insérez l’extrémité de la courroie dans la fente 2. Insérez la courroie dans la fente sous le levier 3. Créer une tension sur la courroie en la tirant vers
15
Settings • Camera TINY
Wireless: (TINY-PLUS, TINY-WBF, TINY-W3) 1. Turn OFF the camera.
(On/Off) 2. Press and hold the button and turn ON the camera.
3. "10sec enabled" appears on the screen meaning the minimum delay is
Enables or disables the wireless transmission of photos to the BLACKBOX now 10 seconds. If this option is used, the 30 minute delay disappears.
receiver (TINY-WBF), to the BLACKBOX-D controller (TINY-PLUS, TINY- 4. To reset the camera to 1 minute delay, follow the same procedure.
W3). "10sec disabled" appears on the screen. (see next figure)
Delay:
(10s/1m/3m/5m/10m/15m/30m) Video length:
(10s/30s/60s/90s)
Allows the user to choose the time interval between each detection before
the camera records the next photo or video. A longer delay minimize the Allows the user to select the duration of the recording when the camera
number of photos taken and maximize the battery life. A shorter delay is set in VIDEO mode.
maximize the number of photos taken but requires more battery power.
The shorter times interval are recommended when the cameras is used
for security purposes. Language:
(English/Français/Deutsch/Italiano/Español)
Additional setting:
It is possible to decrease the delay between detections to 10 seconds Allows the user to select a language for the camera menus.
(instead of 1 minute) by using the following procedure.
16
Settings • Camera TINY
Sensitivity: Quality:
(Low/Medium/High) (Low/Medium/High)
Allows the user to choose the detection sensitivity of the camera. A higher Allows the user to set the photo resolution. The low resolution allows the
sensitivity allows the user to take more photos. user to save space on the card and the high resolution allows the user to
get a better photo quality.
The camera will only detect sources of heat in movement. Make sure to
have the least possible objects in front of the camera during the positio- When the quality is set to "High", the video resolution is automatically
ning. This prevents the camera to take photos when oriented towards the set to 1280 x 720 or 640 x 480 (TINY-WBF) and when is set to "Medium"
sun while an object moves in front of the camera (e.g. a branch). or "Low", the video resolution is automatically set to 640 x 480 or 320 x
240 (TINY-WBF).
Date:
Temperature:
Allows the user to set the date as Month/Day/Year. (°C/°F)
Time format:
(12h/24h)
Continuous:
Allows the user to select the time display over a period of 12 or 24 hours (Yes/No)
on the photos. (e.g. 6:00 pm or 18:00)
Allows the user to take photos or videos even if the memory card is full.
The camera will continue to record photos or videos by deleting the first
recorded files.
Time:
Allows the user to set the time as Hour/Minute.
Power:
(Batteries/Electricity)
When the side sensors are activated, a total of 7 zones are covered. The Allows the camera to take photos at regular preset intervals. For example,
central sensor covers 5 zones. The side detectors are mainly used to pre- if the option "5m" is selected in the TIME LAPSE mode, the camera takes
pare the camera so when your target passes through the central sensor, the a photo every 5 minutes during the period of operation (start time and
system is already pre-triggered, increasing greatly the reaction time of your stop time) even if there is no detection. This option allows the user to
camera (ideal when the camera is placed near a narrow trail). obtain photos of game outside the detection range of the camera.
Note: The TIME LAPSE mode only applies in PHOTO mode, not in VIDEO
mode. When TIME LAPSE mode is selected, the DELAY option and the
MULTI-SHOT mode are disabled.
S C S
Camera
18
Settings • Camera TINY
Press OK to view the different options available.
REPORT
The report mode keeps a record of the last period of use of the camera
and indicates the battery level (4/4=full). The beginning date corresponds Play: Allows the user to play or pause the video on the screen.
with the moment the camera is set to either PHOTO or VIDEO mode. Thus, (This option is available only for videos)
the report is reset when changing modes. Date and time: Allows the user to view the date and time printed on
the photo.
Protect: Allows the user to protect a photo or video to prevent it
1. from being deleted by selecting "Delete All".
2. Delete: Allows the user to erase from the memory card, the
3. photo or the video seen on the screen.
4.
Delete all: Allows the user to erase from the memory card all stored
5. photos and videos, with the exception of protected files.
6. Format: Allows the user to format memory card and delete all
7. protected photos and videos.
8.
Exit: Allows the user to exit the menu to return to the viewing
9.
screen.
1. Beginning and end date of the report Note: The number of yellow stars that appear to the right of the screen
2. Number of photos or videos taken during the day corresponds to the resolution of the photos.
3. Number of photos or videos taken at night =Low resolution =Medium resolution =High resolution
4. Total of photos or videos taken
5. Current time of the camera
6. Current date of the camera • Watching on TV:
7. Battery level (1/4 = low, 4/4 = full) Allows the user to view or delete the photos or videos directly on a TV.
8. Remaining space on the SD card estimated by a number of photos
9. Used space on the SD card (total number of files, only includes photos 1. Turn on the camera.
and videos taken by a SPYPOINT camera) 2. Connect the yellow end of the RCA cable supplied into the VIDEO IN of
the TV and the other end into the TV OUT of the camera. The options
are the same as viewing on the screen of the camera (previously men-
VIEW tioned).
Allows the user to view or delete recorded photos and videos on the
camera screen or on a television.
When the controller’s memory card is full, the transmission and recording of
photos continue by clearing the first recorded photos on the memory card.
When the START BLACKBOX option is selected and no memory card is used,
the screen indicates to insert a memory card. The BLACKBOX-D controller
also beeps. When the SD card is full, the screen displays "Memory card full".
4 GB 8 GB 16 GB 32 GB
Photo
3 MP 20500 41000 82000 164000
5 MP 17000 34000 68000 136500
10 MP 9500 19000 38000 76000
20
Setup • Receiver (BLACKBOX) TINY
By default, the TINY-WBF camera is synchronized with its receiver on INSTALLATION WITH THE SUPPLIED STRAP
channel 1 and the icon SYNC is green. (see SIGNAL mode in menu)
Channel 1 + Sync
If the icon of the wireless signal is red, the signal is too weak. Move the
receiver or bring it closer. If the icon of the wireless signal is green and stays
green for at least 10 seconds, the signal is strong and stable enough to
For best results, the antennas of the two devices must also point upwards
enable wireless transmission of photos to the receiver.
and their respective height should be approximately the same (see figure
below).
Note: If the receiver is turn off and not synchronized with the camera, the
signal icon remains red.
SIGNAL
STRENGHT
21
Setup • Receiver (BLACKBOX) TINY
MANUALLY SYNCHRONIZING ONE OR MULTIPLE SETS (TINY-W BF
CAMERA/BLACKBOX RECEIVER) IN THE SAME PERIMETER
To change the synchronization channel or to install one or many sets
(TINY-WBF/BLACKBOX receiver) in the same area of transmission, it is
necessary to manually synchronize each camera with its receiver on a
different channel.
Note: In the minute following turning on the receiver, the test light of the
receiver flashes. The first 8 seconds allows the user to know the battery
status. Then for the rest of the time, the test light flashes rapidly to indi-
cate the synchronization period.
Note: After a synchronization or when the test light turns off (after 60
seconds), the receiver can’t be synchronized unless it is turned off and
on again.
22
Setup • Controller (BLACKBOX-D) TINY
BLACKBOX-D AND CAMERA INSTALLATION MAIN MENU
The strength of the wireless signal varies depending on the orientation of Use the and buttons to navigate in the interface and to modify the
the controller. We strongly recommend installing the controller on the same selection. Use the OK button to select and the BACK button to return to the
side of the camera’s antenna (see figure below). previous menu.
Note: When the controller is left inactive for more than 2 minutes on the
main menu, it automatically resets itself to "START BLACKBOX" mode.
To return to the main screen, turn off the controller and turn it on again.
TREE
SIGNAL STRENGHT
SIGNAL
Allows the user to synchronize a new camera to a BLACKBOX-D con-
troller, see SYNCHRONIZE A NEW CAMERA TO THE CONTROLLER section.
Also allows to add other sets (camera/BLACKBOX-D) in a same area, see
USING MULTIPLE CONTROLLERS IN THE SAME AREA section.
START BLACKBOX-D
Select this option when the controller and camera(s) have been con-
figured and synchronized. The controller is now ready to receive photos
SIGNAL from the synchronized camera(s).
STRENGHT
Note: When this option is selected, the controller screen turns off in order
to preserve battery life. To return to the main screen, turn off the control-
ler and turn it on again.
SETTINGS
INSTALLATION WITH THE SUPPLIED STRAP Allows the user to configure the different parameters of the synchro-
nized cameras.
1. When SETTINGS is selected, the complete list of options in the menu is
displayed. If more than one camera is synchronized to the controller,
choose the one that is to be changed.
2. Make the desired changes and press OK to confirm.
3. Press the BACK button to send the new parameters to the camera.
4. The message "Sending Settings" appears on the screen of the BLACK
BOX-D and the screen of the camera shows "Receiving". The controller
1. Insérez l’extrémité de la courroie dans la fente 2. Insérez la courroie dans la fente sous le levier 3. Créer une tension sur la courroie en la tirant vers returns to the main menu when the changes are successful.
qui se trouve au dos du mécanisme. et faites-la ressortir en arrière. la droite, puis rabattez vers la gauche le levier pour
maintenir la position. 23
Setup • Controller (BLACKBOX-D) TINY
REMOTE VIEW
Allows the user to see the camera status, to start/stop the camera, to Allows the user to view or delete the recorded photos on the controller
verify the quality of the wireless signal and to have an overview of the field screen or on a television.
of view of the camera in real time. If more than one camera is synchronized
to the controller, choose one from those available. • Viewing with the screen of the controller:
When VIEW mode is selected, choose the name of the desired camera and
Get camera status press OK. The last recorded photo automatically appears on the screen.
Indicates the battery level and the percentage of used space in the memory Press f or g to view the next or previous. Press OK to view the different
card of the camera. options available.
Start/stop caméra Date and time: To view the date and time printed on the photo.
Allows the user to remotely stop or restart photos taking. These options can
be used if the user is working in the zone of detection of the camera and he Protect: Allows the user to protect the photo to prevent it from
doesn’t want photos to be taken. When finished, he can remotely restart the being deleted by selecting "Delete All".
camera to continue taking photos. Delete: Allows the user to erase from the memory card, the
photo seen on the screen.
Range test
Delete all: Allows the user to erase from the memory card, all
Allows the user to check the quality of the wireless signal between
stored photos, with the exception of protected photos.
the camera and the controller. If the icon of the wireless signal is
red, the signal is too weak. Bring closer or move the controller. If Format: Allows the user to format memory card and delete all
the icon of the wireless signal is green and stays green for more protected photos.
than 10 seconds, the signal is strong enough and stable to en- Exit: Allows the user to exit the menu to return to the viewing
able wireless transmission of photos to the controller. screen.
Note: The message "Waiting for camera" appears on the screen of the
Press the to enlarge the photo on the screen or to return to the original
BLACKBOX-D if the controller is not synchronized with the camera or if the
size. When the photo is enlarged, press OK to allow movement in the photo.
wrong camera ID is selected.
Then use the navigation buttons to explore different parts of the photo. To
disable the mouvement mode, press OK again.
Note: The number of yellow stars that appear to the right of the screen
Live view
corresponds to the resolution of the photos stored in the BLACKBOX-D.
Allows a live preview of the field of view of the camera in real time (1 photo
per second is sent to the controller). Press the BACK button to return to the =Low résolution =Medium résolution =High résolution
previous menu.
Note: The preview can also be on a TV using the TV-OUT port of the
controller (see View section).
24
Setup • Controller (BLACKBOX-D) TINY
• Watching on TV:
Allows the user to view or delete the photos directly on a TV. Notes:
• It’s possible to synchronize up to 10 cameras to a single controller.
1. Turn on the controller.
• If the name of the camera is changed, it is necessary to resynchronize
2. Connect the yellow end of the RCA cable supplied into the VIDEO IN of
the devices by following the steps in the PREPARING THE CAMERA
the TV and the other end into the TV OUT of the controller. The options
and PREPARING THE CONTROLLER sections.
are the same as viewing on the screen of the controller (previously
mentioned) • The "Reset All" option allows to find the original settings.
• It is possible to easily retrace the BLACKBOX-D controller with a buzzer
signal by pressing the FN button on the RC-1 remote control. The remote
control must be previously synchronized with the camera, which commu-
nicates with the controller. The remote control (sold separately)
is part of the product line compatible with the REMOS technology.
RCA
USING MULTIPLE CONTROLLERS IN THE SAME AREA:
When multiple controllers are installed in the same area of transmission, it
is necessary to manually synchronize each controller with it’s camera(s) in
a different group.
SYNCHRONIZE A NEW CAMERA TO THE CONTROLLER:
To do this:
Preparing the camera:
1. On the controller, select the SIGNAL mode and press OK.
1. Set the name of the camera:
• When SETTINGS is selected, choose "Camera ID" and press OK. 2. Hold down the button for 3 seconds to reach the group option located
• Determine the name of the camera by pressing the or buttons to in the upper right corner of the screen controller and press OK.
change the letter and press OK to go to the next space. 3. Use or buttons to assign a new group to each additional controller
(maximum 5 BLACKBOX-D) and press OK.
2. Continue changing other parameters of the camera as needed. 4. Synchronize the cameras to the new group (follow the steps in the
PREPARING THE CAMERA and PREPARING THE BLACKBOX-D
3. To enable communication with the controller: CONTROLLER sections.
• While still in the SETTINGS menu, select "Wireless" option and press
OK.
• Select "On" and confirm the selection by pressing OK; then on BACK to
return to the previous menu.
4. Select the SIGNAL mode and press OK. The camera searches for the Note: A camera cannot be synchronized to multiple controllers.
controller.
25
Sound recording/ External triggering • Camera TINY
SOUND RECORDING EXTERNAL TRIGGERING
The SPYPOINT camera offers the possibility to record sound in VIDEO 1/8" input which triggers the taking of photos or videos using a normally
mode. When the VIDEO mode is selected, the camera automatically re- open contact.
cords the sound. Under the camera, you will find a rubber cap with the Example: Using a magnetic door contact connected to an alarm system (see
inscription MIC. If the user does not want to record the sound, the rubber figure below). 1/8" Mono connector not included.
cap needs to stay in place. If sound recording is required, the user must
lift the rubber cap and turn it slightly so that the microphone receiver is
completely cleared (See figure below).
26
File transfer to a computer • Camera TINY
To transfer photos/videos to a computer:
USB
3. The computer will detect the camera and install the driver automatically.
4. Click on "My Computer" and select "Removable Disk".
5. Then click on "DCIM" and "100DSCIM" to find all your photos and videos.
6. Drag or save the files to the desired location.
Taking the memory card (sold separately) out of the camera and inserting it
into the computer slot will achieve the same results.
27
File transfer to a computer •
Receiver (BLACKBOX)/ Controller (BLACKBOX-D) TINY
To transfer photos to a computer, remove the memory card (sold separa-
tely) out of the receiver or the controller and insert it into the computer slot.
1. Click on "My Computer" and select "Removable Disk".
MEMORY CARD
2. Then click on "DCIM" and "100DSCIM" to find all the recorded photos.
3. Drag or save the files to the desired location.
The names of the photos recorded by the camera and the BLACKBOX-D
controller start by PICT while those stored in the BLACKBOX receiver starts
by PICW. The BLACKBOX-D controller creates a folder for each synchro-
nized camera and automatically class photos to different folder.
28
Troubleshooting • Camera TINY
Problem Possible solutions No person/animal • Sunrise or sunset can trigger the sensor. Camera
Impossible to • Verify if there are batteries in the camera. on photos must be re-orientated.
turn on the • Verify if the batteries are correctly installed. • At night, the motion detector may detect beyond the
camera • Verify if the battery switch position is positioned range of the IR illumination. Reduce sensibility
according to the power source. setting.
• Install the latest update (available on www.spypoint. • Small animals may trigger the unit. Reduce sensibi-
com under SUPPORT section). lity setting and/or raise height of camera.
• Replace alkaline batteries or recharge the lithium • Motion detector may detect animals through foliage.
battery pack. • If a person or animal moves quickly, it may move out
of the camera’s field of view before the photo is
The screen of the • The camera may be set to PHOTO or VIDEO mode taken. Move the camera further back or redirect the
camera turns off and the screen turns off after a period of 60 seconds camera.
in order to preserve battery life. • Make sure the mounting post or tree is stable and
• The camera automatically resets itself to PHOTO or does not move.
VIDEO mode (depending of the latest mode used
or selected) after 2 minutes of inactivity on the main Red light in front • Camera is set in TEST mode.
menu. of the camera • Camera is set in PHOTO or VIDEO mode. The red
• To return to the screen, turn off the camera and turn blinks light in front of the camera flashes for 60 seconds to
it on again. allow the user to leave without being photographed
or recorded.
The camera beeps • Insert a memory card.
The photos/ • Verify if the camera is correctly connected to the
The camera does • Remove the batteries and reinstall them. videos do not television using the RCA cable.
not respond • Replace alkaline batteries or recharge the lithium appear on the • Verify if the memory card contains photos/videos.
battery pack. television
The camera • The time battery must be replaced. The computer • Verify if the camera is properly connected to the
works, but is does not computer using the USB cable.
losing its time recognize the
and date settings camera
Impossible to • Verify if there are batteries in the camera. The computer • The .MP4 video format requires the use of a video
take photos/ • Replace alkaline batteries or recharge the lithium can’t play videos player software compatible such as VLC, Windows
videos battery pack. Media Player or QuickTime.
• Memory card is full.
• Verify if the camera is turned on.
29
Error messages • Camera TINY
Error message Possible solutions
Insert memory The use of a memory card is required to record photos
card and videos.
• Delete the files or use a new memory card.
Memory card full • Afterwards, the "Continuous" option can be activated
for a continuous recording.
The camera cannot access the memory card.
• Turn off the camera and turn it on again
Card error • Remove the memory card and insert it again.
• Verify if the gold contacts are clean.
• Format the memory card.
Appears on the screen just before the camera turns
Low battery off. Recharge the batteries or insert new ones. Always
verify the battery level before using the camera.
There are no files to view. Verify if the memory card
No image
contains photos/videos.
It is impossible to delete the file because it is protected.
Protected file To delete this file and all the others, just format the
memory card.
30
Troubleshooting • Receiver (BLACKBOX) TINY
Problem Possible solutions
Impossible • Verify if there are batteries in the receiver.
to turn on the • Verify if the batteries are correctly installed.
receiver • Replace alkaline batteries.
The photos are • Synchronise together the BLACKBOX and the camera
not transferred to before use.
the BLACKBOX • Verify the quality of the wireless signal with the
option "Range Test".
• Observe the maximum distance between the receiver
and the camera (250 ft).
• Install the latest update available for the receiver
and the camera (available on www.spypoint.com
under SUPPORT section).
The BLACKBOX • Bring closer the 2 devices.
receiver does • Install the latest update available for the receiver
not synchronize and the camera (available on www.spypoint.com
with the TINY-WBF under SUPPORT section).
camera
The range test • Verify if the receiver is turned on.
of wireless signal • Synchronise together the BLACKBOX and the camera
does not work before use.
• Bring closer the 2 devices.
• Verify if the two antennas (BLACKBOX and camera)
are pointing up and they are placed approximately at
the same height.
• Install the receiver on the same side of the camera’s
antenna to have a stronger signal.
The device takes • Verify if the cover is tightly closed.
water • Verify if the rubber ring is correctly installed.
• Clean the rubber ring.
31
Troubleshooting/ Error messages • Controller (BLACKBOX-D) TINY
TROUBLESHOOTING ERROR MESSAGES
POWER
Rechargeable 12V battery, Solar panel
charger & housing kit #SP-12V, Solar panel with adjus-
#KIT-12V, 12-volt 7.0Ah rechar- table steel mounting kit. Maintains
geable battery with a water resis- the charge of the lithium battery
tant ABS plastic case, AC charger, pack directly into compatible de-
12V DC Power cable Lithium battery pack & charger 12 ft power cable (#PW-12FT) and vices. Can also be combined with
#CB-12FT, 12 ft power cable with #LIT-C-8, Rechargeable lithium carrying strap included. Compa- any 12-volt battery. 9 ft power
alligator clips at one end to connect battery pack and AC charger with tible with all SPYPOINT products cable.
a 12V battery to a camera. charge indicator light. Fits most equipped with a 12V power jack.
SPYPOINT products.
Cable lock
Camera mount
#CL-6FT, 6 ft cable lock fits all
#MA-360, Adjustable mounting
SPYPOINT cameras.
arm, fits all cameras that have a
standard ¼-20" tripod mount. It
can rotate 360° and tilt approx +/-
90°. Also available in black.
34
Available accessories • Receiver (BLACKBOX) TINY
To obtain more information on the available accessories, go to
www.spypoint.com. Here are the main accessories available:
POWER
Solar panel
#SP-12V, Solar panel with adjus-
table steel mounting kit. Maintains
the charge of the lithium battery
pack directly into compatible de-
vices. Can also be combined with
12V DC Power cable Rechargeable 12V battery & any 12-volt battery. 9 ft power
#CB-12FT, 12 ft power cable with charger set cable.
alligator clips at one end to connect #BATT-12V, 12-volt 7.0Ah rechar-
a 12V battery to the receiver. geable battery and AC charger to
power the receiver.
MEMORY CARD
12-volt Adaptor
Rechargeable 12V battery,
#AD-12V, AC adaptor (6V to 12V).
charger & housing kit
Powers the receiver from an elec-
#KIT-12V, 12-volt 7.0Ah rechar-
trical outlet.
geable battery with a water resis-
tant ABS plastic case, AC charger, SD Memory card 8GB SD Memory card 16GB
12 ft power cable (#PW-12FT) and #SD-8GB, SDHC memory card #SD-16GB, SDHC UHS-1 memory
carrying strap included. Compa- 8 GB, High speed Class 6. card 16 GB, ultra high speed Class
tible with all SPYPOINT products 10.
equipped with a 12V power jack.
Universal power kit
#KIT6V-12V, Universal kit with 6
volts or 12 volts output. Compa-
tible with all SPYPOINT products or
any other products equipped with
a 6 volts or 12 volts power jack. 6
connectors included to fit any de-
vice. Includes 6 volts (5.6Ah) and Spare power cable
12 volts (2.8Ah) output configura- #PW-12FT, Spare 12 ft power
tion and AC charger. cable, to connect the receiver to
the KIT-12V.
35
Available accessories • Receiver (BLACKBOX-D) TINY
To obtain more information on the available accessories, go to
www.spypoint.com. Here are the main accessories available:
POWER
Rechargeable 12V battery, Solar panel
charger & housing kit #SP-12V, Solar panel with adjus-
#KIT-12V, 12-volt 7.0Ah rechar- table steel mounting kit. Maintains
geable battery with a water resis- the charge of the lithium battery
tant ABS plastic case, AC charger, pack directly into compatible de-
12V DC Power cable Lithium battery pack & charger 12 ft power cable (#PW-12FT) and vices. Can also be combined with
#CB-12FT, 12 ft power cable with #LIT-C-8, Rechargeable lithium carrying strap included. Compa- any 12-volt battery. 9 ft power
alligator clips at one end to connect battery pack and AC charger with tible with all SPYPOINT products cable.
a 12V battery to a controller. charge indicator light. Fits most equipped with a 12V power jack.
SPYPOINT products.
Capture mode Color by day, black and white by night Electricity option Instant trigger time
(*Connection to an electrical outlet
Audio only)
Sound recording Mono External trigger 1/8" jack for normally open contact
(automatically recorded in video
mode) Night time illumination system
37
Specifications (TINY-W3)
BLACKBOX-D CONTROLLER
Memory storage
Support • Internal memory : none
• External memory : SD/SDHC card
(up to 32 GB)
Viewing
Built-in screen 2.4" LCD
TV output Composite video (PAL/NTSC)
Power source
Accessories sold separately, p.36
Alkaline or lithium batteries 6 x AA
Lithium battery pack Rechargeable battery pack
(LIT-09/LIT-C-8)
External (12V jack) 12V battery (KIT6V-12V, KIT-12V, BATT-
12V) or 12V adapter (AD-12V)
Solar panel Solar panel (SP-12V) combined with
rechargeable battery pack (LIT-09/
LIT/C-8)
Dimensions
3.9" W x 4.7" H x 1.9" D
Wireless
Wireless range Maximum 500 ft (150 m) from camera
to BLACKBOX-D controller
(supplied with TINY-W3)
Recommendations
Operating temperature (-30 °C to + 50 °C) (-22 °F to +122 °F)
Storage temperature (-40 °C to + 60 °C) (-40 °F to +140 °F)
38
Specifications (TINY-WBF)
CAMERA
Photo recording Solar panel Solar panel (SP-12V) combined with
rechargeable battery pack (LIT-09/
Photo resolution 3 MP, 5 MP, 8 MP
LIT/C-8)
File format JPG
Detection system
Time lapse mode Predefined intervals from 30 s to 1 h
Motion sensor PIR
Multi-shot mode Up to 6 photos per detection
Detection angle of the main 30°
Stamp (only on photos) Date, time, temperature (°C/°F) and sensor
moon phase
Detection angle of the side 70°
Capture mode Color by day, black and white by night sensors
Video recording Detection range Adjustable from 5 to 65 ft
Video resolution 320 x 240, 640 x 480 Delay between each detection Adjustable from 1 to 30 min
File format AVI *Additional 10 s setting
Sequence length Adjustable from 10 to 90 s Electricity option Instant trigger time
(*Connection to an electrical outlet
Capture mode Color by day, black and white by night only)
Audio External trigger 1/8" jack for normally open contact
Sound recording Mono Night time illumination system
(Automatically recorded in video
mode) LEDs 38 LEDs
Memory storage Exposure Automatic infrared level adjustment
Support • Internal memory : none Optical field of view
• External memory : SD/SDHC card 40°
(up to 32 GB)
Dimensions
Viewing
4.7" W x 3.5" H x 2.7" D
Built-in screen 2.4" LCD
Wireless
TV output Composite video (PAL/NTSC)
Wireless range Maximum 250 ft
Computer output USB 2.0
Recommendations
Power source
Operating temperature (-30 °C to + 50 °C) (-22 °F to +122 °F)
Accessories sold separately, p.33
Storage temperature (-40 °C to + 60 °C) (-40 °F to +140 °F)
Alkaline or lithium batteries 6 x AA
Lithium battery pack Rechargeable battery pack
(LIT-09/LIT-C-8)
External (12V jack) 12V battery (KIT6V-12V, KIT-12V, BATT-
12V) or 12V adapter (AD-12V)
39
Specifications (TINY-WBF)
BLACKBOX RECEIVER
Memory storage
Support • Internal memory : none
• External memory : SD/SDHC card
(up to 32 GB)
Power source
Accessories sold separately, p.35
Alkaline or lithium batteries 6 x AA
External (12V jack) 12V battery (KIT6V-12V, KIT-12V, BATT-
12V) or 12V adapter (AD-12V)
Dimensions
2.7" W x 3.5" H x 2.7" D
40
Specifications (TINY-PLUS)
Capture mode Color by day, black and white by night Electricity option Instant trigger time
(*Connection to an electrical outlet
Audio only)
Sound recording Mono External trigger 1/8" jack for normally open contact
(Automatically recorded in video
mode) Night time illumination system
41
Specifications (TINY-7)
Capture mode Color by day, black and white by night Electricity option Instant trigger time
(Connection to an electrical outlet
Audio only)
Sound recording Mono External trigger 1/8" jack for normally open contact
(Automatically recorded in video
mode) Night time illumination system
42
Regulation
FCC REGULATIONS
FCC Part l5
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the Federal
Communications Commission (FCC) rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequen-
cy energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there
is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of
the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications to this equipment not expressly approved by the
party responsible for compliance could void the user’s authority to operate
the equipment.This device complies with Part 15 of the FCC rules. Operation
is subject to the following two conditions: (1) this device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
43
Limited warranty and repair
This SPYPOINT product designed by GG Telecom, is covered by a one (1) INSTRUCTIONS FOR REPAIR SERVICE
year warranty on material and workmanship starting from the original date GG Telecom will repair the product without charge or replace it at its discre-
of purchase. The sales receipt is the client’s proof of purchase and must be tion with an equivalent product, if it has a manufacturing defect covered by
presented if warranty service is needed. This warranty will be honored in the the warranty described previously. GG Telecom will pay the shipping costs
country of purchase only. only for the return of the products covered by the warranty. The shipping
costs for an item sent will be assumed by the customer.
This GG Telecom warranty does not apply: (a) to consumable parts, inclu-
ding but not limited to batteries, which performance is designed to decrease Repairs for damages not covered by the warranty will be subject to a
over the course of time; (b) to damage caused by misuse, use with another reasonable charge. The customer will pay all shipping costs.
product, neglect, accidents, liquid contact, fire, earthquake or any other ex-
ternal cause; (c) to GG Telecom products that have been purchased online 1. BEFORE sending a product for repair, the costumer is welcomed
from an unauthorized dealer; (d) to products that have had any modification to contact GG Telecom technical support team at 1-888-779-7646
or tampering; (e) to cosmetic damage including but not limited to scratches or tech@spypoint.com and to clearly describe the problem and give
and broken plastic; (f) to damage caused by operating the GG Telecom pro- a phone number where she or he can be reached. It happens
duct outside of GG Telecom’s recommendations. regularly that some problems can be solved over the phone.
2. If a product needs to be sent, an RMA number will be given to the
customer (Return Merchandise Authorization).
3. The original receipt or a copy must be sent along with the
package.
4. The RMA number must be written on the outside of the package
and sent to:
The customer is liable for loss or damage to the product that may occur
during the transport to GG Telecom. We recommend the use of a traceable
method of shipping to ensure protection.
WWW.SPYPOINT.COM
44