Professional Documents
Culture Documents
Initial Controller Setting
Initial Controller Setting
Resetting Procedures
[1] If the auto mode switch is pressed down for another 10 seconds after the verifying state described in
Verifying the Settings, a buzzer will sound continuously.
Because the starter switch is turned OFF, the settings are all cleared. Now the controller is ready for
resetting. (By pressing the auto mode switch for a shorter period of time (less than10 seconds) while
settings are displayed, display will switch to normal.)
Setting Procedures
[1] When the starter switch is turned on after resetting the controller, the following will be displayed on the
LCD screen on the monitor.
[2] By utilizing the travel mode switch, work mode switch and the auto mode switch on the monitor, select
the MACHINE, the TERRITORY and the LANGUAGE
1) Each time the work mode switch is pressed, the items alternate between MACHINE, TERRITORY
and LANGUAGE. (The selected item will be highlighted.)
2) Each time the travel mode switch is pressed, the individual setting in each item switches.
If MACHINE is selected, for example, the display will change as follows: SH300-4→SH400-
4→SH700-4→SH800-4→SH300-4...
When TERRITORY is selected, the display will switch as follows: 0→1→2→3→4→0... (0: for use
inside Japan)
When LANGUAGE is selected, the display will switch as follows: 0→1→2→...13→14→0→1... (0:
Japanese).
212
700-1-04-05-07
Electric Circuits Page No. 2/ 3
INITIAL CONTROLLER SETTINGS Second Edition:02/2006
3) As the auto mode switch is pressed after the three items are reset, the settings are saved. Now the
resetting is complete and the display goes back to normal. (If set for domestic use in Japan, for ex-
ample, the display shows bar graphs after displaying PAX logo for 3 seconds.)
Once the MACHINE setting is complete, the machine does not display the screen for this setting any
more. The machine will start in normal display screen from the next time it is turned on.
List of Settings
MACHINE : SH300-4
: SH400-4
: SH700-4
: SH800-4
TERRITORY : 0........ SUMITOMO
: 1........ LBX
: 2........ CASE (North America)
: 3........ CASE (Europe)
: 4........ No Brand
LANGUAGE : 0........ Japanese
: 1........ English
: 2........ Thai
: 3........ Chinese
: 4........ German
: 5........ French
: 6........ Italian
: 7........ Spanish
: 8........ Portuguese
: 9........ Dutch
: 10...... Danish
: 11...... Norwegian
: 12...... Swedish
: 13...... Finnish
: 14...... Pictographs only
[2] In this screen, depression of travel mode switch allows "LANGUAGE" only to be switched in the or-
der of such as 1 → 2 → 3...
[3] Select the required language and depress the work mode switch to complete the setting.
213
700-1-04-05-07
Electric Circuits Page No. 3/ 3
INITIAL CONTROLLER SETTINGS Second Edition:02/2006
(*1): When key is turned OFF with auto mode selected, the next starts in "AUTO" mode.
When key is turned OFF with HSL selected, the next starts in "S" mode.
(*2): "I" is displayed on the monitor.
Note: For auto idling and one-touch idling, previous data are to be held.
214