Professional Documents
Culture Documents
S-Link: S-LINK Transmits 128 Points On Two Signal Lines, and "T"-Branch Multi-Drop System Enabling Flexible Cable Layout
S-Link: S-LINK Transmits 128 Points On Two Signal Lines, and "T"-Branch Multi-Drop System Enabling Flexible Cable Layout
1033
S-LINK
FIBER
SENSORS
Related Information ■■General terms and conditions.............. F-7
LASER
SENSORS
PHOTOELECTRIC
SENSORS Conforming to
EMC Directive
MICRO (Excluding some models)
PHOTOELECTRIC
SENSORS
AREA
SENSORS
LIGHT CURTAINS /
SAFETY
COMPONENTS
PRESSURE /
FLOW
SENSORS
INDUCTIVE
PROXIMITY
SENSORS
PARTICULAR
USE SENSORS
SENSOR
OPTIONS
SIMPLE
WIRE-SAVING
UNITS
WIRE-SAVING
SYSTEMS This product is introduced to only
limited countries. Please contact
MEASUREMENT
SENSORS panasonic.net/id/pidsx/global our office for details.
STATIC ELECTRICITY
PREVENTION
DEVICES
LASER
MARKERS
S-LINK transmits 128 points on two signal lines,
PLC
and “T”-branch multi-drop system enabling flexible cable layout
HUMAN MACHINE
INTERFACES We’ve realized a wire-saving system that’s easy to use
ENERGY CONSUMPTION
VISUALIZATION
COMPONENTS
FA COMPONENTS
Remote I/O S-LINK
Just with the wire-saving between Allows for great wire-saving for all
MACHINE VISION the PLC and the sub-stations, connections. Installation is made
SYSTEMS
you’ll be able to save a mountain easy with no faulty wiring. The
The remote I/O is The S-LINK is
UV CURING of I/O device connection wires. one-dimensional power supply line can also be
two-dimensional
SYSTEMS
wiring wired up together enabling wiring
true wire-saving
for I/O devices.
For Large
Scale Systems
For Medium
Scale Systems
S-LINK
Transmission distance:
200 m 656.168 ft (400 m 1312.336 ft when using booster)
Total wiring length:
400 m 1312.336 ft (800 m 2624.672 ft when using one booster)
Connectable I/O: 128 points
( The maximum number of sub-stations which
can be connected: 128 nodes )
Sensor & Wire-saving Link System S-LINK
1034
PLC
Simple and reliable connections
HUMAN MACHINE
INTERFACES
We’ve provided all types of hook-up connectors. Connections from S-LINK I/O devices to the main cable and from
ENERGY CONSUMPTION
sensors and other devices to S-LINK I/O devices are all realized with one-touch hook-up connectors. They can be VISUALIZATION
connected anywhere quickly and maintenance is easy. COMPONENTS
FA COMPONENTS
Branch cable to main cable connection and S-LINK I/O device to main cable connection Connection from various connected units to S-LINK I/O devices
MACHINE VISION
* The values in ( ) represent conductor cross-section areas. * The values in ( ) represent conductor cross-section areas. SYSTEMS
SL-J1A SL-CP1 (0.08 to 0.2 mm2) SL-CJ1 (0.08 to 0.2 mm2) UV CURING
SL-CP2 (0.3 mm2) SL-CJ2 (0.3 mm2) SYSTEMS
SL-CP3 (0.5 mm2)
4
3
2
4
3
5
2
6
1
7
2
8
For Large
SL-T8J Scale Systems
SL-BMJ For Medium
In addition, to enhance the reliability of the crimping, Scale Systems
S-LINK exclusive pliers are made available so that Connected device extensions
anyone can do it with ease. S-LINK
* The values in ( ) represent conductor cross-section areas.
4-pin type 2-pin type
PARTICULAR
USE SENSORS
SENSOR
OPTIONS
Mid-system main / branch cable installation and removal possible
SIMPLE
WIRE-SAVING
UNITS For conveyors or other large scale equipment, transport can also be done after dividing the whole into units of several
WIRE-SAVING
meters in length right at the factory. Then, reassembly and wiring can be effectuated onsite afterwards. Because the
SYSTEMS S-LINK can be easily divided even from mid-system main / branch cables with the help of commercially available
connectors and terminals, the segmented equipment can be wired up prior to transport. Once onsite, assembly work
MEASUREMENT
SENSORS is all but complete with just the connecting of the individual units to each other.
STATIC ELECTRICITY In addition, when assembling the equipment, the S-LINK can work even disconnected from the PLC enabling
PREVENTION software (PLC programming) and hardware (machine assembly, I/O check) work to be done concurrently, which
DEVICES
results in quick delivery time. With the handy monitor, I/O devices can be checked for each piece of equipment
LASER
MARKERS
separately enabling subcontractors to conduct check work on delivery. This results in a total delivery deadline
reduction and clearly defined subcontractor responsibilities. Also, checking can be performed even without
PLC programming so you’ll know immediately if malfunctions are coming from the PLC or the S-LINK.
HUMAN MACHINE
INTERFACES
Dividing equipment into subunits possible
ENERGY CONSUMPTION Equipment 4
VISUALIZATION S-LINK
COMPONENTS I/O device
FA COMPONENTS S-LINK
controller
MACHINE VISION Commercially
Equipment 1 Equipment 2 Equipment 3
SYSTEMS available connectors
UV CURING
SYSTEMS
For Large
Scale Systems
For Medium
Scale Systems
Checking
S-LINK inputs / outputs
is easy.
Handy monitor
SL-HM1
Sensor & Wire-saving Link System S-LINK
1036
Total cost reductions and great savings in setup time Auxiliary materials reduced FIBER
SENSORS
By introducing the S-LINK, you can reduce the total cost Great reductions in auxiliary materials such as cable LASER
of system construction to one-fifth. Total costs including racks, cable ducts, intermediate terminal blocks, and SENSORS
for materials go down dramatically and, by decreasing cables. This system also contributes greatly to the PHOTOELECTRIC
the workload, construction time is lessened which means reduction waste caused by cutting cable ends. SENSORS
you can easily meet that tough deadline. MICRO
The S-LINK system: PHOTOELECTRIC
SENSORS
● A hardware-only construction makes layout design
AREA
simple SENSORS
● With hook-up connectors, construction time is greatly LIGHT CURTAINS /
reduced SAFETY
COMPONENTS
● Layout modifications made easy PRESSURE /
● Equipment divided into separate segments make for FLOW
SENSORS
easy debugging INDUCTIVE
● Segmented equipment can be easily interlinked with PROXIMITY
Space-saving SENSORS
commercially available connectors PARTICULAR
Because of great reductions in the amount of USE SENSORS
intermediate terminal blocks and cables needed, you
Conventional SENSOR
can save space and minimize the size of your control OPTIONS
Design Construction Debug Shipment and setup board and machines. SIMPLE
This will finally let you put all that wasted space to good WIRE-SAVING
UNITS
use.
Design Construction Debug Shipment and setup WIRE-SAVING
SYSTEMS
S-LINK Construction time
MEASUREMENT
greatly reduced SENSORS
The control box STATIC ELECTRICITY
can be of smaller size PREVENTION
DEVICES
LASER
MARKERS
PLC
HUMAN MACHINE
INTERFACES
ENERGY CONSUMPTION
VISUALIZATION
COMPONENTS
Upper-level network connection possible FA COMPONENTS
Because it can be connected to any main open network, long-distance and multi-point transmission networks can MACHINE VISION
be constructed enabling a greatly enhanced network upgrade. Also, by wiring up scattered bit-oriented I/O devices SYSTEMS
that include mostly connected sensors and switches, an efficient wire-saving layout can be realized. If exporting UV CURING
equipment that was setup with any open network, it can be made to correspond to different networks just by installing SYSTEMS
an S-LINK gateway controller with the entire S-LINK system left as it is.
For Large
AD
DR
F
OF K.
ES
S
Scale Systems
For Medium
CH
ON B0 T
N B1~ 31 OU
RUS. 0 63
SYD. 32~ 95
AD 64~ 127
96~F
Scale Systems
IN OF
AT. T
ST SE
ND
SE
BK
1
ER BU
I.
CC-Link
3 SH
ER
WH
4
ER RD
1
0
DeviceNet
32
B 16
24
TE
8
0
4
D 2
ID 1
G
S-LINK
A F
24 OF
0
ON
24
0
R
LLE
TRO
Y CON
-D
U1
EWA
GAT
-G
NK
S-LI AN
SL
JAP
05
N8Q
S-LINK gateway
controller
1037 Sensor & Wire-saving Link System S-LINK
FIBER APPLICATIONS
SENSORS
LASER
SENSORS
Distributed installation
MEASUREMENT
SENSORS Easy hook-up
STATIC ELECTRICITY
PREVENTION
DEVICES
LASER
MARKERS
PLC
HUMAN MACHINE
INTERFACES
ENERGY CONSUMPTION
VISUALIZATION
COMPONENTS
UV CURING
12
SYSTEMS 34
12
34
12 12
34
Personal computer 34
Sensor
12
For Large 34
Scale Systems Sensor
For Medium 12
Scale Systems 34
Sensor
S-LINK Sensor
APPLICATIONS FIBER
SENSORS
SENSOR
OPTIONS
SIMPLE
WIRE-SAVING
UNITS
WIRE-SAVING
SYSTEMS
MEASUREMENT
SENSORS
STATIC ELECTRICITY
The wire-saving system is being greatly emphasized even for The wiring of I/O devices mounted on a rotating board PREVENTION
DEVICES
assembly lines crowded with multiple I/O devices. (turntable) used to be quite a difficult task. Because a slip ring
Also, to enhance productivity, using a wire-saving system is the with the same number of terminals as wires had to be used. LASER
MARKERS
key to reliability and avoiding the occurrence of troubles. Therefore, there have been difficulties such as employing a
In the S-LINK loop wiring, the system maintains signal large slip ring or reduction of I/O point count.
PLC
transmission even when the loop may break at any one place. S-LINK enables the connection of up to 128 I/O points on a
Also, the controller displays disconnected unit address. Further, 4-pole slip ring. A compact slip ring can be used without
HUMAN MACHINE
when excess current flows or short-circuit occurs in the signal worrying about I/O points. INTERFACES
transmission lines, the signal transmission is stopped to protect
ENERGY CONSUMPTION
the system. VISUALIZATION
S-LINK is a wire-saving system optimal for the automatic COMPONENTS
assembly machinery.
FA COMPONENTS
MACHINE VISION
SYSTEMS
Handler Parts picking system
UV CURING
SYSTEMS
For Large
Scale Systems
For Medium
Scale Systems
S-LINK
“The handler” as the IC test equipment uses multiple sensors. Many small picking sensors are employed in the parts picking
Cost reduction or downsizing depends on how to reduce these system in order to verify the correct selection of components.
wires and to save space. The number of input points is required as much as the number
S-LINK realizes wire-saving and space-saving; hence these of shelves, the number of output points is also required to be
problems are solved all at once. the same in adopting the operational indicators.
S-LINK system greatly contributes to wire-saving both in I/O
points and in space. Also, extra shelves can be added easily.
1039 Sensor & Wire-saving Link System S-LINK
LASER
SENSORS
Upper-level control devices S-LINK control components
PHOTOELECTRIC
SENSORS
MICRO
PHOTOELECTRIC PLC PLC I/O connectors Multi-core cable PLC I/O units S-LINK controller Booster
SENSORS (for connectable PLC) (for screw-on terminal type PLC) SL-CU1A SL-BS1A
SL-S□, SL-P□ SL-S, SL-SP, SL-P, SL-PP
AREA
SENSORS
LIGHT CURTAINS /
SAFETY
COMPONENTS
PRESSURE /
FLOW
SENSORS
INDUCTIVE
PROXIMITY
SENSORS
PARTICULAR
USE SENSORS
SENSOR S-LINK controller for direct connection to PLC bus / S-LINK control boards
OPTIONS
PLC
(Direct connection to PLC bus) For Mitsubishi Electric Corp. For Yokogawa Electric Corp.
FPΣ FP0 S-LINK FP2SH
SIMPLE PLC MELSEC-Q series PLC FA-M3 series
WIRE-SAVING S-LINK unit Control unit S-LINK unit
UNITS FPG-SL FP0-SL1 FP2-SL2 SL-MEL-Q SL-FAM3
WIRE-SAVING
SYSTEMS
MEASUREMENT
SENSORS
STATIC ELECTRICITY
PREVENTION
DEVICES Items offered by partner makers
LASER Controllers manufactured by
MARKERS JTEKT Corp.
THU-5291
PLC
HUMAN MACHINE
INTERFACES
ENERGY CONSUMPTION
VISUALIZATION For PC/104 bus SL-PC104
COMPONENTS Personal computers For ISA bus SL-PCAT
FA COMPONENTS
MACHINE VISION
SYSTEMS
UV CURING
SYSTEMS
S-LINK
Sensor & Wire-saving Link System S-LINK
1040
LASER
SENSORS
S-LINK I/O devices
PHOTOELECTRIC
SENSORS
MICRO
1 • 2 channel I/O unit 8 channel snap-connector I/O unit For e-con 8 channel snap-connector I/O unit 16 channel MIL connector I/O unit PHOTOELECTRIC
SL-CH□(-PN) SL-T8J(-PN), SL-TP8J(-PN) SL-T8E(-PN), SL-TP8E(-PN) SL-T16C1(-PN), SL-TP16C1(-PN) SENSORS
AREA
SENSORS
LIGHT CURTAINS /
SAFETY
COMPONENTS
PRESSURE /
FLOW
SENSORS
INDUCTIVE
PROXIMITY
SENSORS
PARTICULAR
USE SENSORS
8-branch connector tap I/O arrayed terminal unit Relay output terminal unit Snap-connector sensor block SENSOR
SL-T8PW SL-TB□(-PN), SL-TBP□(-PN) SL-TPR4, SL-TPR8 SL-BMJ, SL-BXJ OPTIONS
SL-TBP□-TY
SIMPLE
WIRE-SAVING
UNITS
WIRE-SAVING
SYSTEMS
MEASUREMENT
SENSORS
STATIC ELECTRICITY
4, 8 or 16 inputs PREVENTION
4, 8 or 16 outputs DEVICES
LASER
MARKERS
Plug-in unit sensor block S-LINK direct hook-up S-LINK direct hook-up Picking switch
SL-BM, SL-BX photoelectric sensor picking sensor SL-PK01
SL-A□ SL-N15 PLC
HUMAN MACHINE
INTERFACES
ENERGY CONSUMPTION
VISUALIZATION
COMPONENTS
FA COMPONENTS
MACHINE VISION
SYSTEMS
UV CURING
Items offered by partner makers SYSTEMS
Manifold electromagnetic valve Manifold electromagnetic valve Manifold electromagnetic valve Component indicator lamp
manufactured by Koganei Corp. manufactured by SMC Pneumatics manufactured by CKD Corp. manufactured by Yazaki
Industrial Chemical Co., Ltd.
For Large
Scale Systems
For Medium
Scale Systems
S-LINK
Plug-in units (for SL-BM, SL-BX)
LASER
SENSORS
Connectors and cables
PHOTOELECTRIC
SENSORS
MICRO
PHOTOELECTRIC SL-TPR4 SL-T8PW
SENSORS SL-J1A [“T”-branch 4-core flat cables]
SL-TPR8
AREA SL-CH□ (-PN) SL-T8J (-PN)
SENSORS SL-TP8J (-PN) SL-CP1,SL-CP2 or SL-CP3
LIGHT CURTAINS / SL-T16C1 (-PN) Connect a thru-beam type photoelectric sensor
SAFETY SL-TP16C1 emitter or an S-LINK I/O device to the SL-T8PW
COMPONENTS
PRESSURE /
FLOW SL-JK1 “T”-branch an S-LINK I/O device fitted with either a
SENSORS 0.3 mm2 cabtyre cable or a flat cable to the main or SL-TPR4
INDUCTIVE MIL connector branch cable in mid-system SL-TPR8
PROXIMITY
SENSORS SL-CP2
or
PARTICULAR SL-CP3
SL-BM
USE SENSORS
SL-N15
1
2
SL-A□
3
4
PLC SL-RCM100
SL-RCM200
SL-JK1
[S-LINK exclusive 4-core flat cable]
HUMAN MACHINE
INTERFACES SL-A□ SL-CP1,SL-CP2
or SL-CP3
ENERGY CONSUMPTION [2-wire device cable extension]
VISUALIZATION SL-CP2 SL-JK
2-wire device
COMPONENTS
SL-CP1,SL-CP2 or SL-CP3
SL-CJ2
SL-CP1□
FA COMPONENTS [Cable extension] [Connect an I/O device to the SL-CH2□(-PN)]
1
2
SL-CJ1□
MACHINE VISION
SYSTEMS SL-JK Connection S-LINK I/O device fitted with either a 0.3 mm2 cabtyre
cable or a flat cable to the main or branch cable end-terminal SL-JE
To S-LINK input unit
UV CURING SL-CP2
or
SYSTEMS SL-CP3 [For main cable terminal]
SL-BM
SL-A□ SL-N15
SL-BMJ SL-TB□(-PN)
SL-TBP□(-PN)
For Large SL-TBP□-TY
Scale Systems
For Medium [For main cable end terminal]
Scale Systems
(When using a cabtyre cable)
SL-T8J(-PN) SL-TPR4
S-LINK SL-TP8J(-PN) SL-TPR8 SL-PK01
SL-JE-RC
LASER
S-LINK control units SENSORS
PHOTO-
ELECTRIC
Designation Appearance (Note) Model No. Description SENSORS
MICRO
PHOTO-
ELECTRIC
SENSORS
It supplies the synchronization signal to the complete system to send and receive I/O data
S-LINK AREA
controller
SL-CU1A from external devices correctly. It also monitors the signal transmission line, and specifies SENSORS
the addresses of the disconnected devices if the line breaks, etc.
LIGHT
CURTAINS /
SAFETY
COMPONENTS
PRESSURE /
FLOW
FPΣ
FPG-SL It controls the S-LINK system by directly connecting to the FPΣ series.
SENSORS
S-LINK
(AFPG780) INDUCTIVE
unit PROXIMITY
SENSORS
PARTICULAR
USE
SENSORS
FP0
S-LINK FP0-SL1 It controls the S-LINK system by directly connecting to the FP0 series.
SENSOR
OPTIONS
Control (AFP02700)
unit SIMPLE
WIRE-SAVING
UNITS
WIRE-SAVING
SYSTEMS
FP2SH
FP2-SL2 It controls the S-LINK system by directly connecting to the FP2SH series.
S-LINK MEASURE-
(AFP2780) MENT
unit SENSORS
STATIC
ELECTRICITY
PREVENTION
DEVICES
Mitsubishi It can be directly connected to the bus line of the MELSEC-Q series PLC manufactured by
Electric PLC Mitsubishi Electric Corp. LASER
MARKERS
bus S-LINK
SL-MEL-Q Has S-LINK controller as well as PLC input and output connector functions so you don’t
controller have to prepare for these items. Also, it doesn’t need a PLC input or output module.
PLC
HUMAN
It can be directly connected to the bus line of the FA-M3 series PLC manufactured by MACHINE
Yokogawa INTERFACES
Electric PLC Yokogawa Electric Corp.
ENERGY
bus S-LINK
SL-FAM3 Has S-LINK controller as well as PLC input and output connector functions so you don’t CONSUMPTION
VISUALIZATION
controller have to prepare for these items. Also, it doesn’t need a PLC input or output module. COMPONENTS
FA
COMPONENTS
It can be fitted into the expansion slot (ISA bus) of PC/AT series or compatible to control
PC/AT S-LINK the S-LINK system. MACHINE
control board
SL-PCAT Has S-LINK controller as well as PLC input and output connector functions so you don’t
VISION
SYSTEMS
have to prepare for these items. UV
CURING
SYSTEMS
Controls the S-LINK system by directly coupling (stack) the PC/104 bus line to a PC/104
PC/104 bus bus compatible PC board or panel computer.
S-LINK control SL-PC104 Has S-LINK controller as well as PLC input and output connector functions so you don’t
board
have to prepare for these items.
FIBER
SENSORS
ORDER GUIDE
LASER
SENSORS Products for open network
PHOTO-
ELECTRIC
SENSORS Designation Appearance (Note) Model No. Description
MICRO
PHOTO-
ELECTRIC
SENSORS S-LINK
gateway S-LINK gateway controller for connection to open network CC-Link, promoted by Mitsubishi
AREA
controller for
SL-GU1-C Electric Corp.
SENSORS
CC-Link
LIGHT
CURTAINS /
SAFETY
COMPONENTS S-LINK
PRESSURE / gateway S-LINK gateway controller for connection to open network DeviceNet.
FLOW controller for
SL-GU1-D * The SL-GU1-D will be discontinued at the end of September, 2015.
SENSORS
DeviceNet
INDUCTIVE
PROXIMITY
SENSORS Note: Components with “ ” mark conform to the CE marking EMC Directive.
The following condition must be met to conform to EN 61000-6-2.
PARTICULAR
USE • Conditions
SENSORS 1 Cable length between the main power supply and the S-LINK control unit should be less than 10 m 32.808 ft.
2 When the power is supplied from S-LINK control unit to S-LINK I/O devices at a cable distance of more than 10 m 32.808 ft add a surge absorber
SENSOR
OPTIONS between 24 V and 0 V at a cable distance of less than 10 m 32.808 ft, or use a local power supply at a cable distance of less than 10 m 32.808 ft from
each S-LINK I/O device.
SIMPLE
WIRE-SAVING
UNITS
PREVENTION
DEVICES This is the Multi-core cable PLC I/O unit for connecting the screw-
SL-S SL-P on terminal type PLC with the S-LINK system.
LASER
MARKERS Interfaces I/O data between the S-LINK controller and PLC.
Multi-core
It includes the I/O data conversion circuit for serial to parallel or
cable PLC
parallel to serial conversion.
I/O unit
PLC
PLC
PNP type
S-LINK
Sensor & Wire-saving Link System S-LINK
1044
LASER
PLC related units SENSORS
)
) Max. four PLC I/O modules (NPN I/O type) SL-S4 SL-P4 Manufacturing
PLC output connectors can be JW-34NC JW-32SC
allow the mating PLC I/O Systems Corp. JW50H PLC
connector cascaded with one JW-64NC JW-62SC
S-LINK controller. connector to be plugged
on them for signal CJ1W-ID231 CJ1W-OD231 HUMAN
transmission between CJ1 CJ1W-ID261 CJ1W-OD261 MACHINE
CJ1W-MD261 (X side) CJ1W-MD261 (Y side) INTERFACES
the PLC and the S-LINK
PLC
ENERGY
controller. CS1W-ID231 CS1W-OD231 CONSUMPTION
CS1 CS1W-ID261 CS1W-OD261 VISUALIZATION
COMPONENTS
CS1W-MD261 (X side) CS1W-MD261 (Y side)
The PLC I/O
End connector converts Omron Corp. CVM1, CV FA
COMPONENTS
connector I/O data from serial C500 C500-ID219 C500-OD213
C1000H
to parallel, and vice C2000H
MACHINE
Control cable VISION
versa. SYSTEMS
C200H series C200H-ID216 C200H-OD218
I/O points: 32 points C200H-ID217 C200H-OD219
Cascade cable SL-S5 SL-P5 UV
per connector CURING
CQM1 CQM1-ID213 CQM1-OD213 SYSTEMS
Hitachi Ltd. EH-150 EH-XD32 EH-YT32
XD64-6N YD64-1A
FA500
Yokogawa WD64-6N (X side) WD64-6N (Y side)
Electric Corp. F3XD32-3N F3YD32-1A
FA-M3 F3XD64-3N F3YD64-1A
DI-335
Toshiba Corp. T3 DO-335
DI-335H For Large Scale
GL20, GL40S Systems
Yasukawa –
GL60S, GL60H B2604 For Medium
Electric Corp. GL70H Scale Systems
End
connector
SL-E It must be connected at the end of the last PLC I/O connector.
FIBER
SENSORS
ORDER GUIDE
LASER
SENSORS S-LINK I/O devices
PHOTO-
ELECTRIC
SENSORS Designation Appearance (Note) Model No. Description
MICRO
PHOTO-
ELECTRIC
SENSORS It can be used as either an input unit or an output unit by switch
SL-CH1 NPN type
AREA selection.
SENSORS 1 channel
Signals, such as from the sensor and limit switch, can be transmitted
I/O unit
LIGHT by the signal transmission line. These signals from the signal
CURTAINS / SL-CH1-PN PNP type transmission line can turn ON / OFF the transistor output.
SAFETY
COMPONENTS
PRESSURE /
FLOW
SENSORS SL-CH21 NPN type
INDUCTIVE 2 channel 1 input and 1 output are equipped. 1 input device and 1 output
PROXIMITY I/O mixed unit device are connectable.
SENSORS
SL-CH21-PN PNP type
PARTICULAR
USE
SENSORS
WIRE-SAVING
SYSTEMS
SL-CH22 NPN type
MEASURE-
MENT 2 channel
SENSORS 2 output devices are connectable.
output unit
STATIC
ELECTRICITY SL-CH22-PN PNP type
PREVENTION
DEVICES
8 channel
LASER SL-T8J 8 NPN inputs
MARKERS snap-
connector 8 input or 8 output devices are connectable with snap male
input unit SL-T8J-PN 8 PNP inputs connectors.
PLC
The output unit is incorporated with an output signal hold function,
8 channel
SL-TP8J 8 NPN outputs which retains the output state just prior to an error on the signal
Connector I/O unit
S-LINK
Sensor & Wire-saving Link System S-LINK
1046
LASER
S-LINK I/O devices SENSORS
PHOTO-
ELECTRIC
Designation Appearance (Note 1) Model No. Description SENSORS
MICRO
PHOTO-
ELECTRIC
SL-TB4 4 NPN inputs SENSORS
AREA
SENSORS
SL-TB4-PN 4 PNP inputs
LIGHT
CURTAINS /
SL-TB8 8 NPN inputs They are screw-on terminal units to which 4, 8 or 16 input devices
SAFETY
COMPONENTS
Input
are connectable. Since power supply terminals have been provided PRESSURE /
terminal
SL-TB8-PN 8 PNP inputs for every two input channel, neat wiring is possible. FLOW
SENSORS
INDUCTIVE
SL-TB16 16 NPN inputs PROXIMITY
SENSORS
PARTICULAR
SL-TB16-PN 16 PNP inputs USE
SENSORS
I/O arrayed terminal unit
SIMPLE
SL-TBP4-PN 4 PNP outputs WIRE-SAVING
UNITS
SL-TBP8 8 NPN outputs They are screw-on terminal units to which 4, 8 or 16 output devices WIRE-SAVING
Output are connectable. The output unit is incorporated with an output SYSTEMS
terminal signal hold function, which retains the output state just prior to an
SL-TBP8-PN 8 PNP outputs error on the signal transmission line. MEASURE-
MENT
SENSORS
SL-TBP16 16 NPN outputs STATIC
ELECTRICITY
PREVENTION
DEVICES
SL-TBP16-PN 16 PNP outputs
LASER
MARKERS
SL-TBP4-TY 4 NPN outputs
In the case that a malfunction occurs to the output device that is
Separate being connected, they enable forced turning OFF of the output PLC
load power SL-TBP8-TY 8 NPN outputs device connected to the output terminal without halting the
supply type complete S-LINK system, by switching off the load power HUMAN
MACHINE
supply. INTERFACES
SL-TBP16-TY 16 NPN outputs
ENERGY
CONSUMPTION
Relay output terminal unit
VISUALIZATION
4 relay They are terminal units to which 4 or 8 output devices can be COMPONENTS
output
SL-TPR4 4 outputs (Note 2)
connected by slim socket relays that can be easily replaced. FA
They are incorporated with an output signal hold function which COMPONENTS
8 relay retains the output state just prior to an error on the signal MACHINE
output
SL-TPR8 8 outputs (Note 2) transmission line. VISION
SYSTEMS
S-LINK
1047 Sensor & Wire-saving Link System S-LINK
FIBER
SENSORS
ORDER GUIDE
LASER
SENSORS S-LINK I/O devices
PHOTO-
ELECTRIC
SENSORS Designation Appearance (Note) Model No. Description
MICRO
PHOTO-
ELECTRIC
SENSORS It allows connection of various kinds of input devices, such as, photoelectric sensors,
inductive proximity sensors, limit switches, and push buttons with the snap female
AREA
SENSORS Sensor connectors. Changes signals from input devices into serial signals and transmits them to
main SL-BMJ the signal transmission line. One SL-BMJ can be extended by one SL-BXJ or two SL-BXs,
Snap-connector
LIGHT
CURTAINS / block up to 16 input points.
SAFETY
COMPONENTS It can generate the ORed self-diagnosis output of all the connected devices.
PRESSURE / In this case, the first channel gets occupied.
FLOW
SENSORS
INDUCTIVE
PROXIMITY
SENSORS Extension
SL-BXJ It can follow either main block, and allows connection of 8 input devices.
Sensor block
block
PARTICULAR
USE
SENSORS
SENSOR It allows connection of various kinds of plug-in units and changes signals from plug-in units
OPTIONS into serial signals and transmits them to the signal transmission line.
Sensor One SL-BM can be extended by three SL-BXs or one SL-BX plus one SL-BXJ, up to 16
SIMPLE
WIRE-SAVING main SL-BM input points.
For plug-in unit
UNITS block
It can generate the ORed self-diagnosis output of all connected units. In this
WIRE-SAVING case, the first channel gets occupied.
SYSTEMS
MEASURE-
MENT
SENSORS Extension
STATIC block
SL-BX It can follow either main block, and allows connection of four plug-in units.
ELECTRICITY
PREVENTION
DEVICES
LASER
MARKERS Amplifier-
Its thickness is merely 10 mm 0.394 in. The sensitivity is automatically set with ease.12
separated
photoelectric
SU-7J kinds of sensor heads are suitable with it.
Plug-in unit
FA Retroreflective type
COMPONENTS with polarizing filters SL-A11 Thru-beam type 10 m 32.808 ft
LASER
Connectors SENSORS
PHOTO-
ELECTRIC
Designation Appearance Model No. Description SENSORS
MICRO
PHOTO-
SL-J1A It creates a “T”-branch connection between two S-LINK exclusive flat cables (4-core). ELECTRIC
Hook-up SENSORS
For 0.5 mm2 flat cable to 0.5 mm2 flat cable connection (Gray)
connector 10 pcs. per set
(Note) Applicable hook-up pliers: SL-JPS, SL-JPD AREA
SENSORS
Cable extension SL-J3A It can extend the S-LINK exclusive flat cable (4-core). LIGHT
hook-up For 0.5 mm2 flat cable to 0.5 mm2 flat cable connection (Black) CURTAINS /
connector (Note) 10 pcs. per set Applicable hook-up pliers: SL-JPS, SL-JPD SAFETY
COMPONENTS
(Note) ø0.028 to ø0.047 in This snap male connector is used for connecting
S-LINK I/O devices to SL-T8J(-PN) and HUMAN
For 0.3 mm2 MACHINE
SL-CP2 (Black) SL-TP8J(-PN) 8-channel snap-connector I/O units as INTERFACES
4-pin type snap (Conductor cross-section area)
well as to SL-JK and SL-JK1 hook-up connectors. ENERGY
male connector 10 pcs. per set Wire dia.: ø
1.1 to ø1.6 mm
Applicable hook-up pliers: SL-JPC CONSUMPTION
4
3
2
1
UV
CURING
SYSTEMS
S-LINK
1049 Sensor & Wire-saving Link System S-LINK
FIBER
SENSORS
ORDER GUIDE
LASER
SENSORS Basic units
PHOTO-
ELECTRIC
SENSORS Designation Appearance Model No. Description
MICRO
PHOTO-
ELECTRIC
SENSORS SL-M8 8 inputs
AREA Input
SENSORS module
LIGHT
SL-M16 16 inputs
Vertical type
CURTAINS /
SAFETY
COMPONENTS I/O mixed
module
SL-M4P4 4 inputs and 4 outputs
PRESSURE /
FLOW
SENSORS
PARTICULAR SL-MP16 16 outputs These are IC type modules which enable external connection of
USE
SENSORS address setting switches and operation indicators.
They increase the design flexibility.
SENSOR SL-M8F 8 inputs
OPTIONS Input
module
SIMPLE SL-M16F 16 inputs
Horizontal type
WIRE-SAVING
UNITS
I/O mixed
WIRE-SAVING
module
SL-M4P4F 4 inputs and 4 outputs
SYSTEMS
MEASURE-
MENT SL-MP8F 8 outputs
SENSORS Output
STATIC module
ELECTRICITY
PREVENTION SL-MP16F 16 outputs
DEVICES
LASER
MARKERS
Optional units
PLC
MACHINE It can be connected at any place on the signal transmission line and the I/O states can be
VISION
SYSTEMS checked in batches of 16.
UV
Handy monitor SL-HM1 The handy monitor is also incorporated with the S-LINK control functions, so that, for
CURING example, it can perform an I/O check on conveyor system segments, still under assembly,
SYSTEMS
even without the S-LINK controller.
Note: Components with “ ” mark conform to the CE marking EMC Directive.
S-LINK
Sensor & Wire-saving Link System S-LINK
1050
LASER
Others SENSORS
PHOTO-
ELECTRIC
Designation Appearance Model No. Description SENSORS
MICRO
PHOTO-
ELECTRIC
SENSORS
8-branch Connects easily to up to 8 thru-beam type photoelectric sensor emitters or S-LINK
connector tap
SL-T8PW I/O devices with snap male connectors.
AREA
SENSORS
LIGHT
CURTAINS /
For 0.08 to 0.2 mm2 SAFETY
SL-CJ12 (White) (Conductor cross-section area) COMPONENTS
Wire dia.: ø
0.7 to ø1.2 mm PRESSURE /
10 pcs. per set It can be used for cable extension of 2-wire I/O FLOW
2-pin type (Note) ø0.028 to ø0.047 in devices by combining with a 2-pin type snap male SENSORS
snap female
For 0.3 mm2 connector SL-CP□2. INDUCTIVE
connector SL-CJ22 (Black) (Conductor cross-section area) Applicable hook-up pliers: SL-JPC PROXIMITY
SENSORS
10 pcs. per set Wire dia.: ø
1.1 to ø1.6 mm
(Note) ø0.043 to ø 0.063 in PARTICULAR
USE
For 0.08 to 0.2 mm2 SENSORS
SL-CP12 (White) (Conductor cross-section area)
SENSOR
10 pcs. per set Wire dia.: ø
0.7 to ø1.2 mm It can be used for cable extension of 2-wire I/O OPTIONS
2-pin type (Note) ø0.028 to ø0.047 in devices by combining with a 2-pin type snap female
snap male SIMPLE
For 0.3 mm2 connector SL-CJ□2.
connector SL-CP22 (Black) (Conductor cross-section area)
WIRE-SAVING
Applicable hook-up pliers: SL-JPC UNITS
10 pcs. per set Wire dia.: ø
1.1 to ø1.6 mm
(Note) WIRE-SAVING
ø0.043 to ø 0.063 in SYSTEMS
SL-RCM100 D line: White 1 MEASURE-
MENT
SL-RCM100-PK Length: D line: White with pink stripe 2 SENSORS
Exclusive 2 S-LINK / S-LINK V exclusive flat cable (4-core)
1 5 100 m STATIC
flat cable SL-RCM100-GN 328.084 ft D line: White with green stripe 3 Conductor cross-section area: 0.5 mm2 ELECTRICITY
PREVENTION
(4-core) 3 Outer diameter: ø2.5 mm ø0.098 in × 4 DEVICES
SL-RCM100-GY D line: White with gray stripe 4
LASER
MARKERS
4 (Note) SL-RCM200 Length: 200 m 656.168 ft, D line: White 5
S-LINK / S-LINK V exclusive cabtyre cable (4-core)
Exclusive SL-CBM100 Length: 100 m 328.084ft PLC
Conductor cross-section area: 0.5 mm2
cabtyre cable
Outer diameter: ø7.4 mm ø0.291 in
(4-core) SL-CBM200 Length: 200 m 656.168 ft (Hook-up connector cannot be used)
HUMAN
MACHINE
INTERFACES
ENERGY
CONSUMPTION
Exclusive pliers SL-JPS Hook-up connector (SL-J□) can be connected in one grip. VISUALIZATION
COMPONENTS
FA
COMPONENTS
SL-CP3 MACHINE
exclusive pliers
SL-JPE 4-pin type snap male connector (SL-CP3) can be connected in one grip. VISION
SYSTEMS
UV
CURING
SYSTEMS
Male / female
connector Snap female connector (SL-CJ1/CJ2, SL-CJ11/CJ12) and snap male connector
exclusive
SL-JPC (SL-CP1/CP2, SL-CP11/CP12) can be connected in one grip.
pliers
By sticking the labels on the respective S-LINK devices, the set addresses can be
SL-MA1-SET confirmed at one glance. SL-MA1-SET is available in white, pink, green and gray colors, as
Address label
4 sheets. per set a 4-sheet set, and is convenient when used by matching the color with that of the S-LINK For Large Scale
Systems
exclusive flat cable (100 m 328.084 ft type).
For Medium
Scale Systems
DIN rail
MS-CH×10 Mounting bracket enabling the SL-CH□(-PN) I/O units to be mounted onto a 35 mm
mounting
1.378 in width DIN rail. They can also be affixed with screws.
bracket for 10 pcs. per set S-LINK
(When affixing with screws, arrange two M4 pan-head screws separately.)
SL-CH□
FIBER
SENSORS
ORDER GUIDE
LASER
SENSORS Accessories
PHOTO-
ELECTRIC
• NPS-CV • RF-230 • MS-SL-2
SENSORS
Protective cover for the SL-CU1A, (Reflector for the SL-A19) (Mounting base for connector I/O units)
MICRO
PHOTO- SL-BS1A or SL-CU1-485
ELECTRIC
SENSORS
AREA
SENSORS
LIGHT
CURTAINS /
SAFETY
COMPONENTS
PRESSURE /
FLOW
SENSORS
INDUCTIVE
PROXIMITY
SENSORS OPTIONS
PARTICULAR
USE
SENSORS
Sensor mounting bracket for SL-A□
SENSOR
OPTIONS Designation Model No. Description
• MS-NX5-1 • MS-NX5-2 • MS-NX5-3
SIMPLE
WIRE-SAVING Foot angled mounting bracket
UNITS MS-NX5-1 (The thru-beam type sensor needs two brackets.)
Sensor
WIRE-SAVING
SYSTEMS mounting Foot biangled mounting bracket (sensor protection bracket)
bracket for
MS-NX5-2 (The thru-beam type sensor needs two brackets.)
MEASURE-
MENT
SL-A□
Back angled mounting bracket
SENSORS MS-NX5-3 (The thru-beam type sensor needs two brackets.)
STATIC
ELECTRICITY
PREVENTION Two M4 (length 25 mm Two M4 (length 25 mm Two M4 (length 25 mm
DEVICES Four bracket set 0.984 in) screws with 0.984 in) screws with 0.984 in) screws with
Sensor MS-NA1-1 Four M4 (length 15 mm 0.591 in) screws with washers and two M4 nuts washers and two M4 nuts washers and two M4 nuts
LASER
MARKERS mounting washers, eight nuts, four hooks, four spacers are attached. are attached. are attached.
bracket for and eight M4 (length 18 mm 0.709 in) screws
SL-N15 with washers are attached. (Spacers are not Sensor mounting bracket for SL-N15
PLC MS-NA2-1
attached with MS-NA1-1.)
HUMAN • MS-NA1-1 • MS-NA2-1
MACHINE It protects the sensor body.
INTERFACES
Two bracket set (Silver)
ENERGY MS-NA3 Four M4 (length 15 mm 0.591 in) screws
CONSUMPTION Sensor
VISUALIZATION with washers, and four nuts are attached.
COMPONENTS protection
FA
bracket for It protects the sensor body.
COMPONENTS SL-N15 Two bracket set (Black)
MS-NA3-BK Four M4 (length 15 mm 0.591 in) screws
MACHINE
VISION with washers, and four nuts are attached.
SYSTEMS
UV Reflector M4 screws with washers, nuts and M4 screws with washers, nuts, hooks
CURING mounting bracket
MS-RF23 Reflector mounting bracket for RF-230 hooks are attached. and spacers are attached.
SYSTEMS
• MS-DIN-IDC
Slit mask for SL-N15 Connector I/O unit mounting bracket,
Two M4 (length 12 mm 0.472 in) 8-branch connector tap mounting bracket
screws with washers DIN rail adapter • OS-NA1-5
Two pcs. are attached with MS-DIN-IDC
the DIN rail adapter
• MS-DIN-3
35 mm 1.378 in 5
Stopper
1
LASER
SENSORS
danger of this product getting damaged due to the electrostatic charge. LIGHT
CURTAINS /
SAFETY
COMPONENTS
PRESSURE /
FLOW
SENSORS
The sensor & wire-saving link system S-LINK are not mutually interchangeable with the flexible wire-saving system S-LINK V
INDUCTIVE
and cannot be mixed or matched. Please exercise caution. PROXIMITY
SENSORS
Nevertheless, any of the exclusive 4-core flat cable, connectors, hook-up pliers, or SL-T8PW 8-branch connector taps PARTICULAR
can be used. USE
SENSORS
SENSOR
OPTIONS
Information about Refer directly to our partner makers for more details pertaining to SIMPLE
WIRE-SAVING
SYSTEMS
LASER
MARKERS
PLC
HUMAN
MACHINE
INTERFACES
ENERGY
[S-LINK direct hook-up I/O devices] CONSUMPTION
VISUALIZATION
COMPONENTS
S-LINK
Information about the “Design Manual” and “Construction Manual” for the S-LINK
sensor & wire-saving link system
We have two manuals available with more detailed information pertaining to the S-LINK sensor & wire-saving link
system. Please contact our office for details.