Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

12/12/21 15:27 VVC - A318 / A319 / A320 / A321 - AMM - 01-Nov-2021 - 53-15-11-700-002-A - Tap Test of the Radome

REVISION REVISION
CUSTOMIZATION AIRCRAFT TYPES DOCTYPES TITLE
DATE NUMBER
A318 A319 A321 53-15-11-700-002-A - Tap Test of the
VVC AMM 01-Nov-2021 5
A320 Radome
TAIL NUMBER - MSN - FSN:
Print date: 2021-12-12 21:27:08

** ON A/C FSN ALL


TASK 53-15-11-700-002-A
Tap Test of the Radome
1. Reason for the Job
Self explanatory

2. Job Set-up Information

A. Fixtures, Tools, Test and Support Equipment

QT
REFERENCE DESIGNATION
Y
No specific AR ACCESS PLATFORM 5M (16 FT)- ADJUSTABLE
No specific AR MARKER - CHALK, STICK

B. Work Zones and Access Panels

ZONE/ACCESS ZONE DESCRIPTION


110 RADOME (NOSE CONE TO FR 1)

C. Referenced Information

REFERENCE DESIGNATION
Ref. 53-15-11-010-001-A Opening of the Radome
Ref. 53-15-11-410-001-A Closing of the Radome
Ref. NTM 51-10-03

3. Job Set-up
SUBTASK 53-15-11-941-060-A
A. Get Access
(1) Put the ACCESS PLATFORM 5M (16 FT)- ADJUSTABLE in position at zone 110.
(2) If necessary, open the radome Ref. AMM TASK 53-15-11-010-001.

4. Procedure
SUBTASK 53-15-11-750-050-A

CAUTION: TAP THE SURFACE OF THE COMPONENT LIGHTLY. IF YOU APPLY TOO MUCH
FORCE, YOU CAN CAUSE DAMAGE TO THE RADOME.
A. Tap Test

NOTE: If a boot is installed, it is not necessary to remove the boot from the radome to do
the tap test.
© AIRBUS S.A.S. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT.
1/2
12/12/21 15:27 VVC - A318 / A319 / A320 / A321 - AMM - 01-Nov-2021 - 53-15-11-700-002-A - Tap Test of the Radome

REVISION REVISION
CUSTOMIZATION AIRCRAFT TYPES DOCTYPES TITLE
DATE NUMBER
A318 A319 A321 53-15-11-700-002-A - Tap Test of the
VVC AMM 01-Nov-2021 5
A320 Radome
TAIL NUMBER - MSN - FSN:
Print date: 2021-12-12 21:27:08

(1) Refer to Ref. NTM 51-10-03.


(2) Identify the damage area on the aircraft skin with the MARKER - CHALK, STICK.

5. Close-up
SUBTASK 53-15-11-860-050-A
A. Close Access
(1) Make sure that the work area is clean and clear of tools and other items.
(2) If necessary, close the radome Ref. AMM TASK 53-15-11-410-001.
Remove the ground support and maintenance equipment, the special and standard to
(3) ols and all other items.
(4) Remove the access platform(s).

© AIRBUS S.A.S. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT.


2/2

You might also like