Professional Documents
Culture Documents
PB - PM Bargraph - Digital Display Panel Meter - B0 - 667004095
PB - PM Bargraph - Digital Display Panel Meter - B0 - 667004095
www.fine-tek.com
INTRODUCTION
FEATURES
Adapts microprocessor control circuit,
modular design, advanced digital
calibration, and switching power supply
technology.
Modulized design is a concept to adapt different
analog input signals by means of changing
different signal board (such as temperature,
pressure, alternating voltage, electric current.).
Also, optional output board could add the analog
output signal (isolated). By using advanced digital
calibration capability, its analog input/output could
be accurate to +/- 1 bit.
PB-2471 is designed for dual channel PM-1530/1430 are single channel models with 5-
applications. It can measure 2 input signals digit or 4 digit LED display respectively.
simultaneously by only one meter. Also, it
supports 2 channels analog output signals and
4 relay contacts. To users, it provides both
convenient panel layout operation and
relatively lower cost when compared with using
two panel meters.
1
NON-LINEAR TANK VOLUME CONVERSION FEATURE
TANK TYPE:
Length
Width
Length
Height 1
Height
Diameter
Height 2
Width
Length Width
Diameter
Diameter
Height 1 Height 1
Height
Height 2
Height 2
Diameter
Length Length
Height 1
Diameter Diameter
Height 2
Length
Width
Length
Height 2
Height 1
Height
2
SPECIFICATIONS
Appearance
Dimension 48 (W) x144 (H) x121.5 (D) 48 (W) x144 (H) x121.5 (D) 144 (W) x48 (H) x121.5 (D) 144 (W) x48 (H) x121.5 (D)
(mm) DIN 3/16 DIN 3/16 DIN 3/16 DIN 3/16
Dual Row 4-digit 7-segment LED 4 Digits 7-Segment LED 4 Digits 7-Segment LED 5 Digits 7-Segment LED
Dual Column 101-segment LED 101 LED Bargraph Display 101 LED Bargraph Display 101 LED Bargraph Display
Display Bargraph Display Totally 6 Set Points Totally 6 Set Points Totally 6 Set Points
Totally 8 Set Points
Display
Range -1999 ~ +9999。 -1999 ~ +9999。 -1999 ~ +9999。 -19999 ~ +32767。
20mA, 200mA, 5V, 10V, 20mA, 200mA, 5V, 10V, 20mA, 200mA, 5V, 10V, 20mA, 200mA, 5V, 10V,
Input 20V ,200V 20V ,200V 20V ,200V 20V ,200V
Standard
signal (Refer to Input Signal Setting) (Refer to Input Signal Setting) (Refer to Input Signal Setting) (Refer to Input Signal Setting)
Relay
contact 4 Relay 4 Relay 4 Relay 4 Relay
Analog 4~20mA, 0~20mA, 2~10V 4~20mA, 0~20mA, 2~10V 4~20mA, 0~20mA, 2~10V 4~20mA, 0~20mA, 2~10V
Optional
Communi-
cation port RS-485 (Modbus) RS-485 (Modbus) RS-485 (Modbus) RS-485 (Modbus)
Non-Linear Non-Linear Tank Volume Non-Linear Tank Volume Non-Linear Tank Volume Non-Linear Tank Volume
Function Conversion Feature ( 20 points) Conversion Feature ( 20 points) Conversion Feature ( 20 points) Conversion Feature ( 20 points)
3
SPECIFICATIONS
Appearance
Dimension 96 (W) x48 (H) x128.5 (D) 96 (W) x48 (H) x128.5 (D) 96 (W) x48 (H) x128.5(D) 96 (W) x48 (H) x128.5(D)
(mm) DIN 1/8 DIN 1/8 DIN 1/8 DIN 1/8
20mA, 200mA, 5V, 10V, 20mA, 200mA, 5V, 10V, 20mA, 200mA, 5V, 10V, 20mA, 200mA, 5V, 10V,
Input 20V ,200V 20V ,200V 20V ,200V 20V ,200V
Standard
signal (Refer to Input Signal Setting) (Refer to Input Signal Setting) (Refer to Input Signal Setting) (Refer to Input Signal Setting)
Relay
2 Relay 4 Relay 2 Relay 4 Relay
contact
Analog 4~20mA, 0~20mA, 2~10V 4~20mA, 0~20mA, 2~10V 4~20mA, 0~20mA, 2~10V
4~20mA, 0~20mA, 2~10V
Optional
Communi-
cation port RS-485 (Modbus) RS-485 (Modbus) RS-485 (Modbus) RS-485 (Modbus)
4
Microprocessor Bargraph
PB-2471
Display Panel Meter
TERMINAL (Option)
Isolated
ARRANGEMENTS: EXC 24V 1 19 +24V
GND
GND 2 20
Volt Input 3 21 Analog O/P+
Current Input 4
{ CH1 22 Analog GND { CH1
Analog O/P+
Signal GND
Volt Input
5
6
23
24 Analog GND
{ CH2
Current Input
Signal GND
7
8
{ CH2
9 25 + {
CH2 SP2 RS485
10 26 -
11 27
CH2 SP1
12 28
13 29
CH1 SP2 CH2 SP4
14 30
15 31
CH1 SP1 CH2 SP3
16 32
AUX. 17 33
CH1 SP4
POWER 18 34
35
CH1 SP3
FEATURES: 36
SPECIFICATIONS
ORDERING INFORMATION:
Dimension (mm) 48 (W) x144 (H) x121.5 (D) DIN 3/16 PB-2471-9 99-9 9 9 9
Model PB-2471 Power S---85~265V AC
supply T---18~36V DC
85 ~ 265V AC or 18~36V DC 1---4~20mA DC with Exc 24V
Power supply Switching Power Supply Input
2---0~20 mA DC with Exc 24V
signal
3---0~200 mA DC with Exc 24V
Power supply for sensor DC24V, 50mA (CH1)
4---5V DC with Exc 24V
5---10V DC with Exc 24V
Dual 4 Digits, 0.36" 7-Segment LED 6---20V DC with Exc 24V
7---200V DC with Exc 24V
Display
101 LED Bargraph Display
Display Input 1---4~20mA DC with Exc 24V
4 LED set-point indicator signal 2---0~20 mA DC with Exc 24V
(CH2) 3---0~200 mA DC with Exc 24V
Display Range: -1999 ~ +9999 4---5V DC with Exc 24V
5---10V DC with Exc 24V
Over Range Display: "1" or "-1" 6---20V DC with Exc 24V
7---200V DC with Exc 24V
Analog output 4~20mA, 0~20mA, 2~10V and 0~10V (optional) Communi- 0---Without
cation port 1---Support RS485 interface
Power comsumption Less then 12VA
Communication port RS485 (optional) Modbus Protocol Ex: PB-2471-S14-4000
Represents: PB-2471 Model, Power supply 85~265V AC,
Operating condition 0~50℃(20 to 90% RH non-condensed) Analog input signal, CH1: 4~20mA, CH2: 0~5V,
Storage condition 0~70℃(20 to 90% RH non-condensed) 4 relay contact, without Non-Linear Function,
without Analog output.
5
Microprocessor Bargraph
PB-1471
Display Panel Meter
TERMINAL (Option)
Isolated
ARRANGEMENTS: EXC 24V 1 19 +24V
GND 2 20 GND
Volt Input Signal 3 21 Analog O/P+
Current Input Signal 4 22 Analog GND
Signal GND 5 23
6 24
7
8
9 25 + {
SP4 RS485
10 26 -
11 27
SP3
12 28
13 29
SP2 Option
14 30
15 31
SP1
16 32
AUX. 17 33
POWER SP6
18 34
35
SP5
FEATURES: 36
SPECIFICATIONS
ORDERING INFORMATION:
Dimension (mm) 48 (W) x144 (H) x121.5 (D) DIN 3/16 PB-1471-9 99-9 9 9 9
Model PB-1471 Power S---85~265V AC
supply T---18~36V DC
85 ~ 265V AC or 18~36V DC 01---4~20mA DC with Exc 24V
Power SUPply Switching Power Supply 02---0~20 mA DC with Exc 24V
03---0~200 mA DC with Exc 24V
Power supply for sensor DC24V, 50mA 04---5V DC with Exc 24V
05---10V DC with Exc 24V
4 Digits, 0.36" 7-Segment red LED 06---20V DC with Exc 24V
07---200V DC with Exc 24V
Display
Input
101 LED Bargraph Display signal
Display
6 LED set-point indicator A1---2mA AC RMS C1---K2 mA DC with Exc 24V
A2---20mA AC RMS C2---K20 mA DC with Exc 24V
Display Range: -1999 ~ +9999 A3---200mA AC RMS C3---K200 mA DC with Exc 24V
A4---1A AC RMS C4---K1Amp DC
Over Range Display: "1" or "-1" A5---5A AC RMS C5---K5Amp DC
Analog output 4~20mA, 0~20mA, 2~10V and 0~10V (optional) Communi- 0---Without
cation port 1---Support RS485 interface
Power comsumption Less then 9VA
Communication port RS485 (optional) Modbus Protocol EX: PB-1471-S01-4101
Represents: PB-1471 Model, Power supply 85~265V AC,
Operating condition 0~50℃(20 to 90% RH non-condensed) Analog input signal 4~20mA, 4 relay contact,
Storage condition Support Non-Linear Function, without Analog
0~70℃(20 to 90% RH non-condensed)
output, Support RS485 interface.
6
Microprocessor Bargraph
PB-1470
Display Panel Meter
TERMINAL
ARRANGEMENTS:
Isolated
Analog
+24V GND
OUT GND RS485
SP6 SP5
+ -
19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36
(Option)
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
SPECIFICATIONS
ORDERING INFORMATION:
Dimension (mm) 144 (W) x48 (H) x121.5 (D) DIN 3/16 PB-1470-9 99-9 9 9 9
Model PB-1470 Power S---85~265V AC
supply T---18~36V DC
85 ~ 265V AC or 18~36V DC 01---4~20mA DC with Exc 24V
Power supply Switching Power Supply 02---0~20 mA DC with Exc 24V
03---0~200 mA DC with Exc 24V
Power supply for sensor DC24V, 50mA 04---5V DC with Exc 24V
05---10V DC with Exc 24V
4 Digits, 0.56" 7-Segment red LED 06---20V DC with Exc 24V
07---200V DC with Exc 24V
Display
Input
101 LED Bargraph Display signal
Display
6 LED set-point indicator A1---2mA AC RMS C1---K2 mA DC with Exc 24V
A2---20mA AC RMS C2---K20 mA DC with Exc 24V
Display Range: -1999 ~ +9999 A3---200mA AC RMS C3---K200 mA DC with Exc 24V
A4---1A AC RMS C4---K1Amp DC
Over Range Display: "1" or "-1" A5---5A AC RMS C5---K5Amp DC
Analog output 4~20mA, 0~20mA, 2~10V and 0~10V (optional) Communi- 0---Without
cation port 1---Support RS485 interface
Power comsumption Less then 9VA
Communication port RS485 (optional) Modbus Protocol EX: PB-1470-S01-4101
Represents: PB-1470 Model, Power supply 85~265V AC,
Operating condition 0~50℃(20 to 90% RH non-condensed) Analog input signal 4~20mA, 4 relay contact,
Storage condition Support Non-Linear Function, without Analog
0~70℃(20 to 90% RH non-condensed)
output, Support RS485 interface.
7
Microprocessor Bargraph
PB-1570
Display Panel Meter
TERMINAL
ARRANGEMENTS:
Isolated
Analog
+24V GND
OUT GND RS485
SP6 SP5
+ -
19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36
(Option)
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
SPECIFICATIONS
ORDERING INFORMATION:
Dimension (mm) 144 (W) x48 (H) x121.5 (D) DIN 3/16 PB-1570-9 99-9 9 9 9
Model PB-1570 Power S---85~265V AC
Supply T---18~36V DC
85 ~ 265V AC or 18~36V DC 01---4~20mA DC with Exc 24V
Power supply Switching Power Supply 02---0~20 mA DC with Exc 24V
03---0~200 mA DC with Exc 24V
Power supply for sensor DC24V, 50mA 04---5V DC with Exc 24V
05---10V DC with Exc 24V
5 Digits, 0.56" 7-Segment red LED 06---20V DC with Exc 24V
07---200V DC with Exc 24V
Display
Input
101 LED Bargraph Display Signal
Display
6 LED set-point indicator A1---2mA AC RMS C1---K2 mA DC with Exc 24V
A2---20mA AC RMS C2---K20 mA DC with Exc 24V
Display Range: -19999 ~ +32767 A3---200mA AC RMS C3---K200 mA DC with Exc 24V
A4---1A AC RMS C4---K1Amp DC
Over Range Display: "1" or "-1" A5---5A AC RMS C5---K5Amp DC
Analog output 4~20mA, 0~20mA, 2~10V and 0~10V (optional) Communi- 0---Without
cation port 1---Support RS485 interface
Power comsumption Less then 9VA
Communication port RS485 (optional) Modbus Protocol EX: PB-1570-S01-4101
Represents: PB-1570 Model, Power supply 85~265V AC,
Operating condition 0~50℃(20 to 90% RH non-condensed) Analog input signal 4~20mA, 4 relay contact,
Storage condition Support Non-Linear Function, without Analog
0~70℃(20 to 90% RH non-condensed)
output, Support RS485 interface.
8
Microprocessor Digit
PM-1430
Display Panel Meter
TERMINAL
ARRANGEMENTS:
RS485 SP4 SP3
Analog Iso
Out GND + - (NC/NO) (COM) (NC/NO) (COM)
11 12 13 14 15 16 17 18 19 20
(Option)
1 2 3 4 5 6 7 8 9 10
44.8
Support volume adjustment function for non-linear tanks
92 +0.8
-0 10 (min)
(optional)
IP54 Class front panel
規 格
SPECIFICATIONS
ORDERING INFORMATION:
Dimension (mm) 96 (W) x48 (H) x128.5 (D) DIN 1/8 PM-1430-9 99-9 9 9 9
Model PM-1430 Power S---85~265V AC
supply T---18~36V DC
85 ~ 265V AC or 18~36V DC 01---4~20mA DC with Exc 24V
Power supply Switching Power Supply 02---0~20 mA DC with Exc 24V
03---0~200 mA DC with Exc 24V
Power supply for sensor DC24V, 50mA 04---5V DC with Exc 24V
05---10V DC with Exc 24V
4 Digits, 0.56" 7-Segment red LED 06---20V DC with Exc 24V
07---200V DC with Exc 24V
Display
Input
4 LED set-point indicator signal
Display
Display Range: -1999 ~ +9999 A1---2mA AC RMS C1---K2 mA DC with Exc 24V
A2---20mA AC RMS C2---K20 mA DC with Exc 24V
Over Range Display: "1" or "-1" A3---200mA AC RMS C3---K200 mA DC with Exc 24V
A4---1A AC RMS C4---K1Amp DC
A5---5A AC RMS C5---K5Amp DC
Analog output 4~20mA, 0~20mA, 2~10V and 0~10V (optional) Communi- 0---Without
cation port 1---Support RS485 interface
Power comsumption Less then 7VA
Communication port RS485 (optional) Modbus Protocol EX: PM-1430-S01-4101
Represents: PM-1430 Model, Power supply 85~265V AC,
Operating condition 0~50℃(20 to 90% RH non-condensed) Analog input signal 4~20mA, 4 relay contact,
Storage condition Support Non-Linear Function, without Analog
0~70℃(20 to 90% RH non-condensed)
output, Support RS485 interface.
9
Microprocessor Digit
PM-2430
Display Panel Meter
TERMINAL
CH2
ARRANGEMENTS:
Analog Analog RS485 SP2 SP1
CH1 Iso CH2
Out GND Out + - (NC/NO) (COM) (NC/NO) (COM)
11 12 13 14 15 16 17 18 19 20
1 2 3 4 5 6 7 8 9 10
CH1
FEATURES:
Dual Channel Signal Input EXTERIOR/CUTOUT DIMENSIONS
Dual 4 Digits LED Numeric Display
96
Wide Range of User Definable Scaling Ratio
Modulized input signal boards available for 22
48
different applications (min)
規規 格格
SPECIFICATIONS
ORDERING INFORMATION:
Dimension (mm) 96 (W) x48 (H) x128.5 (D) DIN 1/8 PM-2430-9 99-9 9 9 9
Model PM-2430 Power S---85~265V AC
supply T---18~36V DC
85 ~ 265V AC or 18~36V DC 1---4~20mA DC with Exc 24V
Power supply Switching Power Supply Input
2---0~20 mA DC with Exc 24V
signal
3---0~200 mA DC with Exc 24V
Power supply for sensor DC24V, 50mA (CH1)
4---5V DC with Exc 24V
5---10V DC with Exc 24V
CH1: 4 Digits, 0.36" 7-Segment red LED 6---20V DC with Exc 24V
7---200V DC with Exc 24V
CH2: 4 Digits, 0.36" 7-Segment green LED
4 LED set-point indicator
Display Input 1---4~20mA DC with Exc 24V
Display Range: -1999 ~ +9999 signal 2---0~20 mA DC with Exc 24V
(CH2) 3---0~200 mA DC with Exc 24V
Over Range Display: "1" or "-1" 4---5V DC with Exc 24V
5---10V DC with Exc 24V
6---20V DC with Exc 24V
7---200V DC with Exc 24V
Analog output 4~20mA, 0~20mA, 2~10V and 0~10V (optional) Communi- 0---Without
cation port 1---Support RS485 interface
Power comsumption Less then 7VA
Communication port RS485 (optional) Modbus Protocol EX: PM-2430-S14-4000
Represents: PM-2430 Model, Power supply 85~265V AC,
Operating condition 0~50℃(20 to 90% RH non-condensed) Analog input signal CH1: 4~20mA,CH2: 0~5V,
Storage condition 0~70℃(20 to 90% RH non-condensed) 4 relay contact, without Non-Linear Function,
without Analog output.
10
Microprocessor Digit
PM-1530
Display Panel Meter
TERMINAL
ARRANGEMENTS:
RS485 SP4 SP3
Analog Iso
Out GND + - (NC/NO)(COM) (NC/NO) (COM)
11 12 13 14 15 16 17 18 19 20
(Option)
1 2 3 4 5 6 7 8 9 10
44.8
Support volume adjustment function for non-linear tanks 92 +0.8 10 (min)
-0
(optional)
IP54 Class front panel
規 格
SPECIFICATIONS
ORDERING INFORMATION:
Dimension (mm) 96 (W) x48 (H) x128.5 (D) DIN 1/8 PM-1530-9 99-9 9 9 9
Model PM-1530 Power S---85~265V AC
Supply T---18~36V DC
Analog output 4~20mA, 0~20mA, 2~10V and 0~10V (optional) Communi- 0---Without
cation port 1---Support RS485 interface
Power comsumption Less then 7VA
Communication port RS485 (optional) Modbus Protocol EX: PM-1530-S01-4101
Represents: PM-1530 Model, Power supply 85~265V AC,
Operating condition 0~50℃(20 to 90% RH non-condensed) Analog input signal 4~20mA, 4 relay contact,
Storage condition Support Non-Linear Function, without Analog
0~70℃(20 to 90% RH non-condensed)
output, Support RS485 interface.
11
Microprocessor Digit
PM-1X30-W
Display Panel Meter
TERMINAL
ARRANGEMENTS:
Isolated
Output
Analog RS485 D1
+24V GND CH1 GND
Input (Out) (Out) - -
+ +
17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
規規 格格
SPECIFICATIONS
ORDERING INFORMATION:
Dimension (mm) 96 (W) x48 (H) x128.5 (D) DIN 1/8 P M - 1 9 3 0 - W 99 - 9 9 9 9 9
Model PM-1 9 30-W Display
4 : 4 digit
5 : 5 digit
Power
20~250 Vac-dc, 50~60Hz
Power supply supply
20~250 Vac / Vdc 50/60Hz
01---4~20mA DC with Exc 24V
Power supply for sensor 02---0~20 mA DC with Exc 24V
03---0~200 mA DC with Exc 24V
04---0~5V DC with Exc 24V
05---0~10V DC with Exc 24V
5 Digits, 0.56" 7-Segment red LED 06---0~20V DC with Exc 24V
07---0~200V DC with Exc 24V
Display Input
signal A1---0~2mA AC RMS C1---0~K2 mA DC with Exc 24V
Display 4 LED set-point indicator A2---0~20mA AC RMS C2---0~K20 mA DC with Exc 24V
A3---0~200mA AC RMS C3---0~K200 mA DC with Exc 24V
Display Range: -19999 ~ +99999 A4---0~1A AC RMS C4---0~K1Amp DC
A5---0~5A AC RMS C5---0~K5Amp DC
Over Range Display: "1" or "-1" D1---0~K20mV DC with Exc 24V
B1---0~100mV AC RMS
B2---0~200mV AC RMS D2---0~K50mV DC with Exc 24V
B3---0~2V AC RMS D3---0~K100mV DC with Exc 24V
B4---0~20V AC RMS D4---0~K200mV DC with Exc 24V 可 程 式 數 字 顯 示 控 制 表
Range: Refer to Ordering information B5---0~200V AC RMS E1---5/10/20/50/100/200mV/
B6---0~600V AC RMS V DC (Option) with Exc 24V
Accuracy: 0.1%FS or A1 digit B7---0~1000V AC RMS E2---1/2/5/10/20mV/V DC (Option)
Temperature coefficient: 200ppm/℃ with ISO 10V
Input signal E3---1/2/10/20/40mV/V DC (Option)
ADC Resolution: 4-1/2 digit with ISO 5V
Sampling Rate:
F1----TC(K、J、E、N、T) & RTD (PT100、JPT100)
24 samples/second/channel F2----TC(K、J、R、S、B、E、N、T) & RTD (PT100、JPT100)
Relay
0~4:0~4 Relays
contact
Non-Linear 0---Without (Standard)
Relay contact 4 relay function 1---Support 20 points Vessel Conversion
3A/250V AC or 5A/30V DC
0---Without
Analog
1---0~10V Analog Output
output
2---0/4~20mA
Analog output 4~20mA, 0~20mA, 2~10V and 0~10V (optional) Communi- 0---Without
cation port 1---Support RS485 interface
Power comsumption Less then 7VA
0 : Without
Digital input
1 : DI
Communication port RS485 (optional) Modbus Protocol
Operating condition 0~50℃(20 to 90% RH non-condensed) EX: PM-1530-S01-41011
Represents: PM-1530 Model, Power supply 85~265V AC,
Storage condition 0~70℃(20 to 90% RH non-condensed) Analog input signal 4~20mA, 4 relay contact,
Support Non-Linear Function, without Analog
12 output, Support RS485 interface.
PB DC SIGNAL INPUT MODULE
This section will elaborate how to adapt to different input signals in the PB series panel meter, by using the
correct jumper and using iSEL command. Panel meter series can accommodate 6 types of conventional input
signals, 20mA, 200mA, 5V, 10V, 20V, 200V, please refer below for setup.
Dual Channel Signal Input Module: Single Channel Signal Input Module:
(for PB-2471) (for PB-1471, PB-1470, PB-1570)
11: 4~20mA DC with Excitation +24V 01: 4~20mA DC with Excitation +24V
EXC 24V EXC 24V
PIN 1 PIN 1
PIN 2 PIN 2
+ - + - Common PIN 3 + - Common PIN 3
PIN 4 PIN 4
200mA
200mA
20mA
200V
20mA
200V
10V
10V
20V
20V
5V
5V
CH1 Input PIN 5 CH1 Input PIN 5
PIN 6 PIN 6
PIN 7 PIN 7
CH2 Input PIN 8 PMB-0641 PIN 8 PMB-0641
22: 0~20mA DC with Excitation +24V 02: 0~20mA DC with Excitation +24V
EXC 24V PIN 1 EXC 24V PIN 1
Common PIN 2 Common PIN 2
PIN 3 PIN 3
CH1 Iinput PIN 4 CH1 Input PIN 4
200mA
200mA
DC mA
20mA
200V
10V
20V
20mA
200V
5V
10V
20V
5V
33: 0~200mA DC with Excitation +24V 03: 0~200mA DC with Excitation +24V
EXC 24V PIN 1 EXC 24V PIN 1
Common PIN 2 Common PIN 2
PIN 3 PIN 3
CH1 Iinput PIN 4 CH1 Input PIN 4
200mA
200mA
20mA
200V
10V
20V
DC mA
20mA
200V
10V
5V
20V
5V
CH1 GND PIN 5 Common PIN 5
PIN 6 PIN 6
CH2 Iinput PIN 7 PIN 7
CH2 GND PIN 8 PMB-0641 PIN 8 PMB-0640
20mA
200V
10V
20mA
200V
20V
10V
20V
5V
5V
200mA
20mA
200V
20mA
200V
10V
10V
20V
20V
5V
5V
200mA
20mA
200V
10V
20V
20mA
200V
10V
5V
20V
5V
77: A200V DC with Excitation +24V 07: A200V DC with Excitation +24V
EXC 24V PIN 1 EXC 24V PIN 1
Common PIN 2 Common PIN 2
CH1 Vinput PIN 3 CH1 Vinput PIN 3
PIN 4 DC V PIN 4
200mA
200mA
20mA
200V
10V
20V
20mA
200V
10V
5V
20V
5V
This section will elaborate how to adapt to different input signals in the PB series panel meter, by using the
correct jumper and using iSEL command. Panel meter series can accommodate 6 types of conventional input
signals, 20mA, 200mA, 5V, 10V, 20V, 200V, please refer below for setup.
PIN 6 PIN 6
J3
PIN 7 PIN 7
PIN 8 PMB-0672 PIN 8 PMB-0675
PIN 6 PIN 6
PIN 7 PIN 7
PMB-0672 PMB-0671
2V
200mV
PIN 8 PIN 8
PIN 6 PIN 6
PIN 7 PIN 7
PMB-0672 PMB-0671
2V
200mV
PIN 8 PIN 8
PIN 2
Vin (w) PIN 5 200V
600V
PIN 6
PIN 3
Secondary PIN 7
PIN 4 PMB-0670
1A PIN 8
PIN 5
Current PIN 6
J3
PIN 7
AC current
PIN 8 PMB-0674
B5: 200V ACScaled RMS
Primary
PIN 1
PIN 2
CH1 Vin ( v ) PIN 3
AC V PIN 4 20V
PIN 6
PIN 7
PIN 8 PMB-0670
PIN 1
PIN 2
B6: 600V AC Scaled RMS
PIN 3
Secondary
PIN 4 PIN 1
5A PIN 5 PIN 2
Current PIN 6 CH1 Vin ( v )
J3
PIN 3
PIN 7 AC V PIN 4 20V
AC current
PMB-0673
CH2 Vin (w)
200V
PIN 8 PIN 5 600V
Primary
PIN 6
PIN 7
PIN 8 PMB-0670
14
PB DC SIGNAL INPUT MODULE
This section will elaborate how to adapt to different input signals in the PB series panel meter, by using the
correct jumper and using iSEL command. Panel meter series can accommodate 6 types of conventional input
signals, 20mA, 200mA, 5V, 10V, 20V, 200V, please refer below for setup.
100mV
200mV
20mV
50mV
Common PIN 5 Common PIN 5
200mA
20mA
2mA
PIN 6 PIN 6
PIN 7 PIN 7
PIN 8 PMB-0681 PIN 8 PMB-0680
100mV
200mV
DC mA
20mV
50mV
Common PIN 5 Common PIN 5
200mA
20mA
2mA
PIN 6 PIN 6
PIN 7 PIN 7
PIN 8 PMB-0681 PIN 8 PMB-0680
C3: 200mA DC with Excitation +24V D3: 100 mV DC with Excitation +24V
EXC 24V PIN 1 EXC 24V PIN 1
Common PIN 2 Common PIN 2
PIN 3 Input PIN 3
Input PIN 4 DC mV PIN 4
100mV
200mV
DC mA
20mV
50mV
Common PIN 5 Common PIN 5
200mA
20mA
2mA
PIN 6 PIN 6
PIN 7 PIN 7
PIN 8 PMB-0681 PIN 8 PMB-0680
PIN 7
AC current
PIN 8 PMB-0683
Primary
C5: 5A DC
PIN 1
PIN 2
PIN 3
Secondary
PIN 4
5A PIN 5
Current PIN 6
J3
PIN 7
AC current
PIN 8 PMB-0682
Primary
15
PM DC SIGNAL INPUT MODULE
This section will elaborate how to adapt to different input signals in the PM series panel meter, by using the
correct jumper and using iSEL command. Panel meter series can accommodate 6 types of conventional input
signals, 20mA, 200mA, 5V, 10V, 20V, 200V, please refer below for setup.
Dual Channel Signal Input Module: (for PB-2430) Single Channel Signal Input Module:
(for PB-1430, PB-1530)
11: 4~20 mA DC with Excitation +24V 01:4~20mA DC with Excitation +24V
Common
I Ch1 V
PIN 2 Common PIN 2
200mA
20mA
DC mA
200mA
200V
20mA
20V
10V
200V
5V
20V
10V
5V
CH1 Input Input
I Ch2 V
PIN 3 PIN 3
22: 200 mA DC with Excitation +24V 02: 20mA DC with Excitation +24V
Common
I Ch1 V
PIN 2 Common PIN 2
200mA
20mA
DC mA
200mA
200V
20mA
20V
10V
200V
5V
20V
10V
5V
CH1 Input Input
I Ch2 V
PIN 3 PIN 3
33: 200 mA DC with Excitation +24V 03: 200mA DC with Excitation +24V
Common
I Ch1 V
PIN 2 Common PIN 2
200mA
20mA
DC mA
200mA
200V
20mA
20V
200V
5V
20V
10V
5V
CH1 Input Input
I Ch2 V
PIN 3 PIN 3
DC V
200mA
200V
20mA
20V
10V
200V
5V
20V
10V
5V
PIN 3 PIN 3
55: 10V DC with Excitation +24V 05: 10V DC with Excitation +24V
Common
I Ch1 V
DC V
200mA
200V
20mA
20V
10V
200V
5V
20V
10V
5V
PIN 3 PIN 3
66: 20V DC with Excitation +24V 06: 20V DC with Excitation +24V
Common
I Ch1 V
DC V
200mA
200V
20mA
20V
10V
200V
5V
20V
10V
5V
PIN 3 PIN 3
77: 20V DC with Excitation +24V 07: 200V DC with Excitation +24V
Common
I Ch1 V
DC V
200mA
200V
20mA
20V
10V
200V
5V
20V
10V
5V
PIN 3 PIN 3
16
PM AC SIGNAL INPUT MODULE
This section will elaborate how to adapt to different input signals in the PM series panel meter, by using the correct
jumper and using iSEL command. Panel meter series can accommodate 6 types of conventional input signals,
20mA, 200mA, 5V, 10V, 20V, 200V, please refer below for setup.
AC mA PIN 3 AC mV PIN 3
200mA
20mA
2mA
J3
Iin (w) PIN 4 Vin (w) PIN 4
AC mA PIN 3 AC mV PIN 3
200mA
20mA
2mA
2V
200mV
A3: 200mA AC Scaled RMS B3: 2V AC Scaled RMS
AC mA PIN 3 AC V PIN 3
200mA
20mA
2mA
200mV
PIN 1 PMB-0054
PIN 1 PMB-0058
Vin ( v ) PIN 2
20V
PIN 2 200V
AC V PIN 3 600V
1A Secondary PIN 3
Vin (w) PIN 4
J3
Current PIN 4
AC current
Primary
PIN 1 PMB-0054
Vin ( v ) PIN 2
20V
PIN 1 PMB-0057
PIN 2
B6: 600V AC Scaled RMS
Secondary PIN 3
5A
J3
Vin ( v ) PIN 2
Primary
20V
200V
AC V PIN 3 600V
17
PM DC SIGNAL INPUT MODULE
This section will elaborate how to adapt to different input signals in the PM series panel meter, by using the
correct jumper and using iSEL command. Panel meter series can accommodate 6 types of conventional input
signals, 20mA, 200mA, 5V, 10V, 20V, 200V, please refer below for setup.
PIN 1
PMB-0051 PMB-0050
EXC 24V EXC 24V PIN 1
100mV
200mV
20mV
50mV
DC mA DC mV
Input PIN 3 Input PIN 3
200mA
20mA
2mA
PIN 4 PIN 4
100mV
200mV
DC mA
20mV
50mV
DC mV
Input PIN 3 Input PIN 3
200mA
20mA
2mA
PIN 4 PIN 4
C3: 200mA DC with Excitation +24V D3: 100 mV DC with Excitation +24V
100mV
200mV
DC mA
20mV
50mV
DC mV
Input PIN 3 Input PIN 3
200mA
20mA
2mA
PIN 4 PIN 4
PIN 2
DC mV
Input PIN 3
Secondary PIN 3
1A PIN 4
J3
CT
PIN 4
DC current
Primary
C5: 5A DC
PIN 1 PMB-0052
PIN 2
Secondary PIN 3
5A
J3
CT
PIN 4
DC current
Primary
18
PM -1X30-W DC SIGNAL INPUT MODULE(0)
This section will elaborate how to adapt to different input signals in the PM series panel meter, by using the
correct jumper and using iSEL command. Panel meter series can accommodate 6 types of conventional input
signals, 20mA, 200mA, 5V, 10V, 20V, 200V, please refer below for setup.
17
PMB-0130 17
PMB-0130
EXC 24V EXC 24V
EXC 18 EXC 18
I Ch1 V
I Ch1 V
200mA
200mA
20mA
20mA
200V
10V
200V
20V
5V
20V
10V
5V
I n (w) 19 I n (w) 19
DC mA DC V
In (v) 20 In (v) 20
21 21
02: 0~20mA DC with Excitation +24V 06: 0~20V DC with Excitation +24V
17
PMB-0130 17
PMB-0130
EXC 24V EXC 24V
EXC 18 EXC 18
I Ch1 V
I Ch1 V
200mA
200mA
20mA
200V
10V
20mA
20V
200V
5V
20V
10V
5V
I n (w) 19 I n (w) 19
DC mA DC V
In (v) 20 In (v) 20
21 21
03: 0~200mA DC with Excitation +24V 07: 0~200V DC with Excitation +24V
PMB-0130 PMB-0130
EXC 24V 17 EXC 24V 17
EXC 18 EXC 18
I Ch1 V
I Ch1 V
200mA
20mA
200V
200mA
20V
10V
20mA
200V
10V
5V
20V
5V
I n (w) 19 I n (w) 19
DC mA DC V
In (v) 20 In (v) 20
21 21
PMB-0130
EXC 24V 17
EXC 18
I Ch1 V
200mA
20mA
200V
10V
20V
5V
I n (w) 19
DC V
In (v) 20
21
19
PM -1X30-W AC SIGNAL INPUT MODULE(AB)
This section will elaborate how to adapt to different input signals in the PM series panel meter, by using the
correct jumper and using iSEL command. Panel meter series can accommodate 6 types of conventional input
signals, 20mA, 200mA, 5V, 10V, 20V, 200V, please refer below for setup.
17 PMB-0152
17
PMB-0150
18
18 AC V
100mV
200mV
19
2V
200mA
20mA
2mA
AC mA 19 20
20 21
21
18
AC V 19
100mV
200mV
2V
17
PMB-0150
20
18 21
200mA
20mA
2mA
AC mA 19
20 B3: 0~2V AC RMS
21
17 PMB-0152
18
100mV
200mV
2V
AC V 19
A3: 0~200mA AC RMS 20
21
PMB-0150
17 B4: 0~20V AC RMS
18
PMB-0153
200mA
20mA
2mA
17
AC mA 19
18
20
AC V 19
21
1000V
200V
600V
20V
20
21
18
17
PMB-0151 AC V 19
20
1000V
200V
600V
20V
18
21
AC A 19
20
21
B6: 0~600V AC RMS
17
PMB-0153
20
21
17 PMB-0151
18
AC A 19 B7: 0~1000V AC RMS
20
17
PMB-0153
21
18
AC V 19
20
1000V
200V
600V
20V
21
20
PM -1X30-W DC SIGNAL INPUT MODULE(CDE)
This section will elaborate how to adapt to different input signals in the PM series panel meter, by using the
correct jumper and using iSEL command. Panel meter series can accommodate 6 types of conventional input
signals, 20mA, 200mA, 5V, 10V, 20V, 200V, please refer below for setup.
PMB-0134
PMB-0131 EXC 24V 17
EXC 24V 17
EXC 18
EXC 18
100mV
200mV
20mV
50mV
I n (w) 19
200mA
20mA
2mA
I n (w) 19 DC mV
DC mA In (v) 20
In (v) 20
21
21
EXC 18
100mV
200mV
20mV
50mV
PMB-0131 I n (w) 19
EXC 24V 17
DC mV
EXC 18 In (v) 20
21
I n (w) 19
200mA
20mA
2mA
DC mA
In (v) 20
EXC 18
100mV
200mV
20mV
50mV
I n (w) 19
C3: 0~K200mA DC with Excitation +24V DC mV
In (v) 20
21
DC mA
In (v) 20
EXC 24V 17
PMB-0134
21
EXC 18
100mV
200mV
20mV
50mV
I n (w) 19
DC mV
In (v) 20
21
20mA
200V
5mV
EXC 18 I n (w) 19
DC mV
I n (w) 19
In (v) 20
DC A
20 21
In (v) 21
20mA
200V
5mV
I n (w) 19
DC mV/V
EXC 24V 17
PMB-0132 In (v) 20
21
EXC 18
I n (w) 19
DC A
20 E3: 1/2/10/20/40mV/V (Option) with ISO 5V
In (v) 21
ISO 5V 17 PMB-0133
ISO 18
200mA
10mV
20mV
20mA
200V
5mV
I n (w) 19
DC mA
In (v) 20
21
21
PM-1X30-W TEMPERATURE SIGNAL INPUT MODULE
This section will elaborate how to adapt to different input signals in the PM series
panel meter, by using the correct jumper and using iSEL command. Panel meter
series can accommodate 6 types of conventional input signals, 20mA, 200mA, 5V,
10V, 20V, 200V, please refer below for setup.
Signal Input Module:
17
PMB-0153
18
A 19
b 20
B TC 21
RTD
17 PMB-0153
18
A 19
b 20
B TC 21
RTD
22
Global Network
Germany
China
U.S.
Taiwan U.S.
Singapore
China
FINE AUTOMATION CO., LTD. - Shanghai Factory
No.451 DuHui Rd, MinHang District, Shanghai,
China 201109
TEL: 86-21-6490-7260
FAX: 86-21-6490-7276
EMAIL: info.sh@fine-tek.com Distributor:
Singapore
FINETEK PTE LTD. - Singapore Office
No. 60 Kaki Bukit Place, #07-06 Eunos
Techpark 2 Lobby B, Singapore 415979
TEL: 65-6452-6340
FAX: 65-6734-1878
EMAIL: info.sg@fine-tek.com
08-PB-B1-EP, 01/21/2013