FTTH Network-Application of GEPON Outdoor Reserve PoE ONU

You might also like

Download as pdf or txt
Download as pdf or txt
You are on page 1of 3

FTTH Network: Application of GEPON

Outdoor Reserve PoE ONU


In order to meet the development demands of broadband, nowadays many
operators prefer deploying fiber to cable networks. However, it's difficult to access
electricity for ONU devices in corridors or outdoor when applying FTTB/FTTH. It's a
tricky problem in carrying out PON solutions under some special occasions such as
when renewing the old residentials, the power supply and backup is hard on many
occasions and the power is extremely unstable in the corridors, which results in high
ONU equipment failure, late maintenance, bad user experience.

For this problem, V-SOL has developed the outdoor reverse PoE ONU that can access
power with PSE in terminal users' houses.

Notes:
PoE (Power over Ethernet) is a technology that can not only transmit data signals for
some terminals based on IP such as VOIP telephone, wireless AP and IP camera but
also supply AC power for these devices. PoE is also called POL (Power over LAN) or
Active Ethernet.

1. Why choose outdoor reverse PoE ONU?


Main problems that PoE (PD) ONU can solve:
① Difficult to access the electricity in corridor and outdoor
② Users pay for the electricity, which saves operators' costs.

2. Application of outdoor reverse PoE ONU


Here is the application of V-SOL of the V280xPD series outdoor reverse PoE ONU.
As we can see, OLT upstream connects to the core network or switch and
downstream the optical splitter. Shown by the frame, there are three branches
issuing from the splitter, which means 3 applications with different ONT/ONU placed
on different occasions. The OLT, passive optical splitter and ONU consist of Passive
Optical Network (PON).

1. If the splitter connects to the general ONT set up on the users' house, it can
normally provide Triple Play Services including CATV, VoIP, and Internet
service when all conditions are perfect. The application is also called FTTH (Fiber to
the Home).

2. When there is no AC power in the corridors of the house or buildings, you can
install V-SOL outdoor reserve PoE ONU (V2810E-4PD/V2810G-4PD) in the corridors
uplinked to the splitter.

3. Similarly, if there is no current power outdoor when creating the fiber access
network, the outdoor reserve PoE ONU (V2808PD-ZE/V2808PD-ZG) can be set up
outdoor such as a telegraph pole on the road.

4. The ONU is powered by PSE(Power Sourcing Equipment) deployed in user's


house/buildings.

Features of V-SOL outdoor reverse PoE ONU:


- Compatible with OLT based on Broadcom/PMC/Cortina chipset.
- When pressing the RST button for over 3 seconds, ONU will restart and recover
from the factory default settings.
- Due to the devices being water-proof, they can be installed on outdoor walls, posts
and other places.
- The routers are easy to install and maintain, the applicable temperature range is
broad.
- Low power consumption, mute, high stability, environment friendly and energy
conservation.
- Plug and Play. Automatic detection, automatic configuration and automatic
firmware upgrade.

You might also like