Professional Documents
Culture Documents
شيت ماتريال 2
شيت ماتريال 2
Sheet (2)
1) State the seven different types of unit cells to create all crystal
systems
Answer
1-Cubic, 5-Hexagonal,
2- Tetragonal, 6-Monoclinic,
3- Orthorhombic, 7- and Triclinic
4-Rhombohedral
2) Calculate the axial length a and (APF) of iron with an atomic radius
R=0.124nm
3) Calculate the axial length a and (APF) of aluminum with an atomic
radius R = 0.143 nm
4) Define with drawing the point defects and line defects
5) What are factors effecting Material Properties
Answer
1-Sulfites,
2- Chlorine,
3- Oxygen in water,
4-Radiation, Pressure
6) What are benefits of heat treatment
1-increase Hardness
2-Increase Ductility
5-Decrease Brittleness
Hardening:
-Heating higher than its critical temperature then cooling rapidly.
, عملٌة تسخٌن الصلب إلى ما فوق درجة حرارته الحرجة بقلٌل ثم تبرٌده فجأة فً أي وسط مناسب )زٌت-
. هواء( و ذلك لزٌادة صالدة المعدن,ماء
-Improves hardness. -Increases internal stresses.
. زٌادة االجهادات الداخلٌة, تحسٌن الصالدة-
Normalizing :
It is similar to annealing, except that during cooling stage the material is cooled
at a faster rate than annealing usually outside the furnaces in air.
تسخٌن الصلب إلى ما فوق درجة حرارته الحرجة ثم تركه ٌبرد فى الهواء وهذا األمر ٌؤدي إلى تغٌٌر
.ًشكله البلوري الداخل
Tempering:
- Steel is heated below the critical temperature and cooled slowly.
تسخٌن الصلب المقسى إلى درجات مختلفة تحت درجة حرارته الحرجة ثم تبرٌده بهدف تقلٌل
.صالدته العالٌة و قصافته