Professional Documents
Culture Documents
LTC2410 Datasheet and Product Info - Analog Devices
LTC2410 Datasheet and Product Info - Analog Devices
The LTC2410 is a 2.7V to 5.5V micropower 24-bit differential ∆Σ analog to digital converter with an integrated oscillator, 2ppm INL and 0.16ppm
RMS noise. It uses delta-sigma technology and provides single cycle settling time for multiplexed applications. Through a single pin, the LTC2410
can be configured for better than 110dB input differential mode rejection at 50Hz or 60Hz ±2%, or it can be driven by an external oscillator for a
user defined rejection frequency. The internal oscillator requires no external frequency setting components.
The converter accepts any external differential reference voltage from 0.1V to VCC for flexible ratiometric and remote sensing measurement
configurations. The full-scale differential input range is from –0.5VREF to 0.5VREF. The reference common mode voltage, VREFCM, and the input
common mode voltage, VINCM, may be independently set anywhere within the GND to VCC range of the LTC2410. The DC common mode input
rejection is better than 140dB.
The LTC2410 communicates through a flexible 3-wire digital interface which is compatible with SPI and MICROWIRE protocols.
Applications
Direct Sensor Digitizer
Weight Scales
Direct Temperature Measurement
Gas Analyzers
Strain-Gauge Transducers
Instrumentation
Data Acquisition
Industrial Process Control
6-Digit DVMs
Product Categories
A/D Converters (ADC)
Single Channel A/D Converters
At least one model within this product family is in production and available for purchase. The product is appropriate for new designs but newer
alternatives may exist.
DC575A
DC575A: Demo Board for the LTC2410 24-Bit No Latency Delta Sigma ADC with Differential Input and Differential Reference.
Resources
DC575A - Demo Manual
DC575A - Schematic
Software
QuikEval
Documentation
View All (5) Data Sheets (1) Reliability Data (1) Application Notes (2) Evaluation Kit Manuals (1)
Data Sheets
LTC2410: 24-Bit No Latency Delta Sigma ADC with Differential Input and Differential Reference Data Sheet PDF
785.00K
Reliability Data
Application Notes
Product Recommendations
LTC2410 Companion Parts
Recommended µModule Isolator
LTM2883.
Reference Materials
View All (3) Product Selector Card (1) Technical Articles (2)
Technical Articles
Design Resources
ADI has always placed the highest emphasis on delivering products that meet the maximum levels of quality and reliability. We achieve this by
incorporating quality and reliability checks in every scope of product and process design, and in the manufacturing process as well. "Zero
defects" for shipped products is always our goal.
Price
Temp Packing Price Order from
Model Package Pins (100- RoHS
Range Qty (1000+) Analog Devices
499)
Production
Production
Select a country
The USA list pricing shown is for BUDGETARY USE ONLY, shown in United States dollars (FOB USA per unit for the stated volume), and is
subject to change. International prices may differ due to local duties, taxes, fees and exchange rates. For volume-specific price or delivery
quotes, please contact your local Analog Devices, Inc. sales office or authorized distributor. Pricing displayed for Evaluation Boards and Kits is
based on 1-piece pricing.
Evaluation Boards
Pricing displayed is based on 1-piece.
Model Description Price RoHS
Production
Select a country
Up to two boards can be purchased through Analog.com. To order more than two, please purchase through one of our listed distributors.
Pricing displayed is based on 1-piece. The USA list pricing shown is for budgetary use only, shown in United States dollars (FOB USA per unit),
and is subject to change. International prices may vary due to local duties, taxes, fees and exchange rates.