Professional Documents
Culture Documents
Basay Truss Text Output
Basay Truss Text Output
Modeling, Integrated Design & Analysis Software Print Date/Time : 11/30/2021 11:16
http://www.MidasUser.com
Gen 2019 - 1 / 42 -
PDF processed with CutePDF evaluation edition www.CutePDF.com
midas Gen ANALYSIS RESULTS OUTPUT
Modeling, Integrated Design & Analysis Software Print Date/Time : 11/30/2021 11:16
http://www.MidasUser.com
Gen 2019 - 2 / 42 -
midas Gen ANALYSIS RESULTS OUTPUT
cLCB47 Conc.Comb 1.000 x DL_1 + 1.000 x DL_2 + 0.750 x LL + 0.525 x EQX -ECC
cLCB48 Conc.Comb 1.000 x DL_1 + 1.000 x DL_2 + 0.750 x LL + 0.525 x EQY -ECC
cLCB49 Conc.Comb 1.000 x DL_1 + 1.000 x DL_2 + 0.750 x LL + -0.525 x EQX +ECC
cLCB50 Conc.Comb 1.000 x DL_1 + 1.000 x DL_2 + 0.750 x LL + -0.525 x EQY +ECC
cLCB51 Conc.Comb 1.000 x DL_1 + 1.000 x DL_2 + 0.750 x LL + -0.525 x EQX -ECC
cLCB52 Conc.Comb 1.000 x DL_1 + 1.000 x DL_2 + 0.750 x LL + -0.525 x EQY -ECC
cLCB53 Conc.Comb 0.600 x DL_1 + 0.600 x DL_2 + 0.600 x WX
cLCB54 Conc.Comb 0.600 x DL_1 + 0.600 x DL_2 + 0.600 x WY
cLCB55 Conc.Comb 0.600 x DL_1 + 0.600 x DL_2 + -0.600 x WX
cLCB56 Conc.Comb 0.600 x DL_1 + 0.600 x DL_2 + -0.600 x WY
cLCB57 Conc.Comb 0.600 x DL_1 + 0.600 x DL_2 + 0.700 x EQX +ECC
cLCB58 Conc.Comb 0.600 x DL_1 + 0.600 x DL_2 + 0.700 x EQY +ECC
cLCB59 Conc.Comb 0.600 x DL_1 + 0.600 x DL_2 + 0.700 x EQX -ECC
cLCB60 Conc.Comb 0.600 x DL_1 + 0.600 x DL_2 + 0.700 x EQY -ECC
cLCB61 Conc.Comb 0.600 x DL_1 + 0.600 x DL_2 + -0.700 x EQX +ECC
cLCB62 Conc.Comb 0.600 x DL_1 + 0.600 x DL_2 + -0.700 x EQY +ECC
cLCB63 Conc.Comb 0.600 x DL_1 + 0.600 x DL_2 + -0.700 x EQX -ECC
cLCB64 Conc.Comb 0.600 x DL_1 + 0.600 x DL_2 + -0.700 x EQY -ECC
fLCB1 Fdn.Comb 1.400 x DL_1 + 1.400 x DL_2
fLCB2 Fdn.Comb 1.200 x DL_1 + 1.200 x DL_2 + 1.600 x LL
fLCB3 Fdn.Comb 1.200 x DL_1 + 1.200 x DL_2 + 1.000 x WX + 0.500 x LL
fLCB4 Fdn.Comb 1.200 x DL_1 + 1.200 x DL_2 + 1.000 x WY + 0.500 x LL
fLCB5 Fdn.Comb 1.200 x DL_1 + 1.200 x DL_2 + -1.000 x WX + 0.500 x LL
fLCB6 Fdn.Comb 1.200 x DL_1 + 1.200 x DL_2 + -1.000 x WY + 0.500 x LL
fLCB7 Fdn.Comb 1.200 x DL_1 + 1.200 x DL_2 + 1.000 x EQX +ECC + 0.500 x LL
fLCB8 Fdn.Comb 1.200 x DL_1 + 1.200 x DL_2 + 1.000 x EQY +ECC + 0.500 x LL
fLCB9 Fdn.Comb 1.200 x DL_1 + 1.200 x DL_2 + 1.000 x EQX -ECC + 0.500 x LL
fLCB10 Fdn.Comb 1.200 x DL_1 + 1.200 x DL_2 + 1.000 x EQY -ECC + 0.500 x LL
fLCB11 Fdn.Comb 1.200 x DL_1 + 1.200 x DL_2 + -1.000 x EQX +ECC + 0.500 x LL
fLCB12 Fdn.Comb 1.200 x DL_1 + 1.200 x DL_2 + -1.000 x EQY +ECC + 0.500 x LL
fLCB13 Fdn.Comb 1.200 x DL_1 + 1.200 x DL_2 + -1.000 x EQX -ECC + 0.500 x LL
fLCB14 Fdn.Comb 1.200 x DL_1 + 1.200 x DL_2 + -1.000 x EQY -ECC + 0.500 x LL
fLCB15 Fdn.Comb 1.200 x DL_1 + 1.200 x DL_2 + 1.000 x RSX + 0.500 x LL
fLCB16 Fdn.Comb 1.200 x DL_1 + 1.200 x DL_2 + 1.000 x RSY + 0.500 x LL
fLCB17 Fdn.Comb 1.200 x DL_1 + 1.200 x DL_2 + -1.000 x RSX + 0.500 x LL
fLCB18 Fdn.Comb 1.200 x DL_1 + 1.200 x DL_2 + -1.000 x RSY + 0.500 x LL
fLCB19 Fdn.Comb 0.900 x DL_1 + 0.900 x DL_2 + 1.000 x WX
fLCB20 Fdn.Comb 0.900 x DL_1 + 0.900 x DL_2 + 1.000 x WY
fLCB21 Fdn.Comb 0.900 x DL_1 + 0.900 x DL_2 + -1.000 x WX
fLCB22 Fdn.Comb 0.900 x DL_1 + 0.900 x DL_2 + -1.000 x WY
fLCB23 Fdn.Comb 0.900 x DL_1 + 0.900 x DL_2 + 1.000 x EQX +ECC
fLCB24 Fdn.Comb 0.900 x DL_1 + 0.900 x DL_2 + 1.000 x EQY +ECC
fLCB25 Fdn.Comb 0.900 x DL_1 + 0.900 x DL_2 + 1.000 x EQX -ECC
fLCB26 Fdn.Comb 0.900 x DL_1 + 0.900 x DL_2 + 1.000 x EQY -ECC
fLCB27 Fdn.Comb 0.900 x DL_1 + 0.900 x DL_2 + -1.000 x EQX +ECC
fLCB28 Fdn.Comb 0.900 x DL_1 + 0.900 x DL_2 + -1.000 x EQY +ECC
fLCB29 Fdn.Comb 0.900 x DL_1 + 0.900 x DL_2 + -1.000 x EQX -ECC
fLCB30 Fdn.Comb 0.900 x DL_1 + 0.900 x DL_2 + -1.000 x EQY -ECC
fLCB31 Fdn.Comb 0.900 x DL_1 + 0.900 x DL_2 + 1.000 x RSX
fLCB32 Fdn.Comb 0.900 x DL_1 + 0.900 x DL_2 + 1.000 x RSY
fLCB33 Fdn.Comb 0.900 x DL_1 + 0.900 x DL_2 + -1.000 x RSX
fLCB34 Fdn.Comb 0.900 x DL_1 + 0.900 x DL_2 + -1.000 x RSY
fLCB35 Fdn.Comb 1.000 x DL_1 + 1.000 x DL_2
fLCB36 Fdn.Comb 1.000 x DL_1 + 1.000 x DL_2 + 1.000 x LL
fLCB37 Fdn.Comb 1.000 x DL_1 + 1.000 x DL_2 + 0.600 x WX
fLCB38 Fdn.Comb 1.000 x DL_1 + 1.000 x DL_2 + 0.600 x WY
fLCB39 Fdn.Comb 1.000 x DL_1 + 1.000 x DL_2 + -0.600 x WX
fLCB40 Fdn.Comb 1.000 x DL_1 + 1.000 x DL_2 + -0.600 x WY
fLCB41 Fdn.Comb 1.000 x DL_1 + 1.000 x DL_2 + 0.700 x EQX +ECC
fLCB42 Fdn.Comb 1.000 x DL_1 + 1.000 x DL_2 + 0.700 x EQY +ECC
fLCB43 Fdn.Comb 1.000 x DL_1 + 1.000 x DL_2 + 0.700 x EQX -ECC
fLCB44 Fdn.Comb 1.000 x DL_1 + 1.000 x DL_2 + 0.700 x EQY -ECC
fLCB45 Fdn.Comb 1.000 x DL_1 + 1.000 x DL_2 + -0.700 x EQX +ECC
fLCB46 Fdn.Comb 1.000 x DL_1 + 1.000 x DL_2 + -0.700 x EQY +ECC
fLCB47 Fdn.Comb 1.000 x DL_1 + 1.000 x DL_2 + -0.700 x EQX -ECC
fLCB48 Fdn.Comb 1.000 x DL_1 + 1.000 x DL_2 + -0.700 x EQY -ECC
fLCB49 Fdn.Comb 1.000 x DL_1 + 1.000 x DL_2 + 0.700 x RSX
fLCB50 Fdn.Comb 1.000 x DL_1 + 1.000 x DL_2 + 0.700 x RSY
fLCB51 Fdn.Comb 1.000 x DL_1 + 1.000 x DL_2 + -0.700 x RSX
fLCB52 Fdn.Comb 1.000 x DL_1 + 1.000 x DL_2 + -0.700 x RSY
fLCB53 Fdn.Comb 1.000 x DL_1 + 1.000 x DL_2 + 0.450 x WX + 0.750 x LL
fLCB54 Fdn.Comb 1.000 x DL_1 + 1.000 x DL_2 + 0.450 x WY + 0.750 x LL
fLCB55 Fdn.Comb 1.000 x DL_1 + 1.000 x DL_2 + -0.450 x WX + 0.750 x LL
fLCB56 Fdn.Comb 1.000 x DL_1 + 1.000 x DL_2 + -0.450 x WY + 0.750 x LL
fLCB57 Fdn.Comb 1.000 x DL_1 + 1.000 x DL_2 + 0.750 x LL + 0.525 x EQX +ECC
fLCB58 Fdn.Comb 1.000 x DL_1 + 1.000 x DL_2 + 0.750 x LL + 0.525 x EQY +ECC
fLCB59 Fdn.Comb 1.000 x DL_1 + 1.000 x DL_2 + 0.750 x LL + 0.525 x EQX -ECC
fLCB60 Fdn.Comb 1.000 x DL_1 + 1.000 x DL_2 + 0.750 x LL + 0.525 x EQY -ECC
Modeling, Integrated Design & Analysis Software Print Date/Time : 11/30/2021 11:16
http://www.MidasUser.com
Gen 2019 - 3 / 42 -
midas Gen ANALYSIS RESULTS OUTPUT
fLCB61 Fdn.Comb 1.000 x DL_1 + 1.000 x DL_2 + 0.750 x LL + -0.525 x EQX +ECC
fLCB62 Fdn.Comb 1.000 x DL_1 + 1.000 x DL_2 + 0.750 x LL + -0.525 x EQY +ECC
fLCB63 Fdn.Comb 1.000 x DL_1 + 1.000 x DL_2 + 0.750 x LL + -0.525 x EQX -ECC
fLCB64 Fdn.Comb 1.000 x DL_1 + 1.000 x DL_2 + 0.750 x LL + -0.525 x EQY -ECC
fLCB65 Fdn.Comb 1.000 x DL_1 + 1.000 x DL_2 + 0.750 x LL + 0.525 x RSX
fLCB66 Fdn.Comb 1.000 x DL_1 + 1.000 x DL_2 + 0.750 x LL + 0.525 x RSY
fLCB67 Fdn.Comb 1.000 x DL_1 + 1.000 x DL_2 + 0.750 x LL + -0.525 x RSX
fLCB68 Fdn.Comb 1.000 x DL_1 + 1.000 x DL_2 + 0.750 x LL + -0.525 x RSY
fLCB69 Fdn.Comb 0.600 x DL_1 + 0.600 x DL_2 + 0.600 x WX
fLCB70 Fdn.Comb 0.600 x DL_1 + 0.600 x DL_2 + 0.600 x WY
fLCB71 Fdn.Comb 0.600 x DL_1 + 0.600 x DL_2 + -0.600 x WX
fLCB72 Fdn.Comb 0.600 x DL_1 + 0.600 x DL_2 + -0.600 x WY
fLCB73 Fdn.Comb 0.600 x DL_1 + 0.600 x DL_2 + 0.700 x EQX +ECC
fLCB74 Fdn.Comb 0.600 x DL_1 + 0.600 x DL_2 + 0.700 x EQY +ECC
fLCB75 Fdn.Comb 0.600 x DL_1 + 0.600 x DL_2 + 0.700 x EQX -ECC
fLCB76 Fdn.Comb 0.600 x DL_1 + 0.600 x DL_2 + 0.700 x EQY -ECC
fLCB77 Fdn.Comb 0.600 x DL_1 + 0.600 x DL_2 + -0.700 x EQX +ECC
fLCB78 Fdn.Comb 0.600 x DL_1 + 0.600 x DL_2 + -0.700 x EQY +ECC
fLCB79 Fdn.Comb 0.600 x DL_1 + 0.600 x DL_2 + -0.700 x EQX -ECC
fLCB80 Fdn.Comb 0.600 x DL_1 + 0.600 x DL_2 + -0.700 x EQY -ECC
fLCB81 Fdn.Comb 0.600 x DL_1 + 0.600 x DL_2 + 0.700 x RSX
fLCB82 Fdn.Comb 0.600 x DL_1 + 0.600 x DL_2 + 0.700 x RSY
fLCB83 Fdn.Comb 0.600 x DL_1 + 0.600 x DL_2 + -0.700 x RSX
fLCB84 Fdn.Comb 0.600 x DL_1 + 0.600 x DL_2 + -0.700 x RSY
____________________________________________________________________________________________________
BEAM ELEMENT FORCES & MOMENTS MIN/MAX SUMMARY BY PROPERTY PRINTOUT Unit System : kN , m
____________________________________________________________________
** MIN
** MIN
Modeling, Integrated Design & Analysis Software Print Date/Time : 11/30/2021 11:16
http://www.MidasUser.com
Gen 2019 - 4 / 42 -
midas Gen ANALYSIS RESULTS OUTPUT
** MIN
** MIN
** MIN
Modeling, Integrated Design & Analysis Software Print Date/Time : 11/30/2021 11:16
http://www.MidasUser.com
Gen 2019 - 5 / 42 -
midas Gen ANALYSIS RESULTS OUTPUT
** MIN
** MIN
** MIN
Modeling, Integrated Design & Analysis Software Print Date/Time : 11/30/2021 11:16
http://www.MidasUser.com
Gen 2019 - 6 / 42 -
midas Gen ANALYSIS RESULTS OUTPUT
** MIN
** MIN
** MIN
Modeling, Integrated Design & Analysis Software Print Date/Time : 11/30/2021 11:16
http://www.MidasUser.com
Gen 2019 - 7 / 42 -
midas Gen ANALYSIS RESULTS OUTPUT
** MAX
** MIN
** MIN
** MIN
Modeling, Integrated Design & Analysis Software Print Date/Time : 11/30/2021 11:16
http://www.MidasUser.com
Gen 2019 - 8 / 42 -
midas Gen ANALYSIS RESULTS OUTPUT
------ --- ---------------- --- ---------- ---------- ---------- --------- --------- --------- --------
85 AXL sLCB73 1 J -23.7 -3.6 29.4 -0.4 -53.7 8.6 4.00
81 SHY sLCB27 1 I -53.2 21.9 -1.7 -0.2 -3.1 46.8 4.00
85 SHZ sLCB8 1 I -72.3 -7.2 44.4 -0.7 97.2 -12.2 4.00
85 TOR sLCB29 1 I -54.1 18.8 -3.7 0.4 -4.2 39.6 4.00
81 MTY cLCB9 1 I -295.9 -41.2 44.0 -1.3 97.8 -71.5 4.00
85 MTZ cLCB8 1 J -247.7 -68.7 7.7 -0.8 -7.5 143.8 4.00
** MIN
** MIN
** MIN
Modeling, Integrated Design & Analysis Software Print Date/Time : 11/30/2021 11:16
http://www.MidasUser.com
Gen 2019 - 9 / 42 -
midas Gen ANALYSIS RESULTS OUTPUT
14058 SHZ cLCB2 1 J -124.8 -38.3 61.7 4.4 -86.6 70.6 3.00
14058 TOR cLCB2 1 J -124.8 -38.3 61.7 4.4 -86.6 70.6 3.00
14058 MTY cLCB2 1 I -132.4 -38.3 61.7 4.4 98.5 -44.2 3.00
14058 MTZ cLCB2 1 J -124.8 -38.3 61.7 4.4 -86.6 70.6 3.00
** MIN
** MIN
** MIN
Modeling, Integrated Design & Analysis Software Print Date/Time : 11/30/2021 11:16
http://www.MidasUser.com
Gen 2019 - 10 / 42 -
midas Gen ANALYSIS RESULTS OUTPUT
132 MTZ sLCB1 1 I 0.0 0.0 -63.2 33.2 -89.3 0.0 3.40
** MIN
** MIN
** MIN
** MIN
Modeling, Integrated Design & Analysis Software Print Date/Time : 11/30/2021 11:16
http://www.MidasUser.com
Gen 2019 - 11 / 42 -
midas Gen ANALYSIS RESULTS OUTPUT
** MIN
** MIN
** MIN
Modeling, Integrated Design & Analysis Software Print Date/Time : 11/30/2021 11:16
http://www.MidasUser.com
Gen 2019 - 12 / 42 -
midas Gen ANALYSIS RESULTS OUTPUT
133 AXL cLCB2 1 I 0.0 0.0 -512.9 25.4 -668.8 0.0 2.83
148 SHY cLCB2 1 I 0.0 0.0 -198.8 130.6 -204.2 0.0 1.98
133 SHZ cLCB2 1 I 0.0 0.0 -512.9 25.4 -668.8 0.0 2.83
112 TOR cLCB13 1 I 0.0 0.0 -200.4 -85.2 -273.0 0.0 3.75
133 MTY cLCB2 1 I 0.0 0.0 -512.9 25.4 -668.8 0.0 2.83
110 MTZ sLCB1 1 I 0.0 0.0 -35.8 -5.7 -33.2 0.0 3.20
** MIN
** MIN
** MIN
Modeling, Integrated Design & Analysis Software Print Date/Time : 11/30/2021 11:16
http://www.MidasUser.com
Gen 2019 - 13 / 42 -
midas Gen ANALYSIS RESULTS OUTPUT
15131 TOR cLCB9 1 I 0.0 0.0 -43.0 -16.7 -1.4 0.0 0.50
166 MTY cLCB2 1 J 0.0 0.0 112.1 -3.9 -215.0 0.0 6.80
165 MTZ sLCB1 1 I 0.0 0.0 -19.6 3.2 -31.4 0.0 6.80
** MIN
** MIN
** MIN
Modeling, Integrated Design & Analysis Software Print Date/Time : 11/30/2021 11:16
http://www.MidasUser.com
Gen 2019 - 14 / 42 -
midas Gen ANALYSIS RESULTS OUTPUT
** MIN
** MIN
** MIN
Modeling, Integrated Design & Analysis Software Print Date/Time : 11/30/2021 11:16
http://www.MidasUser.com
Gen 2019 - 15 / 42 -
midas Gen ANALYSIS RESULTS OUTPUT
** MIN
** MIN
** MIN
Modeling, Integrated Design & Analysis Software Print Date/Time : 11/30/2021 11:16
http://www.MidasUser.com
Gen 2019 - 16 / 42 -
midas Gen ANALYSIS RESULTS OUTPUT
** MIN
** MIN
** MIN
Modeling, Integrated Design & Analysis Software Print Date/Time : 11/30/2021 11:16
http://www.MidasUser.com
Gen 2019 - 17 / 42 -
midas Gen ANALYSIS RESULTS OUTPUT
396 SHY cLCB11 1 I 0.0 0.0 8.5 18.4 40.5 0.0 4.40
407 SHZ cLCB2 1 J 0.0 0.0 146.1 2.3 -205.8 0.0 6.40
396 TOR cLCB11 1 J 0.0 0.0 27.2 18.4 -38.1 0.0 4.40
395 MTY cLCB2 1 J 0.0 0.0 -29.9 -12.8 57.8 0.0 3.00
375 MTZ sLCB1 1 I 0.0 0.0 -12.2 -2.7 -11.7 0.0 4.36
** MIN
** MIN
** MIN
Modeling, Integrated Design & Analysis Software Print Date/Time : 11/30/2021 11:16
http://www.MidasUser.com
Gen 2019 - 18 / 42 -
midas Gen ANALYSIS RESULTS OUTPUT
12261 MTY cLCB2 1 J 0.0 0.0 -176.8 31.7 261.9 0.0 2.80
315 MTZ sLCB1 1 I 0.0 0.0 -62.0 9.4 -158.2 0.0 3.60
** MIN
** MIN
** MIN
Modeling, Integrated Design & Analysis Software Print Date/Time : 11/30/2021 11:16
http://www.MidasUser.com
Gen 2019 - 19 / 42 -
midas Gen ANALYSIS RESULTS OUTPUT
** MIN
** MIN
** MIN
** MIN
Modeling, Integrated Design & Analysis Software Print Date/Time : 11/30/2021 11:16
http://www.MidasUser.com
Gen 2019 - 20 / 42 -
midas Gen ANALYSIS RESULTS OUTPUT
------ --- ---------------- --- ---------- ---------- ---------- --------- --------- --------- --------
423 AXL cLCB2 1 I -155.3 -13.9 -286.1 -5.7 -393.8 -30.6 1.69
705 SHY cLCB2 1 I 101.6 -323.7 461.1 -61.1 52.3 -74.9 0.27
423 SHZ cLCB2 1 I -155.3 -13.9 -286.1 -5.7 -393.8 -30.6 1.69
729 TOR cLCB2 1 I 264.5 -151.4 75.8 -68.2 60.3 -106.2 0.21
423 MTY cLCB2 1 I -155.3 -13.9 -286.1 -5.7 -393.8 -30.6 1.69
737 MTZ cLCB2 1 J 265.3 38.6 -6.5 -54.6 55.2 -107.5 2.95
** MIN
** MIN
** MIN
Modeling, Integrated Design & Analysis Software Print Date/Time : 11/30/2021 11:16
http://www.MidasUser.com
Gen 2019 - 21 / 42 -
midas Gen ANALYSIS RESULTS OUTPUT
444 SHZ cLCB2 1 I 74.6 65.5 -95.9 27.2 -266.7 111.2 3.48
446 TOR cLCB2 1 I 272.5 -74.5 -43.7 -100.8 -112.0 -136.3 2.98
444 MTY cLCB2 1 I 74.6 65.5 -95.9 27.2 -266.7 111.2 3.48
446 MTZ cLCB2 1 I 272.5 -74.5 -43.7 -100.8 -112.0 -136.3 2.98
** MIN
** MAX
** MIN
** MIN
Modeling, Integrated Design & Analysis Software Print Date/Time : 11/30/2021 11:16
http://www.MidasUser.com
Gen 2019 - 22 / 42 -
midas Gen ANALYSIS RESULTS OUTPUT
------ --- ---------------- --- --------- --------- --------- --------- --------- --------- ---------
31 AXL cLCB2 1 I -4204.5 -19.4 -51.9 412.1 -412.1 307.9 -307.9
31 SHY cLCB10 1 I -3526.9 -292.1 98.4 5662.0 -5662.0 -2838.9 2838.9
26 SHZ cLCB13 1 I -3258.5 -58.3 -407.8 2010.1 -2010.1 7665.5 -7665.5
31 BY+ sLCB13 1 I -995.3 374.5 -143.9 -5913.1 5913.1 3105.3 -3105.3
26 BY- cLCB10 1 I -3356.8 -261.9 32.2 5918.8 -5918.8 -2189.6 2189.6
31 BZ+ sLCB24 1 I -745.7 188.1 327.5 -2411.2 2411.2 -7053.6 7053.6
26 BZ- cLCB13 1 I -3258.5 -58.3 -407.8 2010.1 -2010.1 7665.5 -7665.5
** MIN
** MIN
Modeling, Integrated Design & Analysis Software Print Date/Time : 11/30/2021 11:16
http://www.MidasUser.com
Gen 2019 - 23 / 42 -
midas Gen ANALYSIS RESULTS OUTPUT
** MIN
** MIN
** MIN
Modeling, Integrated Design & Analysis Software Print Date/Time : 11/30/2021 11:16
http://www.MidasUser.com
Gen 2019 - 24 / 42 -
midas Gen ANALYSIS RESULTS OUTPUT
** MIN
** MIN
** MIN
Modeling, Integrated Design & Analysis Software Print Date/Time : 11/30/2021 11:16
http://www.MidasUser.com
Gen 2019 - 25 / 42 -
midas Gen ANALYSIS RESULTS OUTPUT
11684 SHZ cLCB13 1 I -85.7 30.1 1451.5 -227.6 227.6 -7326.7 7326.7
11680 BY+ cLCB2 1 J -542.9 122.3 25.4 3625.3 -3625.3 645.4 -645.4
11684 BY- cLCB8 1 I -139.4 569.1 581.6 -3008.5 3008.5 -2913.4 2913.4
11918 BZ+ cLCB9 1 J -30.3 142.2 925.5 744.8 -744.8 4706.4 -4706.4
11684 BZ- cLCB13 1 I -85.7 30.1 1451.5 -227.6 227.6 -7326.7 7326.7
** MIN
** MIN
** MIN
Modeling, Integrated Design & Analysis Software Print Date/Time : 11/30/2021 11:16
http://www.MidasUser.com
Gen 2019 - 26 / 42 -
midas Gen ANALYSIS RESULTS OUTPUT
------ --- ---------------- --- --------- --------- --------- --------- --------- --------- ---------
48 AXL sLCB72 1 J -46.0 -215.9 -99.6 -710.4 710.4 104.6 -104.6
53 SHY cLCB2 1 I -1300.9 931.7 83.6 -22344.6 22344.6 -3429.5 3429.5
56 SHZ cLCB2 1 I -1909.3 -609.5 1942.2 13714.2 -13714.2 -29742.0 29742.0
53 BY+ cLCB2 1 J -1144.4 931.7 83.6 18901.7 -18901.7 271.7 -271.7
53 BY- cLCB2 1 I -1300.9 931.7 83.6 -22344.6 22344.6 -3429.5 3429.5
48 BZ+ cLCB2 1 I -1555.7 -1012.7 -1528.1 18067.2 -18067.2 20189.7 -20189.7
56 BZ- cLCB2 1 I -1909.3 -609.5 1942.2 13714.2 -13714.2 -29742.0 29742.0
** MIN
** MIN
** MIN
Modeling, Integrated Design & Analysis Software Print Date/Time : 11/30/2021 11:16
http://www.MidasUser.com
Gen 2019 - 27 / 42 -
midas Gen ANALYSIS RESULTS OUTPUT
** MAX
** MIN
** MIN
** MIN
Modeling, Integrated Design & Analysis Software Print Date/Time : 11/30/2021 11:16
http://www.MidasUser.com
Gen 2019 - 28 / 42 -
midas Gen ANALYSIS RESULTS OUTPUT
** MIN
** MIN
** MIN
Modeling, Integrated Design & Analysis Software Print Date/Time : 11/30/2021 11:16
http://www.MidasUser.com
Gen 2019 - 29 / 42 -
midas Gen ANALYSIS RESULTS OUTPUT
206 BZ+ cLCB2 1 I 0.0 0.0 822.1 0.0 0.0 -15897.6 15897.6
172 BZ- cLCB2 1 J 0.0 0.0 1700.0 0.0 0.0 19444.4 -19444.4
** MIN
** MIN
** MIN
Modeling, Integrated Design & Analysis Software Print Date/Time : 11/30/2021 11:16
http://www.MidasUser.com
Gen 2019 - 30 / 42 -
midas Gen ANALYSIS RESULTS OUTPUT
11658 SHZ cLCB2 1 I 0.0 0.0 -1382.8 0.0 0.0 23521.3 -23521.3
135 BY+ sLCB1 1 I 0.0 0.0 -56.0 0.0 0.0 209.6 -209.6
135 BY- sLCB1 1 I 0.0 0.0 -56.0 0.0 0.0 209.6 -209.6
204 BZ+ cLCB2 1 I 0.0 0.0 1098.2 0.0 0.0 -11426.8 11426.8
11658 BZ- cLCB2 1 I 0.0 0.0 -1382.8 0.0 0.0 23521.3 -23521.3
** MIN
** MIN
** MIN
Modeling, Integrated Design & Analysis Software Print Date/Time : 11/30/2021 11:16
http://www.MidasUser.com
Gen 2019 - 31 / 42 -
midas Gen ANALYSIS RESULTS OUTPUT
------ --- ---------------- --- --------- --------- --------- --------- --------- --------- ---------
133 AXL cLCB2 1 I 0.0 0.0 -3381.6 0.0 0.0 27134.6 -27134.6
110 SHY sLCB1 1 I 0.0 0.0 -236.3 0.0 0.0 1346.0 -1346.0
133 SHZ cLCB2 1 I 0.0 0.0 -3381.6 0.0 0.0 27134.6 -27134.6
110 BY+ sLCB1 1 I 0.0 0.0 -236.3 0.0 0.0 1346.0 -1346.0
110 BY- sLCB1 1 I 0.0 0.0 -236.3 0.0 0.0 1346.0 -1346.0
133 BZ+ cLCB2 1 J 0.0 0.0 -2595.0 0.0 0.0 -24907.3 24907.3
133 BZ- cLCB2 1 I 0.0 0.0 -3381.6 0.0 0.0 27134.6 -27134.6
** MIN
** MIN
Modeling, Integrated Design & Analysis Software Print Date/Time : 11/30/2021 11:16
http://www.MidasUser.com
Gen 2019 - 32 / 42 -
midas Gen ANALYSIS RESULTS OUTPUT
** MIN
** MIN
** MIN
Modeling, Integrated Design & Analysis Software Print Date/Time : 11/30/2021 11:16
http://www.MidasUser.com
Gen 2019 - 33 / 42 -
midas Gen ANALYSIS RESULTS OUTPUT
127 BZ+ cLCB2 1 I 0.0 0.0 -564.7 0.0 0.0 6177.8 -6177.8
15647 BZ- cLCB2 1 I 0.0 0.0 88.4 0.0 0.0 -5104.3 5104.3
** MIN
** MIN
** MIN
Modeling, Integrated Design & Analysis Software Print Date/Time : 11/30/2021 11:16
http://www.MidasUser.com
Gen 2019 - 34 / 42 -
midas Gen ANALYSIS RESULTS OUTPUT
15133 SHZ cLCB9 1 J 0.0 0.0 791.9 0.0 0.0 5151.0 -5151.0
119 BY+ sLCB1 1 I 0.0 0.0 58.6 0.0 0.0 -261.1 261.1
119 BY- sLCB1 1 I 0.0 0.0 58.6 0.0 0.0 -261.1 261.1
183 BZ+ cLCB2 1 I 0.0 0.0 -3662.7 0.0 0.0 32588.3 -32588.3
183 BZ- cLCB2 1 J 0.0 0.0 -3320.6 0.0 0.0 -23278.5 23278.5
** MIN
** MIN
** MIN
Modeling, Integrated Design & Analysis Software Print Date/Time : 11/30/2021 11:16
http://www.MidasUser.com
Gen 2019 - 35 / 42 -
midas Gen ANALYSIS RESULTS OUTPUT
------ --- ---------------- --- --------- --------- --------- --------- --------- --------- ---------
412 AXL cLCB11 1 I 0.0 0.0 -1395.5 0.0 0.0 12215.9 -12215.9
376 SHY sLCB1 1 I 0.0 0.0 -162.9 0.0 0.0 1207.3 -1207.3
412 SHZ sLCB22 1 J 0.0 0.0 730.2 0.0 0.0 6071.8 -6071.8
376 BY+ sLCB1 1 I 0.0 0.0 -162.9 0.0 0.0 1207.3 -1207.3
376 BY- sLCB1 1 I 0.0 0.0 -162.9 0.0 0.0 1207.3 -1207.3
412 BZ+ cLCB11 1 I 0.0 0.0 -1395.5 0.0 0.0 12215.9 -12215.9
412 BZ- cLCB11 1 J 0.0 0.0 -1181.9 0.0 0.0 -8775.1 8775.1
** MIN
** MIN
** MIN
Modeling, Integrated Design & Analysis Software Print Date/Time : 11/30/2021 11:16
http://www.MidasUser.com
Gen 2019 - 36 / 42 -
midas Gen ANALYSIS RESULTS OUTPUT
** MAX
** MIN
** MIN
** MIN
Modeling, Integrated Design & Analysis Software Print Date/Time : 11/30/2021 11:16
http://www.MidasUser.com
Gen 2019 - 37 / 42 -
midas Gen ANALYSIS RESULTS OUTPUT
** MIN
** MIN
** MIN
Modeling, Integrated Design & Analysis Software Print Date/Time : 11/30/2021 11:16
http://www.MidasUser.com
Gen 2019 - 38 / 42 -
midas Gen ANALYSIS RESULTS OUTPUT
340 BZ+ cLCB2 1 I 0.0 0.0 1693.5 0.0 0.0 -24261.2 24261.2
340 BZ- cLCB2 1 J 0.0 0.0 2669.2 0.0 0.0 38561.3 -38561.3
** MIN
** MIN
** MIN
Modeling, Integrated Design & Analysis Software Print Date/Time : 11/30/2021 11:16
http://www.MidasUser.com
Gen 2019 - 39 / 42 -
midas Gen ANALYSIS RESULTS OUTPUT
454 SHZ cLCB2 1 I 207.5 57.8 -991.4 279.4 -279.4 5806.8 -5806.8
455 BY+ cLCB9 1 I 730.7 140.4 1019.7 -2100.3 2100.3 -4834.3 4834.3
7124 BY- cLCB7 1 J 227.4 155.4 1121.7 2314.3 -2314.3 3527.0 -3527.0
3739 BZ+ cLCB2 1 J 357.8 -15.3 -319.1 -123.8 123.8 -6566.5 6566.5
7124 BZ- cLCB8 1 J -553.8 79.8 2182.6 881.7 -881.7 8355.2 -8355.2
** MIN
** MIN
** MIN
Modeling, Integrated Design & Analysis Software Print Date/Time : 11/30/2021 11:16
http://www.MidasUser.com
Gen 2019 - 40 / 42 -
midas Gen ANALYSIS RESULTS OUTPUT
------ --- ---------------- --- --------- --------- --------- --------- --------- --------- ---------
7384 AXL cLCB2 1 J -1940.3 646.2 630.4 12332.1 -12332.1 979.8 -979.8
431 SHY cLCB2 1 I 927.3 -2853.4 -1897.4 9766.6 -9766.6 14523.0 -14523.0
440 SHZ cLCB2 1 I 1002.3 -1935.4 -2083.5 3687.2 -3687.2 -10974.4 10974.4
439 BY+ cLCB2 1 J 713.4 -1607.4 1413.9 -22633.9 22633.9 14388.2 -14388.2
439 BY- cLCB2 1 I 713.4 -1607.4 1320.6 24516.8 -24516.8 -9675.6 9675.6
440 BZ+ cLCB2 1 J 1002.3 -1935.4 -2078.3 506.8 -506.8 -13026.1 13026.1
442 BZ- cLCB2 1 I 1731.0 -473.8 -1798.4 11115.6 -11115.6 21912.9 -21912.9
** MIN
** MIN
Modeling, Integrated Design & Analysis Software Print Date/Time : 11/30/2021 11:16
http://www.MidasUser.com
Gen 2019 - 41 / 42 -
midas Gen ANALYSIS RESULTS OUTPUT
** MIN
** MAX
** MIN
Modeling, Integrated Design & Analysis Software Print Date/Time : 11/30/2021 11:16
http://www.MidasUser.com
Gen 2019 - 42 / 42 -
midas Gen MODEL DATA PROFILE
Modeling, Integrated Design & Analysis Software Print Date/Time : 11/30/2021 11:17
http://www.MidasUser.com
Gen 2019 - 1 / 24 -
midas Gen MODEL DATA PROFILE
Modeling, Integrated Design & Analysis Software Print Date/Time : 11/30/2021 11:17
http://www.MidasUser.com
Gen 2019 - 2 / 24 -
midas Gen MODEL DATA PROFILE
24 *********~
25 C6 500x50~ 1.00 1.00 1.00 1.00 0.70 0.70 1.00
26 C6 500x50~ 1.00 1.00 1.00 1.00 0.70 0.70 1.00
29 *********~
30 C7 400x40~ 1.00 1.00 1.00 1.00 0.70 0.70 1.00
31 C7 400x40~ 1.00 1.00 1.00 1.00 0.70 0.70 1.00
40 HSS4X.250 1.00 1.00 1.00 1.00 0.70 0.70 1.00
42 C20 1.00 1.00 1.00 1.00 0.70 0.70 1.00
43 PC1 400x4~ 1.00 1.00 1.00 1.00 0.70 0.70 1.00
44 PC2 300x3~ 1.00 1.00 1.00 1.00 0.70 0.70 1.00
45 PC3 400x4~ 1.00 1.00 1.00 1.00 0.70 0.70 1.00
47 *********~
60 2B1 1000x~ 1.00 1.00 1.00 1.00 0.35 1.00 1.00
61 2B2 800x5~ 1.00 1.00 1.00 1.00 0.35 1.00 1.00
62 2B3 800x4~ 1.00 1.00 1.00 1.00 0.35 1.00 1.00
63 2B4 750x4~ 1.00 1.00 1.00 1.00 0.35 1.00 1.00
64 2B5 750x4~ 1.00 1.00 1.00 1.00 1.00 1.00 1.00
65 2B6 700x3~ 1.00 1.00 1.00 1.00 0.35 1.00 1.00
66 2B7 650x4~ 1.00 1.00 1.00 1.00 0.35 1.00 1.00
67 2B8 650x3~ 1.00 1.00 1.00 1.00 0.35 1.00 1.00
68 2B9 650x3~ 1.00 1.00 1.00 1.00 0.35 1.00 1.00
69 2B10 600x~ 1.00 1.00 1.00 1.00 0.35 1.00 1.00
70 2B11 500x~ 1.00 1.00 1.00 1.00 0.35 1.00 1.00
71 2B12 500x~ 1.00 1.00 1.00 1.00 0.35 1.00 1.00
72 2B13 450x~
73 2B14 750x~
79 *********
80 2CB1 600x~ 1.00 1.00 1.00 1.00 0.35 1.00 1.00
81 2CB2 650x~ 1.00 1.00 1.00 1.00 0.35 1.00 1.00
82 2CB3 500x~ 1.00 1.00 1.00 1.00 0.35 1.00 1.00
83 2CB4 450x~ 1.00 1.00 1.00 1.00 0.35 1.00 1.00
89 *********~
90 3B1 800x4~ 1.00 1.00 1.00 1.00 0.35 1.00 1.00
91 3B2 750x4~ 1.00 1.00 1.00 1.00 0.35 1.00 1.00
92 3B3 700x3~ 1.00 1.00 1.00 1.00 0.35 1.00 1.00
93 3B4 650x3~ 1.00 1.00 1.00 1.00 0.35 1.00 1.00
94 3B5 600x3~ 1.00 1.00 1.00 1.00 0.35 1.00 1.00
95 3B6 500x3~ 1.00 1.00 1.00 1.00 0.35 1.00 1.00
96 3B7 500x3~ 1.00 1.00 1.00 1.00 0.35 1.00 1.00
97 3B8 400x3~ 1.00 1.00 1.00 1.00 0.35 1.00 1.00
98 *********~
99 3CB1 600x~ 1.00 1.00 1.00 1.00 0.35 1.00 1.00
100 3CB2 500x~ 1.00 1.00 1.00 1.00 0.35 1.00 1.00
128 3B9 750x3~
147 *********~ 1.00 1.00 1.00 1.00 0.35 1.00 1.00
150 RB1 750x4~ 1.00 1.00 1.00 1.00 0.35 1.00 1.00
151 RB2 700x4~ 1.00 1.00 1.00 1.00 0.35 1.00 1.00
152 RB3 600x4~ 1.00 1.00 1.00 1.00 0.35 1.00 1.00
153 RB4 500x3~ 1.00 1.00 1.00 1.00 0.35 1.00 1.00
154 RB5 500x3~ 1.00 1.00 1.00 1.00 0.35 1.00 1.00
160 CRB1 550x~ 1.00 1.00 1.00 1.00 0.35 1.00 1.00
161 CRB2 500x~ 1.00 1.00 1.00 1.00 0.35 1.00 1.00
184 ********** 1.00 1.00 1.00 1.00 0.35 1.00 1.00
200 2L2X2X1/4
201 2L1.5X1.5~
202 2L2X2X1/4
203 2L1.5X1.5~
204 2L2X2X3/16
205 dummy
206 TP B1
207 LT-2
Modeling, Integrated Design & Analysis Software Print Date/Time : 11/30/2021 11:17
http://www.MidasUser.com
Gen 2019 - 3 / 24 -
midas Gen MODEL DATA PROFILE
Modeling, Integrated Design & Analysis Software Print Date/Time : 11/30/2021 11:17
http://www.MidasUser.com
Gen 2019 - 4 / 24 -
midas Gen MODEL DATA PROFILE
; Self Weight, Nodal Load, Specified Displacement, Beam Load, Floor Load, Finishing Material Load,
System Temperature, Nodal Temperature, Element Temperature, Beam Section Temperature,
Wind Load, Static Seismic Load, Time History Analysis Data
Modeling, Integrated Design & Analysis Software Print Date/Time : 11/30/2021 11:17
http://www.MidasUser.com
Gen 2019 - 5 / 24 -
midas Gen MODEL DATA PROFILE
Modeling, Integrated Design & Analysis Software Print Date/Time : 11/30/2021 11:17
http://www.MidasUser.com
Gen 2019 - 6 / 24 -
midas Gen MODEL DATA PROFILE
Modeling, Integrated Design & Analysis Software Print Date/Time : 11/30/2021 11:17
http://www.MidasUser.com
Gen 2019 - 7 / 24 -
midas Gen MODEL DATA PROFILE
Modeling, Integrated Design & Analysis Software Print Date/Time : 11/30/2021 11:17
http://www.MidasUser.com
Gen 2019 - 8 / 24 -
midas Gen MODEL DATA PROFILE
[ LOAD CASE : LL ]
------------------------------------------------------------------------------------------------------
Note. The following masses are between two adjacent stories or on the
nodes released from floor rigid diaphragm by *Diaphragm Disconnect command.
The masses are proportionally distributed to upper/lower stories according
to their vertical locations. For dynamic analysis, however, floor masses
and masses on vertical elements remain at their original locations.
Modeling, Integrated Design & Analysis Software Print Date/Time : 11/30/2021 11:17
http://www.MidasUser.com
Gen 2019 - 9 / 24 -
midas Gen MODEL DATA PROFILE
* EQUIVALENT SEISMIC LOAD IN ACCORDANCE WITH UNIFORM BUILDING CODE 1997 [UNIT: kN, m]
_____________________________________________________________________________________________
===========================
ECCENTRICITY RELATED DATA
===========================
X - D I R E C T I O N A L L O A D Y - D I R E C T I O N A L L O A D
-------------------------------------------------------------------------------------------------------
The accidental amplification factors are automatically set to 1.0 when torsional amplification effect
to accidental eccentricity is not considered.
The inherent amplification factors are automatically set to 0 when torsional amplification effect
to inherent eccentricity is not considered.
The inherent amplification factors are all set to 'the input value - 1.0'.(This is to exclude the true
inherent torsion)
-------------------------------------------------------------------------------------------------------
Modeling, Integrated Design & Analysis Software Print Date/Time : 11/30/2021 11:17
http://www.MidasUser.com
Gen 2019 - 10 / 24 -
midas Gen MODEL DATA PROFILE
S E I S M I C L O A D G E N E R A T I O N D A T A X - D I R E C T I O N
STORY STORY STORY SEISMIC ADDED STORY STORY OVERTURN. ACCIDENT. INHERENT TOTAL
NAME WEIGHT LEVEL FORCE FORCE FORCE SHEAR MOMENT TORSION TORSION TORSION
---------- -------- ------- -------- -------- -------- -------- --------- --------- --------- ---------
RB_1 3157.551 12.0 702.7757 0.0 702.7757 0.0 0.0 0.0 0.0 0.0
3F_2 5659.299 9.0 944.6921 0.0 944.6921 702.7757 2108.327 679.3493 0.0 679.3493
3F_1 5074.005 8.5 799.9354 0.0 799.9354 1647.468 2932.061 575.2515 0.0 575.2515
2F 14141.25 4.5 1180.281 0.0 1180.281 2447.403 12721.67 686.4779 0.0 686.4779
G.L. -- 0.0 -- -- -- 3627.684 29046.25 --- --- ---
-------------------------------------------------------------------------------------------------------
S E I S M I C L O A D G E N E R A T I O N D A T A Y - D I R E C T I O N
STORY STORY STORY SEISMIC ADDED STORY STORY OVERTURN. ACCIDENT. INHERENT TOTAL
NAME WEIGHT LEVEL FORCE FORCE FORCE SHEAR MOMENT TORSION TORSION TORSION
---------- -------- ------- -------- -------- -------- -------- --------- --------- --------- ---------
RB_1 3157.551 12.0 702.7757 0.0 0.0 0.0 0.0 0.0 0.0 0.0
3F_2 5659.299 9.0 944.6921 0.0 0.0 0.0 0.0 0.0 0.0 0.0
3F_1 5074.005 8.5 799.9354 0.0 0.0 0.0 0.0 0.0 0.0 0.0
2F 14141.25 4.5 1180.281 0.0 0.0 0.0 0.0 0.0 0.0 0.0
G.L. -- 0.0 -- -- -- 0.0 0.0 --- --- ---
-------------------------------------------------------------------------------------------------------
=================================================
COMMENTS ABOUT TORSION
=================================================
-------------------------------------------------------------------------------------------------------
If torsional amplification effects are considered :
-------------------------------------------------------------------------------------------------------
Accidental Torsion , Story Force * Accidental Eccentricity * Amp. Factor for Accidental Eccentricity
Inherent Torsion , Story Force * Inherent Eccentricity * Amp. Factor for Inherent Eccentricity
-------------------------------------------------------------------------------------------------------
If torsional amplification effects are not considered :
-------------------------------------------------------------------------------------------------------
Accidental Torsion , Story Force * Accidental Eccentricity
Inherent Torsion , 0
-------------------------------------------------------------------------------------------------------
The inherent torsion above is the additional torsion due to torsional amplification effect.
The true inherent torsion is considered automatically in analysis stage when the seismic force is
applied to the structure.
-------------------------------------------------------------------------------------------------------
------------------------------------------------------------------------------------------------------
Modeling, Integrated Design & Analysis Software Print Date/Time : 11/30/2021 11:17
http://www.MidasUser.com
Gen 2019 - 11 / 24 -
midas Gen MODEL DATA PROFILE
Note. The following masses are between two adjacent stories or on the
nodes released from floor rigid diaphragm by *Diaphragm Disconnect command.
The masses are proportionally distributed to upper/lower stories according
to their vertical locations. For dynamic analysis, however, floor masses
and masses on vertical elements remain at their original locations.
* EQUIVALENT SEISMIC LOAD IN ACCORDANCE WITH UNIFORM BUILDING CODE 1997 [UNIT: kN, m]
_____________________________________________________________________________________________
===========================
ECCENTRICITY RELATED DATA
===========================
X - D I R E C T I O N A L L O A D Y - D I R E C T I O N A L L O A D
-------------------------------------------------------------------------------------------------------
The accidental amplification factors are automatically set to 1.0 when torsional amplification effect
Modeling, Integrated Design & Analysis Software Print Date/Time : 11/30/2021 11:17
http://www.MidasUser.com
Gen 2019 - 12 / 24 -
midas Gen MODEL DATA PROFILE
S E I S M I C L O A D G E N E R A T I O N D A T A X - D I R E C T I O N
STORY STORY STORY SEISMIC ADDED STORY STORY OVERTURN. ACCIDENT. INHERENT TOTAL
NAME WEIGHT LEVEL FORCE FORCE FORCE SHEAR MOMENT TORSION TORSION TORSION
---------- -------- ------- -------- -------- -------- -------- --------- --------- --------- ---------
RB_1 3157.551 12.0 702.7757 0.0 0.0 0.0 0.0 0.0 0.0 0.0
3F_2 5659.299 9.0 944.6921 0.0 0.0 0.0 0.0 0.0 0.0 0.0
3F_1 5074.005 8.5 799.9354 0.0 0.0 0.0 0.0 0.0 0.0 0.0
2F 14141.25 4.5 1180.281 0.0 0.0 0.0 0.0 0.0 0.0 0.0
G.L. -- 0.0 -- -- -- 0.0 0.0 --- --- ---
-------------------------------------------------------------------------------------------------------
S E I S M I C L O A D G E N E R A T I O N D A T A Y - D I R E C T I O N
STORY STORY STORY SEISMIC ADDED STORY STORY OVERTURN. ACCIDENT. INHERENT TOTAL
NAME WEIGHT LEVEL FORCE FORCE FORCE SHEAR MOMENT TORSION TORSION TORSION
---------- -------- ------- -------- -------- -------- -------- --------- --------- --------- ---------
RB_1 3157.551 12.0 702.7757 0.0 702.7757 0.0 0.0 0.0 0.0 0.0
3F_2 5659.299 9.0 944.6921 0.0 944.6921 702.7757 2108.327 1313.122 0.0 1313.122
3F_1 5074.005 8.5 799.9354 0.0 799.9354 1647.468 2932.061 1111.91 0.0 1111.91
2F 14141.25 4.5 1180.281 0.0 1180.281 2447.403 12721.67 1640.59 0.0 1640.59
G.L. -- 0.0 -- -- -- 3627.684 29046.25 --- --- ---
-------------------------------------------------------------------------------------------------------
=================================================
COMMENTS ABOUT TORSION
=================================================
-------------------------------------------------------------------------------------------------------
If torsional amplification effects are considered :
-------------------------------------------------------------------------------------------------------
Accidental Torsion , Story Force * Accidental Eccentricity * Amp. Factor for Accidental Eccentricity
Inherent Torsion , Story Force * Inherent Eccentricity * Amp. Factor for Inherent Eccentricity
-------------------------------------------------------------------------------------------------------
If torsional amplification effects are not considered :
-------------------------------------------------------------------------------------------------------
Accidental Torsion , Story Force * Accidental Eccentricity
Inherent Torsion , 0
-------------------------------------------------------------------------------------------------------
The inherent torsion above is the additional torsion due to torsional amplification effect.
The true inherent torsion is considered automatically in analysis stage when the seismic force is
applied to the structure.
-------------------------------------------------------------------------------------------------------
------------------------------------------------------------------------------------------------------
Modeling, Integrated Design & Analysis Software Print Date/Time : 11/30/2021 11:17
http://www.MidasUser.com
Gen 2019 - 13 / 24 -
midas Gen MODEL DATA PROFILE
Note. The following masses are between two adjacent stories or on the
nodes released from floor rigid diaphragm by *Diaphragm Disconnect command.
The masses are proportionally distributed to upper/lower stories according
to their vertical locations. For dynamic analysis, however, floor masses
and masses on vertical elements remain at their original locations.
* EQUIVALENT SEISMIC LOAD IN ACCORDANCE WITH UNIFORM BUILDING CODE 1997 [UNIT: kN, m]
_____________________________________________________________________________________________
===========================
ECCENTRICITY RELATED DATA
===========================
X - D I R E C T I O N A L L O A D Y - D I R E C T I O N A L L O A D
Modeling, Integrated Design & Analysis Software Print Date/Time : 11/30/2021 11:17
http://www.MidasUser.com
Gen 2019 - 14 / 24 -
midas Gen MODEL DATA PROFILE
-------------------------------------------------------------------------------------------------------
The accidental amplification factors are automatically set to 1.0 when torsional amplification effect
to accidental eccentricity is not considered.
The inherent amplification factors are automatically set to 0 when torsional amplification effect
to inherent eccentricity is not considered.
The inherent amplification factors are all set to 'the input value - 1.0'.(This is to exclude the true
inherent torsion)
-------------------------------------------------------------------------------------------------------
S E I S M I C L O A D G E N E R A T I O N D A T A X - D I R E C T I O N
STORY STORY STORY SEISMIC ADDED STORY STORY OVERTURN. ACCIDENT. INHERENT TOTAL
NAME WEIGHT LEVEL FORCE FORCE FORCE SHEAR MOMENT TORSION TORSION TORSION
---------- -------- ------- -------- -------- -------- -------- --------- --------- --------- ---------
RB_1 3157.551 12.0 702.7757 0.0 702.7757 0.0 0.0 0.0 0.0 0.0
3F_2 5659.299 9.0 944.6921 0.0 944.6921 702.7757 2108.327 -679.3493 0.0 -679.3493
3F_1 5074.005 8.5 799.9354 0.0 799.9354 1647.468 2932.061 -575.2515 0.0 -575.2515
2F 14141.25 4.5 1180.281 0.0 1180.281 2447.403 12721.67 -686.4779 0.0 -686.4779
G.L. -- 0.0 -- -- -- 3627.684 29046.25 --- --- ---
-------------------------------------------------------------------------------------------------------
S E I S M I C L O A D G E N E R A T I O N D A T A Y - D I R E C T I O N
STORY STORY STORY SEISMIC ADDED STORY STORY OVERTURN. ACCIDENT. INHERENT TOTAL
NAME WEIGHT LEVEL FORCE FORCE FORCE SHEAR MOMENT TORSION TORSION TORSION
---------- -------- ------- -------- -------- -------- -------- --------- --------- --------- ---------
RB_1 3157.551 12.0 702.7757 0.0 0.0 0.0 0.0 0.0 0.0 0.0
3F_2 5659.299 9.0 944.6921 0.0 0.0 0.0 0.0 0.0 0.0 0.0
3F_1 5074.005 8.5 799.9354 0.0 0.0 0.0 0.0 0.0 0.0 0.0
2F 14141.25 4.5 1180.281 0.0 0.0 0.0 0.0 0.0 0.0 0.0
G.L. -- 0.0 -- -- -- 0.0 0.0 --- --- ---
-------------------------------------------------------------------------------------------------------
=================================================
COMMENTS ABOUT TORSION
=================================================
-------------------------------------------------------------------------------------------------------
If torsional amplification effects are considered :
-------------------------------------------------------------------------------------------------------
Accidental Torsion , Story Force * Accidental Eccentricity * Amp. Factor for Accidental Eccentricity
Inherent Torsion , Story Force * Inherent Eccentricity * Amp. Factor for Inherent Eccentricity
-------------------------------------------------------------------------------------------------------
If torsional amplification effects are not considered :
-------------------------------------------------------------------------------------------------------
Accidental Torsion , Story Force * Accidental Eccentricity
Inherent Torsion , 0
-------------------------------------------------------------------------------------------------------
The inherent torsion above is the additional torsion due to torsional amplification effect.
The true inherent torsion is considered automatically in analysis stage when the seismic force is
applied to the structure.
-------------------------------------------------------------------------------------------------------
------------------------------------------------------------------------------------------------------
Modeling, Integrated Design & Analysis Software Print Date/Time : 11/30/2021 11:17
http://www.MidasUser.com
Gen 2019 - 15 / 24 -
midas Gen MODEL DATA PROFILE
Note. The following masses are between two adjacent stories or on the
nodes released from floor rigid diaphragm by *Diaphragm Disconnect command.
The masses are proportionally distributed to upper/lower stories according
to their vertical locations. For dynamic analysis, however, floor masses
and masses on vertical elements remain at their original locations.
* EQUIVALENT SEISMIC LOAD IN ACCORDANCE WITH UNIFORM BUILDING CODE 1997 [UNIT: kN, m]
_____________________________________________________________________________________________
===========================
ECCENTRICITY RELATED DATA
===========================
X - D I R E C T I O N A L L O A D Y - D I R E C T I O N A L L O A D
Modeling, Integrated Design & Analysis Software Print Date/Time : 11/30/2021 11:17
http://www.MidasUser.com
Gen 2019 - 16 / 24 -
midas Gen MODEL DATA PROFILE
-------------------------------------------------------------------------------------------------------
The accidental amplification factors are automatically set to 1.0 when torsional amplification effect
to accidental eccentricity is not considered.
The inherent amplification factors are automatically set to 0 when torsional amplification effect
to inherent eccentricity is not considered.
The inherent amplification factors are all set to 'the input value - 1.0'.(This is to exclude the true
inherent torsion)
-------------------------------------------------------------------------------------------------------
S E I S M I C L O A D G E N E R A T I O N D A T A X - D I R E C T I O N
STORY STORY STORY SEISMIC ADDED STORY STORY OVERTURN. ACCIDENT. INHERENT TOTAL
NAME WEIGHT LEVEL FORCE FORCE FORCE SHEAR MOMENT TORSION TORSION TORSION
---------- -------- ------- -------- -------- -------- -------- --------- --------- --------- ---------
RB_1 3157.551 12.0 702.7757 0.0 0.0 0.0 0.0 0.0 0.0 0.0
3F_2 5659.299 9.0 944.6921 0.0 0.0 0.0 0.0 0.0 0.0 0.0
3F_1 5074.005 8.5 799.9354 0.0 0.0 0.0 0.0 0.0 0.0 0.0
2F 14141.25 4.5 1180.281 0.0 0.0 0.0 0.0 0.0 0.0 0.0
G.L. -- 0.0 -- -- -- 0.0 0.0 --- --- ---
-------------------------------------------------------------------------------------------------------
S E I S M I C L O A D G E N E R A T I O N D A T A Y - D I R E C T I O N
STORY STORY STORY SEISMIC ADDED STORY STORY OVERTURN. ACCIDENT. INHERENT TOTAL
NAME WEIGHT LEVEL FORCE FORCE FORCE SHEAR MOMENT TORSION TORSION TORSION
---------- -------- ------- -------- -------- -------- -------- --------- --------- --------- ---------
RB_1 3157.551 12.0 702.7757 0.0 702.7757 0.0 0.0 0.0 0.0 0.0
3F_2 5659.299 9.0 944.6921 0.0 944.6921 702.7757 2108.327 -1313.122 0.0 -1313.122
3F_1 5074.005 8.5 799.9354 0.0 799.9354 1647.468 2932.061 -1111.91 0.0 -1111.91
2F 14141.25 4.5 1180.281 0.0 1180.281 2447.403 12721.67 -1640.59 0.0 -1640.59
G.L. -- 0.0 -- -- -- 3627.684 29046.25 --- --- ---
-------------------------------------------------------------------------------------------------------
=================================================
COMMENTS ABOUT TORSION
=================================================
-------------------------------------------------------------------------------------------------------
If torsional amplification effects are considered :
-------------------------------------------------------------------------------------------------------
Accidental Torsion , Story Force * Accidental Eccentricity * Amp. Factor for Accidental Eccentricity
Inherent Torsion , Story Force * Inherent Eccentricity * Amp. Factor for Inherent Eccentricity
-------------------------------------------------------------------------------------------------------
If torsional amplification effects are not considered :
-------------------------------------------------------------------------------------------------------
Accidental Torsion , Story Force * Accidental Eccentricity
Inherent Torsion , 0
-------------------------------------------------------------------------------------------------------
The inherent torsion above is the additional torsion due to torsional amplification effect.
The true inherent torsion is considered automatically in analysis stage when the seismic force is
applied to the structure.
-------------------------------------------------------------------------------------------------------
[ LOAD CASE : WX ]
------------------------------------------------------------------------------------------------------
Modeling, Integrated Design & Analysis Software Print Date/Time : 11/30/2021 11:17
http://www.MidasUser.com
Gen 2019 - 17 / 24 -
midas Gen MODEL DATA PROFILE
-----------------------------------------------------------------------------------------------
Wind force of the specific story is calculated as the sum of the forces
of the following two parts.
1. Part I : Lower half part of the specific story
2. Part II : Upper half part of the just below story of the specific story
The reference height for the calculation of the wind pressure related factors are,
therefore, considered separately for the above mentioned two parts as follows.
Reference height for the wind pressure related factors(except topographic related factors)
1. Part I : top level of the specific story
2. Part II : top level of the just below story of the specific story
-----------------------------------------------------------------------------------------------
Modeling, Integrated Design & Analysis Software Print Date/Time : 11/30/2021 11:17
http://www.MidasUser.com
Gen 2019 - 18 / 24 -
midas Gen MODEL DATA PROFILE
W I N D L O A D G E N E R A T I O N D A T A X - D I R E C T I O N
W I N D L O A D G E N E R A T I O N D A T A Y - D I R E C T I O N
W I N D L O A D G E N E R A T I O N D A T A RZ - D I R E C T I O N
STORY NAME TORSIONAL ELEV. LOADED LOADED WIND ADDED STORY ACCUMULATED
PRESSURE HEIGHT BREADTH TORSION TORSION TORSION TORSION
---------- --------- ------- ------- ------- ---------- ---------- ---------- -----------
RB_1 0.0 12.0 1.5 0.0 0.0 0.0 0.0 0.0
3F_2 0.0 9.0 1.75 14.3824 0.0 0.0 0.0 0.0
3F_1 0.0 8.5 2.25 14.3824 0.0 0.0 0.0 0.0
2F 0.0 4.5 4.25 11.6325 0.0 0.0 0.0 0.0
G.L. 0.0 0.0 2.25 11.6324 0.0 0.0 -- 0.0
-----------------------------------------------------------------------------------------
===========================
ECCENTRICITY RELATED DATA
===========================
[ LOAD CASE : WY ]
------------------------------------------------------------------------------------------------------
Modeling, Integrated Design & Analysis Software Print Date/Time : 11/30/2021 11:17
http://www.MidasUser.com
Gen 2019 - 19 / 24 -
midas Gen MODEL DATA PROFILE
-----------------------------------------------------------------------------------------------
Wind force of the specific story is calculated as the sum of the forces
of the following two parts.
1. Part I : Lower half part of the specific story
2. Part II : Upper half part of the just below story of the specific story
The reference height for the calculation of the wind pressure related factors are,
therefore, considered separately for the above mentioned two parts as follows.
Reference height for the wind pressure related factors(except topographic related factors)
1. Part I : top level of the specific story
2. Part II : top level of the just below story of the specific story
-----------------------------------------------------------------------------------------------
W I N D L O A D G E N E R A T I O N D A T A X - D I R E C T I O N
W I N D L O A D G E N E R A T I O N D A T A Y - D I R E C T I O N
Modeling, Integrated Design & Analysis Software Print Date/Time : 11/30/2021 11:17
http://www.MidasUser.com
Gen 2019 - 20 / 24 -
midas Gen MODEL DATA PROFILE
RB_1 1.132977 12.0 1.5 0.0 74.213223 0.0 74.213223 0.0 0.0
3F_2 1.779694 9.0 1.75 27.8 86.11935 0.0 86.11935 74.213223 222.63967
3F_1 1.713112 8.5 2.25 27.8 106.44595 0.0 106.44595 160.33257 302.80595
2F 1.700356 4.5 4.25 27.8 187.17407 0.0 187.17407 266.77852 1369.92
G.L. 1.571404 0.0 2.25 26.2 0.0 0.0 -- 453.95259 3412.7067
--------------------------------------------------------------------------------------------------
W I N D L O A D G E N E R A T I O N D A T A RZ - D I R E C T I O N
STORY NAME TORSIONAL ELEV. LOADED LOADED WIND ADDED STORY ACCUMULATED
PRESSURE HEIGHT BREADTH TORSION TORSION TORSION TORSION
---------- --------- ------- ------- ------- ---------- ---------- ---------- -----------
RB_1 0.0 12.0 1.5 0.0 0.0 0.0 0.0 0.0
3F_2 0.0 9.0 1.75 14.3824 0.0 0.0 0.0 0.0
3F_1 0.0 8.5 2.25 14.3824 0.0 0.0 0.0 0.0
2F 0.0 4.5 4.25 11.6325 0.0 0.0 0.0 0.0
G.L. 0.0 0.0 2.25 11.6324 0.0 0.0 -- 0.0
-----------------------------------------------------------------------------------------
===========================
ECCENTRICITY RELATED DATA
===========================
NAME
FUNCTION DIR. ANGLE SCALE PERIOD ACCIDENTAL
NAME FACTOR ECCENTRICITY
--------------- --------------- ------ -------- -------- -------- ---------------
RSX UBC1997 X-Y 0 0.1176 1 -
RSY UBC1997 X-Y 90 0.1176 1 -
** STEEL DESIGN
NO NAME TYPE ACTIVE DESCRIPTION
-------- ---------- ---------- ---------- ---------------------------------------------
1 sLCB1 Add ACTIVE 1.4D
2 sLCB2 Add ACTIVE 1.2D + 1.0WX
3 sLCB3 Add ACTIVE 1.2D + 1.0WY
4 sLCB4 Add ACTIVE 1.2D - 1.0WX
5 sLCB5 Add ACTIVE 1.2D - 1.0WY
6 sLCB6 Add ACTIVE 1.2D + 1.0EQX +ECC
7 sLCB7 Add ACTIVE 1.2D + 1.0EQY +ECC
8 sLCB8 Add ACTIVE 1.2D + 1.0EQX -ECC
9 sLCB9 Add ACTIVE 1.2D + 1.0EQY -ECC
10 sLCB10 Add ACTIVE 1.2D - 1.0EQX +ECC
11 sLCB11 Add ACTIVE 1.2D - 1.0EQY +ECC
12 sLCB12 Add ACTIVE 1.2D - 1.0EQX -ECC
13 sLCB13 Add ACTIVE 1.2D - 1.0EQY -ECC
14 sLCB14 Add ACTIVE 1.2D + 1.0(1.0)RSX
15 sLCB15 Add ACTIVE 1.2D + 1.0(1.0)RSY
16 sLCB16 Add ACTIVE 1.2D - 1.0(1.0)RSX
17 sLCB17 Add ACTIVE 1.2D - 1.0(1.0)RSY
18 sLCB18 Add ACTIVE 0.9D + 1.0WX
19 sLCB19 Add ACTIVE 0.9D + 1.0WY
20 sLCB20 Add ACTIVE 0.9D - 1.0WX
21 sLCB21 Add ACTIVE 0.9D - 1.0WY
22 sLCB22 Add ACTIVE 0.9D + 1.0EQX +ECC
Modeling, Integrated Design & Analysis Software Print Date/Time : 11/30/2021 11:17
http://www.MidasUser.com
Gen 2019 - 21 / 24 -
midas Gen MODEL DATA PROFILE
Modeling, Integrated Design & Analysis Software Print Date/Time : 11/30/2021 11:17
http://www.MidasUser.com
Gen 2019 - 22 / 24 -
midas Gen MODEL DATA PROFILE
Modeling, Integrated Design & Analysis Software Print Date/Time : 11/30/2021 11:17
http://www.MidasUser.com
Gen 2019 - 23 / 24 -
midas Gen MODEL DATA PROFILE
Modeling, Integrated Design & Analysis Software Print Date/Time : 11/30/2021 11:17
http://www.MidasUser.com
Gen 2019 - 24 / 24 -