JSA: JOB SAFETY ANALYSIS WORKSHEET REVISION: 0

JOB: Drawworks Repair TEAM LEADER: Al makhzoom Said DATE: 24.12.09

WEAR FULL PPE: SAFETY HELMET - SAFETY BOOTS – SAFETY GLASSES- GLOVES- LONG-SLEEVED COVERALLS –
HEARING PROTECTION IF NECESSARY

Steps Description of Job Step
1 Prepare equipment – ladders,
harnesses, PPE, tools, work permit
and isolations.
Check worksites
Hold TBT
2 Prepare equipment to be
maintained/repaired
3 Carry out maintenance/repairs
Potential Accident or Hazards Safe Condition or Activity required
Failure of equipment Check all equipment is fit for purpose.
Unsafe worksite Inspect worksite for conflict, hazards, etc. and ensure it is safe
for work to commence.
Work plan inadequate Brief personnel and ensure all know to stop if conditions change
Snakes/insects Personnel to be reminded to wear gloves and check all areas.
Electrical shock/equipment powered up Prior to any intrusive maintenance operations the Rig electrician
will isolate all relevant powered equipment.
Unsafe access Suitable equipment to be used to provide safe access to all areas
Manual handling Ensure mechanical aids are used where possible. Team lifts to
be carried out if necessary. Personnel made aware of hazard.
Miscellaneous injuries PPE and gloves to be worn
Unsafe access Suitable equipment to be used to provide safe access to all areas
Manual handling Ensure mechanical aids are used where possible. Team lifts to
be carried out if necessary. Personnel made aware of hazard.
Miscellaneous injuries PPE and gloves to be worn

4 Return all tools and equipment Manual handling Ensure mechanical aids are used where possible. Team lifts to
Check worksites are safe and tidy be carried out if necessary. Personnel made aware of hazard.
Remove isolations and close permit Miscellaneous injuries PPE and gloves to be worn

REMEMBER: Discuss with Work Group Attach Copy to Work Permit File Original Copy to Safety Dept