Professional Documents
Culture Documents
Wide Beam Ultrasonic Sensor: Warning
Wide Beam Ultrasonic Sensor: Warning
com
Wide Beam Ultrasonic Sensor
5
1ppp HPL0
HPL0 54P3 IP69K YY-WXX
54P3 IP69K YY-WXX
XXW
XXW
..24
VDC PP-YY VDC
12...24
PP-YY
12. Ue:
Ue:
A A
in US tus in US t Sta
tus
Made t Sta Made
Outpu Outpu
tus tus
o Sta o Sta
Ech Ech
Dimensions LEDs
0.47
12
XXW54P3HPL01DM6
Ue: 12...24VDC IP69K
31,5
PP-YYYY-WXX
0.08
Ø 4,32
Ø 0.17
Made in USA
2
The White LED is ON when the green is OFF (to indicate that
Ø 0.24
Ø6
Ø 54
Ø 2.13 200 Yellow = object detected between the near and the far limits
7.87 (from 0,425m to 3m / 1.39 to 9.8 ft.).
24,3 XXW54P3HPL01M12
0.96
XXW54P3HPL05
500
19.7
(Not provided)
M4
A
in US tus
Made t Sta
Outpu
Status
XXW54P3HPL01DM6
Ech
Note :
(1): See synchronization section
Pin Wire Color Description (2): Deutsch connector Pin 5 = Sealing plug.
4 3 Connector model: Number Silicone Stainless
5 M12 - male 5-pin
1 BN: Brown +12...24 Vdc
washer steel
insert A
1 2 A y 3 Nm (26.6 lb-in)
2 BU: Blue 0 Vdc
XXW54P3HPL01M12
3 BK: Black 0,5...4,5V Analog Output (3) (3): The analogue output is 5 volts in case of CAUTION
WH: White PNP Digital Output excessive environmental noise. This exceeded
4 RISK OF MATERIAL DAMAGE
output value means that the sensor cannot work
The stainless steel insert and the silicone washer are mandatory
GY: Grey Synchronization (1) properly in this environment. in all mounting cases
5
Failure to follow these instructions can result in injury or
Cable model: 5 wires - 0,34 mm² / 22 AWG equipment damage.
XXW54P3HPL05
GDE78658_07 1/2
02 - 2022
XXW54P3HPL0ppp
Mutual influence between 2 side by side separate mobile equipments
(Sensors in the same mobile equipment must be synchronized
but between 2 mobile equipments, the sensors can not be synchronized.)
Note : For the side by side use, consider the machine manufacturer's prescriptions
without ever going below the 2,5 m / 8.2 ft. .
400
Sensor setting
The settings can be changed with the Ultrasonic Sensors configuration Interface and the dedicated software
See : XXZBOX01 / XXZKIT01 Ultrasonic sensors configuration interface, Instruction sheet
https://tesensors.com/global/en/document/QGH70768_EN
Start
XXZBOX01
3 m / 9.8 ft.)
/ DC
AC PWR ERR
Sensing window
Inverse slope
4,5V
Out1
Analog XXZKITDM6
0,5V
Direct slope XXW54ppDM6
YE
Manufacturer :
Schneider Electric Industries SAS
35 rue Joseph Monier
92500 Rueil Malmaison Scan the Qr-code
France to access this
Note : Instruction Sheet
UK Representative :
You can download this Instruction Sheet in different in different
Schneider Electric Limited languages from our website at: www.tesensors.com languages.
Stafford Park 5 We welcome your comments about this document. You can
reach us through the customer support page on your local
Telford, TF3 3BL website.
United Kingdom http://qr.tesensors.com/XX0003
Electrical equipment should be installed, operated, serviced, and maintained only by qualified personnel.
No responsibility is assumed by Schneider Electric for any consequences arising out of the use of this material.
© 2022 Schneider Electric. “All Rights Reserved.”
GDE78658_07 2/2
02 - 2022