Professional Documents
Culture Documents
Simulation of Part1: No Data
Simulation of Part1: No Data
Simulation of Part1
Date: Thursday, 30 December 2021
Designer: Muneer Ahmed
Study name: 2019412
Analysis type: Static
Table of Contents
Description ........................................... 1
Assumptions .......................................... 2
Model Information .................................. 2
Study Properties ..................................... 3
Units ................................................... 3
Material Properties ................................. 4
Description Loads and Fixtures .................................. 4
No Data Mesh information .................................... 5
Resultant Forces ..................................... 6
Beams ................................................. 6
Study Results ......................................... 7
Assumptions
Model Information
Study Properties
Study name 2019412
Analysis type Static
Mesh type Beam Mesh
Solver type FFEPlus
Inplane Effect: Off
Soft Spring: Off
Inertial Relief: Off
Incompatible bonding options Automatic
Large displacement Off
Compute free body forces On
Result folder SOLIDWORKS document
(c:\users\affana~1\appdata\local\temp)
Units
Unit system: SI (MKS)
Length/Displacement mm
Temperature Kelvin
Angular velocity Rad/sec
Pressure/Stress N/m^2
Material Properties
Model Reference Properties Components
Name: 6061-T6 (SS) SolidBody 1(Boss-
Model type: Linear Elastic Isotropic Extrude1)(Part1)
Default failure Max Shear Stress
criterion: (Tresca)
Yield strength: 2.75e+08 N/m^2
Tensile strength: 3.1e+08 N/m^2
Elastic modulus: 6.9e+10 N/m^2
Poisson's ratio: 0.33
Mass density: 2,700 kg/m^3
Shear modulus: 2.6e+10 N/m^2
Thermal expansion 2.4e-05 /Kelvin
coefficient:
Curve Data:N/A
Mesh information
Mesh type Beam Mesh
Resultant Forces
Reaction forces
Selection set Units Sum X Sum Y Sum Z Resultant
Entire Model N 0 1,541.4 1.58603e-13 1,541.4
Reaction Moments
Selection set Units Sum X Sum Y Sum Z Resultant
Entire Model N.m 0 -3.17207e-13 3,062.1 3,062.1
Beams
Beam Forces
Beam Joint Axial(N Shear1(N Shear2(N Moment1(N.m Moment2(N.m Torque(N.m
Name s ) ) ) ) ) )
Beam- 3.66178e- -1.4585e-
1 0 8.10598e-07 1.30352e-24 0
1(Boss- 24 06
Extrude1 -4.3772e-
2 0 1,541.4 3,062.1 6.56571e-15 0
) 15
Beam Stresses
Upper bound axial
Beam Bending Bending Torsional
Joints Axial(N/m^2) and
Name Dir1(N/m^2) Dir2(N/m^2) (N/m^2)
bending(N/m^2)
Beam- 1 0 -0.0361083 5.80658e-20 0 0.0361083
1(Boss-
2 0 1.36402e+08 -2.92472e-10 0 1.36402e+08
Extrude1)
Study Results
Part1-2019412-Stress-Stress1
Part1-2019412-Displacement-Displacement1
Name Type
Shear-Moment Plot1 Shear Force in Dir2
Name Type
Shear-Moment Plot2 Moment about Dir1