Professional Documents
Culture Documents
AAC Testing Standards PL137900e 2000-2013 (METRIC)
AAC Testing Standards PL137900e 2000-2013 (METRIC)
Mühlmahdweg 25 a
86167 Augsburg
Test methods provided in section 5 and table 1 the laboratory is permitted without
being required to inform and obtain prior approval from the DAP Deutsches Akkre-
ditierungssystem Prüfwesen GmbH (Accredit & Approval), in the following:
1.1 Tests on concrete, mortar, screeds and their base materials and products made
from them
ISO 2736-2 Concrete tests - Test specimens; Making and curing of test
1986-10 specimens for strength tests
DIN EN 480-2 Admixtures for concrete, mortar and grout; Test methods;
2006-11 Determination of setting time
DIN EN 480-8 Admixtures for concrete, mortar and grout; Test methods;
1997-02 Determination of the conventional dry material content
DIN EN 1015-1 Methods of test for mortar for masonry - Part 1: Determination
2007-05 of particle size distribution (by sieve analysis)
DIN EN 1015-2 Methods of test for mortar for masonry - Part 2: Bulk sampling
2007-05 of mortars and preparation of test mortars
DIN EN 1015-3 Methods of test for mortar for masonry - Part 3: Determination
2007-05 of consistence of fresh mortar (by flow table)
DIN EN 1015-6 Methods of test for mortar for masonry - Part 6: Determination
2007-05 of bulk density of fresh mortar
DIN EN 1015-7 Methods of test for mortar for masonry - Part 7: Determination
1998-12 of air content of fresh mortar
DIN EN 1015-9 Methods of test for mortar for masonry - Part 9: Determination
2007-05 of workable life and correction time of fresh mortar
DIN EN 1015-10 Methods of test for mortar for masonry - Part 10: Determina-
2007-05 tion of bulk density of hardened mortar
DIN EN 1015-12 Methods of test for mortar for masonry - Part 12: Determina-
2000-06 tion of adhesive strength of hardened rendering and plaste-
ring mortars on substrates
DIN EN 1015-17 Methods of test for mortar for masonry - Part 17: Determina-
2005-01 tion of water-soluble chloride content of fresh mortars
DIN EN 1015-18 Methods of test for mortar for masonry - Part 18: Determina-
2003-03 tion of water absorption coefficient due to capillary action of
hardened mortar
DIN EN 1015-19 Methods of test for mortar for masonry - Part 19: Determina-
2005-01 tion of water vapour permeability of hardened rendering and
plastering mortars
DIN EN 1015-21 Methods of test for mortar for masonry - Part 21: Determina-
2003-03 tion of the compatibility of one-coat rendering mortars with
substrates
DIN EN 1766 Products and systems for the protection and repair of
2000-03 concrete structures - Testmethods
DIN EN 1916 Concrete pipes and fittings, unreinforced, steel fibre and
2003-04 reinforced
DIN EN 12390-2 Testing hardened concrete; Making and curing specimens for
2001-06 strength tests
DIN 488-5 Reinforcing steels; Welded fabrics and steel wire; Testing
1986-06 (withdrawn standard, replaced by DIN EN ISO 15630-1)
DIN 4158 Mid slabs and mid-beams of concrete for slabs of reinforced
1978-05 and pre-stressed concrete
DIN 4226-1 Aggregates for concrete and mortar; Normal and heavy-
2001-07 weight aggregates
DIN 11622-22 Silage and liquid manure containers; Concrete blocks acting
2004-06 as lost form work
ASTM C 143/C 143M Standard Test Method for Slump of Hydraulic Cement
2000-10 Concrete
ASTM C 494/C 494Ma Standard Specification for Chemical Admixtures for Concrete
1999-12
Bund Güteschutz Beton und Guidelines for kerbs of concrete - section 5: Testing
Stahlbeton Fertigteile e.V.
1985-05
Bund Güteschutz Beton und Guidelines for the fabrication and quality control of
Stahlbeton Fertigteile e.V. non-standardized concrete products - section 4: Testing
1998-10
Bund Güteschutz Beton und Guidelines for pavement blocks of concrete at filling stations -
Stahlbetonfertigteile e.V. section 3: Testing
1996-06
Bundesverband Deutsche Guidelines for the fabrication and quality control of water-
Beton- und Fertigteil- permeable pavement blocks of porous concrete
industrie e.V.
1995-10
DAfStb-Guideline Tests
Protection and repair of Part 3
concrete structures annex F - Determination of the moisture content by using
2001 of a CM-apparatus
para 3.2.5 - Depth of roughness
annex C - Determination of the adhesive tensile strength
Page 18 Shrinkage
1.2 Tests in the area of ceramic raw materials and building materials
DIN EN 538 Clay roofing tiles for discontinuous laying; Flexural strength
1994-11 test
ÖNORM EN 538 Clay roofing tiles for discontinuous laying; Flexural strength
1994-11 test
DIN EN 772-10 Methods of test for masonry units - Part 10: Determination of
1999-04 moisture content of calcium silicate and autoclaved aerated
concrete units
DIN EN 772-11 Methods of test for masonry units - Part 11: Determination of
2004-06 water absorption of aggregate concrete, autoclaved aerated
concrete, manufactured stone and natural stone masonry
units due to capillary action and the initial rate of water
absorption of clay masonry units
DIN EN 772-13 Methods of test for masonry units - Part 13: Determination of
2000-09 net and gross dry density of masonry units (except for natural
stone)
DIN EN 772-16 Methods of test for masonry units - Part 16: Determination of
2005-05 dimensions
DIN EN 772-18 Methods of test for masonry units - Part 18: Determination of
2000-09 freeze-thaw resistance of calcium silicate masonry units
DIN EN 772-20 Methods of test for masonry units - Part 20: Determination of
2005-05 flatness of faces of masonry units
DIN EN 1304 Clay roofing tiles for discontinuous laying; Product definitions
2005-07 and specifications
ÖNORM EN 1304 Clay roofing tiles for discontinuous laying; Product definitions
2005-07 and specifications
ÖNORM EN 1304/A Clay roofing tiles for discontinuous laying; Product definitions
2001-02 and specifications (Amendment)
DIN 105-1 Clay bricks; Solid bricks and vertically perforated bricks
1989-08 (withdrawn standard, replaced by DIN V 105-100)
DIN V 105-100 Clay masonry units - Part 100: Clay masonry units with
2005-10 specific properties
DIN 278 Hollow clay tiles (Hourdis) and hollow bricks statically loaded
1978-09
DIN 52252-1 Test methods for the determination of the frost resistance of
1986-12 fair faced clay-bricks and clinker bricks; All over freezing of
single-bricks
ÖNORM B 3200 Solid and vertical perforated clay masonry units for load-
1999-06 bearing walls; Requirements and tests, marking of conformity
ÖNORM B 3201 Vertical and horizontal perforated bricks for non-load bearing
1996-10 wall systems; Requirements, testing and marking of confor-
mity
1.3 Tests in the area of bituminous and mineral building materials and material
mixtures
DIN 1996-1 Testing of bituminous materials for road building and related
1974-12 purposes; Generality, subject index and statements for the
evaluation of tests
DIN 1996-2 Testing of bituminous materials for road building and related
1971-10 purposes; Sampling
DIN 1996-5 Testing of bituminous materials for road building and related
1983-04 purposes; Determination of water content
DIN 1996-8 Testing of bituminous materials for road building and related
1977-09 purposes; Determination of water absorption
DIN 1996-9 Testing of bituminous materials for road building and related
1981-05 purposes; Swell test
DIN 1996-10 Testing of bituminous materials for road building and related
1977-12 purposes; Static water immersion test for coated materials
DIN 1996-11 Testing of bituminous materials for road building and related
1981-07 purposes; Determination of Marshall-stability and Marshall
flow
DIN 52096 Testing of fillers for road construction; Testing the stiffening
1987-04 effect on bitumen
DIN EN 12697-1 Bituminous mixtures - Test methods for hot mix asphalt -
2006-02 Part 1: Soluble binder content
DIN EN 12697-2 Bituminous mixtures - Test method for hot mix asphalt -
2002 Part 2: Determination of particle size distribution
+ A1
2007-11
DIN EN 12697-3 Bituminous mixtures - Test methods for hot mix asphalt -
2005-04 Part 3: Bitumen recovery: Rotary evaporator
DIN EN 12697-5 Bituminous mixtures - Test methods for hot mix asphalt -
2002 Part 5: Determination of the maximum density
+ A1
2007-10
DIN EN 12697-6 Bituminous mixtures - Test methods for hot mix asphalt -
2003 Part 6: Determination of bulk density of bituminous specimens
+ A1
2007-10
DIN EN 12697-8 Bituminous mixtures - Test methods for hot mix asphalt -
2003-06 Part 8: Determination of the air voids content of bituminous
specimen
DIN EN 12697-10 Bituminous mixtures - Test methods for hot mix asphalt -
2002-03 Part 10: Compactability
DIN EN 12697-11 Bituminous mixtures - Test methods for hot mix asphalt -
2005-12 Part 11: Determination of the affinity between aggregate and
bitumen
DIN EN 12697-12 Bituminous mixtures - Test methods for hot mix asphalt -
2004-03 Part 12: Determination of the water sensitivity of bituminous
specimens
DIN EN 12697-13 Bituminous mixtures - Test methods for hot mix asphalt -
2001-04 Part 13: Temperature measurement
DIN EN 12697-14 Bituminous mixtures - Test methods for hot mix asphalt -
2001-04 Part 14: Water content
DIN EN 12697-17 Bituminous mixtures - Test methods for hot mix asphalt -
2004 Part 17: Particle loss of porous asphalt specimen
+ A1
2007-10
DIN EN 12697-18 Bituminous mixtures - Test methods for hot mix asphalt -
2004-10 Part 18: Binder drainage
DIN EN 12697-19 Bituminous mixtures - Test methods for hot mix asphalt -
2004 Part 19: Permeability of specimen
+A1
2007-10
DIN EN 12697-20 Bituminous mixtures - Test methods for hot mix asphalt -
2004-03 Part 20: Indentation using cube or Marshall specimens
DIN EN 12697-22 Bituminous mixtures - Test methods for hot mix asphalt -
2003 Part 22: Wheel tracking
+ A1
2007-10
DIN EN 12697-23 Bituminous mixtures - Test methods for hot mix asphalt -
2003-10 Part 23: Determination of the indirect tensile strength of
bituminous specimens
DIN EN 12697-24 Bituminous mixtures - Test methods for hot mix asphalt -
2004 Part 24: Resistance to fatigue
+ A1
2007-10
DIN EN 12697-25 Bituminous mixtures - Test methods for hot mix asphalt -
2005-07 Part 25: Cyclic compression test
DIN EN 12697-26 Bituminous mixtures - Test methods for hot mix asphalt -
2004-10 Part 26: Stiffness
DIN EN 12697-27 Bituminous mixtures - Test methods for hot mix asphalt -
2001-04 Part 27: Sampling
DIN EN 12697-28 Bituminous mixtures - Test methods for hot mix asphalt -
2001-04 Part 28: Preparation of samples for determining binder
content, water content and grading
DIN EN 12697-29 Bituminous mixtures - Test method for hot mix asphalt -
2002-12 Part 29: Determination of the dimensions of bituminous
specimen
DIN EN 12697-30 Bituminous mixtures - Test methods for hot mix asphalt -
2004 Part 30: Specimen preparation by impact compactor
+ A1
2007-11
DIN EN 12697-33 Bituminous mixtures - Test methods for hot mix asphalt -
2003 Part 33: Specimen prepared by roller compactor
+ A1
2007-11
DIN EN 12697-34 Bituminous mixtures - Test methods for hot mix asphalt -
2004 Part 34: Marshall test
+ A1
2007-11
DIN EN 12697-35 Bituminous mixtures - Test methods for hot mix asphalt -
2004 Part 35: Laboratory mixing
+ A1
2007-10
DIN EN 12697-42 Bituminous mixtures - Test methods for hot mix asphalt -
2006-02 Part 42: Amount of coarse foreign matter in reclaimed asphalt
DIN EN ISO 10545-13 Ceramic tiles; Part 13: Determination of chemical restistance
1997-12
DIN EN ISO 10545-14 Ceramic tiles; Part 14: Determination of resistance to stains
1997-12
DIN EN 124 Gully tops and manhole tops for vehicular and pedestrian
2005-05 areas
DIN EN 451-1 Method of testing fly ash; Determination of free calcium oxide
2004-05 content
DIN EN 1008 Mixing water for concrete; Specification for sampling, testing
2002-10 and assessing the suitability of water, including water
recovered from processes in the conctete industry, as mixing
water for concrete
DIN 4226-1 Aggregates for concrete and mortar; Normal and heavy-
2001-07 weight aggregates
(withdrawn standard)
DIN 38409-1 Determination of the total solids residue, the filtrate solids
1987-01 residue and the residue on ignition
DIN 38409-2 Determination of the non filterable substances and the residue
1987-03 on ignition
DIN 38409-9 Determination of the settle able matter by volume in water and
1980-07 waste water
Deutscher Ausschuss Additonal water for concrete; Guideline for producing concrete
für Stahlbeton by application of residual water, residual concrete and residual
1995-08 mortar
(New: DIN EN 1008:2002)
Deutscher Betonverein e.V. Additional water for concrete, pretesting and evaluation
1982-01
Eidg. Department des Guideline for the performance of the eluate test for inert
Innern, Schweiz materials and recyclings finished for waste disposal
1983
in connection with:
4 Tests in the area of site and laboratory tests for earthworks and foundation
DIN EN ISO 22476-2: Geotechnical investigation and testing - Field testing - Part 2:
2005-04 Dynamic probing
DIN 18134 Soil; Testing procedures and testing equipment; Plate load test
2001-09
TP BF-StB Part 8.3 Soil; Testing procedures and testing equipment; Plate load test
1992-07 with “Dynamic Plate”
ETAG 001, Part 1 Guideline for European Technical Approval of Metal Anchors
1997-06 for Use in Concrete, Part 1: Anchors in General. Amended
November 2006
ETAG 001, Part 2 Guideline for European Technical Approval of Metal Anchors
1997-06 for Use in Concrete, Part 2: Torque Controlled Expansion
Anchors. Amended November 2006
ETAG 001, Part 3 Guideline for European Technical Approval of Metal Anchors
1997-06 for Use in Concrete, Part 3: Undercut Anchors
ETAG 001, Part 4 Guideline for European Technical Approval of Metal Anchors
1998-07 for Use in Concrete, Part 4: Displacement Controlled
Expansion Anchors. Amended November 2006
ETAG 001, Part 5 Guideline for European Technical Approval of Metal Anchors
2002-03 for Use in Concrete, Part 5: Bonded Anchors. Amended
November 2006
ETAG 001, Part 6 Guideline for European Technical Approval of Metal Anchors
2003-08 for Use in Concrete, Part 6: Anchors for Multiple Use for Non-
Structural Applications
ETAG 001, Annex A Guideline for European Technical Approval of Metal Anchors
1997-06 for Use in Concrete, Annex A: Details of Tests. Amended
October 2001, November 2006
ETAG 001, Annex B Guideline for European Technical Approval of Metal Anchors
1997-06 for Use in Concrete, Annex B: Tests for admissible Service
Conditions: Detailed Information. Amended October 2001,
November 2006
ETAG 001, Annex C Guideline for European Technical Approval of Metal Anchors
1997-06 for Use in Concrete, Annex C: Design Method for Anchorages.
Amended October 2001, November 2006
EN ISO 6988 Metallic and other non-organic coatings - Sulfur dioxide test
1994 with general condensation of moisture
The testing field for which flexible scope of accreditation is granted is charcterised by the
measurands as listed in table 1.
Table 1
Mechanical testing of fasteners in construction and structural engineering;
Determination of the mechanical and structural characteristics of fasteners
abbreviations used:
AC Acceptance Criteria
ACI American Concrete Institute
ASTM American Society for Testing and Materials
BTSA BAUTEST-in-house test method
DIBt German Institute for Civil Engineering
DIN German Institut for Standardization
CUAP Common Understanding for Assessment Procedure
ETAG Guideline for European Technical Approval
EOTA European Organization for Technical Approval
ICC-ES International Code Council - Evaluation Service
ISO International Organization for Standardization
RAL-GZ 655 Quality Assurance Pipe Supports
TR Technical Report