Professional Documents
Culture Documents
SFRA 5000: Sweep Frequency Response Analyzer
SFRA 5000: Sweep Frequency Response Analyzer
Sweep Frequency
Response Analyzer
SFRA 5000
2
• Standalone high accuracy transformer analyzer • USB, RS232 and LAN interfaces
• Leading wideband accuracy: basic 0.02dB with • LCR mode: fully functional LCR meter to measure
class leading high frequency performance transformer LCR parameters
• Leading phase accuracy: 0.05 degrees basic • Various measurement modes: FRA, RMS, LCR, Scope
• Full colour VGA display enabling engineer to • Light and easy to carry
perform and store measurement in the field
without a PC
System Description
SFRA 5000 is a standalone sweep frequency response analyzer
for the high accuracy transformer analysis and integrates the
STS and TD 5000 family test sets. The SFRA 5000 offers both
high precision and portability in a single package, providing
all the accessories required for fast, easy to use, reliable and
repeatable measurements.
Without the need for a PC to compare transformer fingerprints,
the SFRA 5000 decreases test time enabling the engineer
to complete testing in a much shorter period of time than
previously possible. The SFRA 5000 has the ability to utilise
exisiting plots saved to internal memory or USB memory stick
and use them as a reference during a live measurement. If a
problem is detected the test can be interrupted without wasting
any time by comparing the plots real time, point by point.
Input Ranges
• Inputs: 2 x 10Vpk
• Connectors: Ground referenced BNC
• Coupling: AC
• Input: 10Vpk from earth
• Input Ranges: Peak Ranging 3mV, 10mV, 30mV, 100mV, 300mV,
1V, 3V, 10V
• Scaling: 1x10^-9 to 1x10^9
• Ranging: Full auto, Up only or Manual
• Input Impedance: 50 Ohm or 1M Ohm High Impedance
Selectable
L C R Meter
System Specification
• Functions: L, C, R (AC), Q, Tan Delta, Impedance, Phase - Series Sweep
or Parallel Circuit • Functions: FRA, Impedance
• Frequency Range: 5Hz - 5MHz • Steps: Up to 2000 Steps
• Current Shunt: 50R Internal or External • Window: From 50ms with no gap between each log
• Ranges: Inductance, Capacitance, Resistance • Memory: 1 GB Internal or External USB
• Basic Accuracy: 0.5% + 2%/MHz
• Sweep Capability: All AC functions General Information
• Impedance Range: 100mOhm to 100kOhm • Display: 5.7” ¼VGA colour high brightness backlit
• Dimensions (Instrument): 305Hx230Wx45D mm “Tablet Style”
True RMS Voltmeter • Weight (Instrument): 2.7kg
• Channels: 2 (Ground Referenced) • Dimensions (Carry Case): 760mm x 420mm x 150mm
• Frequency Range: 5Hz -5MHz • Weight (Full system including case): 14.9kg
• Measurement: AC RMS, Peak, CF, Surge, dBm • Program Stores: 100, Location 1 loaded on power up
• Basic Accuracy (AC): • Sweep Stores: 2000, all parameters in any sweep function
0.05% range + 0.05% reading + 0.1mV < 1kHz • Remote Operation: Full Capability, Control and Data
0.15% range + 0.15% reading + 0.1mV < 10kHz • Power Supply: 9 – 18V @ 3A, AC adapter or 12V dc from car or
0.5% range + 0.5% reading + 0.025%/kHz + 0.4mV < 5MHz external batteries
www.altanova-group.com
DS SFRA 5000 EN - REV. 01/2019
The product and the information contained herein may be changed at any time without prior notification. This document nor any parts thereof may not be reproduced or transmitted
in any form either electronically or mechanically, including photocopying and recording, without the express written consent of Techimp - Altanova Group Srl and ISA - Altanova Group Srl.