Professional Documents
Culture Documents
Where There's Oil, Where There's Water, There's Xylan
Where There's Oil, Where There's Water, There's Xylan
Xylan keeps wind farms running smoothly... Solves many problems at chemical processing plants...
tion regulations for food contact. substrate, sacrificing themselves by galvanic ac-
Surface preparation tion. These can also be electroplated like zinc or
Xylan coatings (or any thin-film coating) can- cadmium.
not by themselves provide complete corrosion The coating options
protection. For maximum performance, primers 1000 series general-purpose coatings
or pretreatments are required. The best are: 1014 and 1070 were the first Xylan fastener
• Microcrystalline, heat-stable zinc or man- coatings, introduced in the mid-1970s and still
ganese phosphate conversion coating going strong. They provide outstanding lubrication
• Xylan 4000 Series primers (ask Whitford) for predictable makeup and break-out torque,
• Commercial plating, zinc, cadmium and and they have outstanding chemical resistance.
aluminum pretreatments Another advantage: They tolerate temperatures
• Xylar 2 or P51 (ceramic metallics). from -425˚F/-255˚C to +550˚F/+290˚C continu-
Types of corrosion-mitigating coatings ously. Xylan 1070 has added corrosion inhibitors.
These fall into three common categories, all 1400 series coatings
of which Whitford offers: barrier, inhibitive and The 1400 series is the hand-spray version of
sacrificial. the Xylan 5000 series dip/spin products (more on
A barrier coating stands between the metal these later). The 1400 series does not have quite
fastener and the environment. This is usually an the wide temperature range of the 1000 series,
organic coating with fillers that help stop mois- although they have nearly three times the corro-
ture or vapor from permeating the film to the sion resistance applied over any given pretreat-
metal and becoming an electrolyte. ment. Xylan 1400 series coatings can be made in
An inhibitive coating is usually an organic any color, including white. They also have better
coating with corrosion inhibitors, such as zinc chemical resistance to bases than the 1000 se-
phosphates, chromates, and many more. In addi- ries. Xylan 1400 series reaches complete cure at
tion to acting as barriers, they help prevent corro- 400˚F/205˚C, ideal for most coating operations.
sion by using pigments that provide an inhibitive Xylan 1400 series coatings work best for one-
effect, reacting with the absorbed moisture in the time installations, where the fastener will be
coating, then reacting with the steel to passivate coated, installed, and left alone.
it and decrease its corrosive characteristics. 142X series coatings
A sacrificial coating is usually a metal or inor- Xylan 1424 and 1427 are the environmentally
ganic coating containing metal particles (often friendlier combination of the 1000 and 1400 se-
zinc). If the coating is damaged, they act as a ries coatings, combining the best of both. Xylan
sacrificial anode and corrode to protect the steel 142X coatings have all the chemical resistance of
that stainless-steel fasteners can cost twice as all end users ask for and keep a record of the
much as Xylan-coated carbon-steel fasteners. lot number of the Xylan coating used. This, with
A few suggestions the fastener certification document, ensures
Whitford recommends the use of Whitford- traceability should there be a problem.
approved fastener-class coating applicators, For more information, contact your Whitford
highly trained experts in the application of pre- representative (or sales@whitfordww.com) and
treatments, Whitford primers and coatings. ask for our “Guide to Industrial Products”, “How
Further, with today’s emphasis on quality to Reduce Friction with Xylan” and “9 Danger-
(such as ISO 9001-2000), Whitford urges that ous Misconceptions about Xylan 1000 series”.
Blowout preventors
actuate more quickly,
resist chemical attack,
with Xylan 1311
Down-hole tools resist
paraffin fouling, chloride
chemical attack, with
Xylan 1331 Fasteners are
more visible, easily
replaced, with
Xylan 1424, 1014
Umbilical connectors
are easy to spot,
resist corrosion, with Mooring systems
Xylan 1427, 1070 resist corrosion, are
easy to locate, with
Xylan 1427, 1070
oatings of Xylan offer many benefits for of Mexico, Arabian Sea, South China Sea,