This document provides specifications for an inductive sensor that is 83mm long with an 8mm sensing range, IP67 rated enclosure, operates from 10-30V DC, and has a PNP/Normally Open output. It is designed to detect ferrous targets and has mechanical, electrical, and environmental specifications listed.
This document provides specifications for an inductive sensor that is 83mm long with an 8mm sensing range, IP67 rated enclosure, operates from 10-30V DC, and has a PNP/Normally Open output. It is designed to detect ferrous targets and has mechanical, electrical, and environmental specifications listed.
This document provides specifications for an inductive sensor that is 83mm long with an 8mm sensing range, IP67 rated enclosure, operates from 10-30V DC, and has a PNP/Normally Open output. It is designed to detect ferrous targets and has mechanical, electrical, and environmental specifications listed.
This document provides specifications for an inductive sensor that is 83mm long with an 8mm sensing range, IP67 rated enclosure, operates from 10-30V DC, and has a PNP/Normally Open output. It is designed to detect ferrous targets and has mechanical, electrical, and environmental specifications listed.
Inductive sensor DC, direct current M18x83 mm PNP/Normally open (NO) Sn= 8 mm Flush (shielded) ■■
Max. no-load cur. Io undamped 7 mA
Characteristic data Off-state current Ir max. 80 µA Assured operating distance Sa 6,4 Minimum operating current Im 0 mA Eff. switching distance Sr 8 mm Rated short circuit current 100 A Tolerance Sr ±10 % Output resistance Ra 33.0k + D Hysteresis H max. (in % of Sr) 15 % Load capacitance max. (at Ue) 1 µF Repeat accur. R max. (% of Sr) 5% Ambient temperature 0...70 °C Mechanical data Temp. drift max. (% of Sr) 10% Connection type Connector Switching freq. f max. 80 Hz Connector type M12x1-S04 Ready delay tv max. 30 ms Housing material CuZn Utilisation category DC 13 Oberflächenschutz Nickel-plated Function indicator Yes Sensing surface material PBT Power indicator No Mounting length 50,5 mm Short-circuit protected Yes Shock rating Shock, half-sinus, 30 gn, 11ms Protected against polarity reversal Yes Vibration rating 55 Hz, 1 mm ampl., 3x30 min Protected against miswiring Yes Degree of contamination 3 Enclosure Type per IEC 60529 IP67 Tightening torque 25 Nm / 35 Nm Protection class II Principle of operation Inductive Basic data Basic standard IEC 60947-5-2 Electrical data Operating voltage 10...30 V DC Remarks Ripple max. (% of Ue) 15 The sensor is functional again after the overload has been eliminated. Rated operating voltage Ue DC 24 V Embeddable: See installation notes for inductive sensors with extended swit- Voltage drop static max. 2,5 V ching distance 825357. Rated insulation voltage Ui 75 DC With connector, e.g. BKS-S 20-… total length = switch length +18 mm. Effective operating current Ie 200 mA No-load current Io damped max. 12 mA
Internet : www.balluff.com 1 (2)
Balluff Germany : +49 (0) 7158 173-0, 173-370 Print date: 29.10.2013 Balluff USA : 1-800-543-8390 Selection date: 29.10.2013 Balluff China : +86 (0) 21-50 644131 BES 516-326-G-S4-C Ordering code: BES01CT Inductive sensor DC, direct current M18x83 mm PNP/Normally open (NO) Sn= 8 mm Flush (shielded) ■■