Professional Documents
Culture Documents
EET512 Assignment 2 PDF
EET512 Assignment 2 PDF
Faculty of Engineering
Department of Electronics and Communication
Course: EET 212 Antenna and Propagation
Instructors: Prof. Fawzy Ibrahim Asstant: Eng. A. Elsayed
Assignment #2.1
Fundamental Parameters of Antennas
m
er as
pattern in any orthogonal plane is referred to as:
a) Directional b) ominidirectional c) isotropic
co
eH w
3. A radiator having the property of radiating or receiving electromagnetic waves more
o.
rs e
effectively in some directions than in others is referred to as a:
ou urc
a) directional antenna b) ominidirectional antenna c) isotropic antenna
4. The plane that contains the electric-field vector and the direction of maximum radiation is
o
referred to as the:
aC s
5. The plane that contains the magnetic-field vector and the direction of maximum radiation
is referred to as the:
ed d
7. The radiation lobe containing the direction of maximum radiation is referred to as the:
a) Minor b) Major c) Lobe
8. The region most immediate to the antenna where the reactive field predominates is
referred to as the:
a) Far-field region b) Radiating near-field region c) Reactive near-field region
9. The region of an antenna where the angular field distribution is essentially independent of
the distance from the antenna and where the real power density predominates is referred
to as the:
a) Far-field region b) Radiating near-field region c) Reactive near-field region
MIU EET
https://www.coursehero.com/file/35770284/EET512-Assignment-2pdf/ 512 Assignment #2.1 Page 1 of 4
10. The region of an antenna between the reactive near-field and the far-field is referred to as
the:
a) Radiating near-field region b) Fraunhofer region c) Friis region
14. The ratio of the radiation intensity of an antenna to the radiation intensity of an isotropic
source is defined as the:
a) Gain b) Directivity c) Efficiency
m
er as
15. The ratio of 4 Pi over the beam solid angle is defined as the:
co
eH w
a) Gain b) Directivity c) Efficiency
o.
rs e
16. The ratio of the gain to the directivity of an antenna is defined as the:
ou urc
a) Aperture efficiency b) Reflection efficiency c) Radiation efficiency
18. The total maximum directivity is also defined as Do = 4*Pi/WA where WA is referred to
as the:
a) Beam efficiency b) Beam bandwidth c) Beam solid angle
ed d
19. The angular separation between two identical point on an amplitude pattern of an antenna
ar stu
is referred to as the:
a) Bandwidth b) Beamwidth c) Lobe
sh is
20. The range of frequencies within which the performance of an antenna, with respect to
Th
21. The figure traced, as a function of time, of the extremity of a time-varying electric field
vector at a fixed location in space on a plane perpendicular to the direction of
propagation is referred to as the:
a) Gain b) Directivity c) Polarization
22. The polarization of an electric field with two components orthogonal to each other and to
the direction of propagation, of the same amplitude, and with a 90 deg phase difference
is:
a) Linear b) Circular c) Elliptical
MIU EET
https://www.coursehero.com/file/35770284/EET512-Assignment-2pdf/ 512 Assignment #2.1 Page 2 of 4
23. An electric field that has two orthogonal components transverse to the direction of
propagation and a 0 deg or multiples of 180 deg phase difference is:
a) Linear b) Circular c) Elliptical
25. The factor that accounts for the polarization mismatches between an incident wave and a
receiving antenna is referred to as the:
a) Antenna efficiency b) Polarization loss factor c) Polarization ellipse
26. The maximum effective area of an small finite length dipole, with a idealized triangular
m
current distribution, is typically ___________than the physical area of its cross section.
er as
a) equal b) greater c) smaller
co
eH w
27. The maximum effective area of a lambda/2 dipole, with a idealized sinusoidal current
o.
distribution, is typically __________than the physical area of its cross section.
a) equal rs e b) greater c) smaller
ou urc
28. The real parts of the input impedance of an antenna are referred to as the:
a) Radiation resistance b) Radiation reactance c) Reflection resistance
o
aC s
29. The ratio of the radiation resistance over the sum of the radiation resistance and loss
vi y re
30. For a linear wire antenna, its maximum effective length is typically ___________than the
ar stu
physical length.
a) Greater b) smaller c) Equal
sh is
31. For an aperture antenna, its maximum effective area is typically ___________than the
physical area.
Th
32. The ratio of the maximum effective area to the physical area of an antenna is defined as
the:
a) Antenna efficiency b) Reflection efficiency c) Aperture efficiency
33. The ratio of the available power at the terminals of a receiving antenna to the power
density of a plane wave incident on the antenna is referred to as the:
a) Effective length b) Effective area c) Directivity
34. The scattering characteristics of a radar target are usually represented by the:
MIU EET
https://www.coursehero.com/file/35770284/EET512-Assignment-2pdf/ 512 Assignment #2.1 Page 3 of 4
a) Gain b) Directivity c) Radar cross section
35. The equation that relates the received power to the transmitted power of two antennas,
separated by a large distance R, is referred to as the:
a) Radar range b) Friis transmission c) Antenna temperature
36. The equation that relates the received power to the transmitted power of two antennas,
after the signal has been scattered by a radar target, is referred to as the:
a) Radar range b) Friis transmission c) Antenna temperature
m
er as
co
eH w
o.
rs e
ou urc
o
aC s
vi y re
ed d
ar stu
sh is
Th
MIU EET
https://www.coursehero.com/file/35770284/EET512-Assignment-2pdf/ 512 Assignment #2.1 Page 4 of 4