Professional Documents
Culture Documents
Samsung Monitor LCD 743N 743B 943N 943B Chassis LS17MY LS19MY Service Manual
Samsung Monitor LCD 743N 743B 943N 943B Chassis LS17MY LS19MY Service Manual
SERVICE Manual
1. Precautions
2. Product specifications
4. Troubleshooting
6. Wiring Diagram
7. Schematic Diagram
Refer to the service manual in the GSPN (see the rear cover) for the more information.
Contents
1. Precautions............................................................................................................... 1-1
1-1. Safety Precautions.......................................................................................................... 1-1
1-2. Servicing Precautions...................................................................................................... 1-2
1-3. Static Electricity Precautions........................................................................................... 1-2
1-4. Installation Precautions................................................................................................... 1-3
2. Product specifications............................................................................................. 2-1
2-1. Feature & Specifications.................................................................................................. 2-1
2-2. Spec Comparison to the Old Models............................................................................... 2-3
2-3. Accessories..................................................................................................................... 2-4
2-4. Accessories (Sold separately)......................................................................................... 2-4
3. Disassembly and Assembly.................................................................................... 3-1
3-1. SIMPLE STAND Disassembly......................................................................................... 3-1
3-2. HAS STAND Disassembly............................................................................................... 3-4
4. Troubleshooting....................................................................................................... 4-1
4-1. Troubleshooting............................................................................................................... 4-1
4-2. When the Power Does Not Turn On................................................................................ 4-2
4-3. When the screen is blank (Analog).................................................................................. 4-4
4-4. When a blank screen is displayed (Digital)-743B / 943B only ........................................ 4-7
4-5. Faults and Corrective Actions........................................................................................ 4-10
4-6. Adjustment..................................................................................................................... 4-11
5. Exploded View & Part List....................................................................................... 5-1
5-1. SIMPLE STAND Exploded View....................................................................................... 5-1
5-2. SIMPLE STAND Parts List................................................................................................ 5-3
5-3. HAS STAND Exploded View............................................................................................. 5-8
5-4. HAS STAND Parts List.................................................................................................. 5-10
6. Wiring Diagram......................................................................................................... 6-1
6-1. Wiring Diagram - Main Board.......................................................................................... 6-1
6-2. Wiring Diagram - IP Board............................................................................................... 6-2
6-3. Connector Functions....................................................................................................... 6-3
6-4. Cables............................................................................................................................. 6-3
7. Schematic Diagram.................................................................................................. 7-1
7-1. 743N/943N -Circuit Descriptions..................................................................................... 7-1
7-2. 743N/943N Schematic Diagrams (Scaler Part)............................................................... 7-3
7-3. Schematic Diagrams (Power Flowchart)......................................................................... 7-4
7-4. Schematic Diagrams (IP Board)...................................................................................... 7-5
7-5. Schematic Diagrams (Main PBA)................................................................................... 7-7
GSPN (Global Service Partner Network)
Area Web Site
North America http://service.samsungportal.com
Latin America http://latin.samsungportal.com
CIS http://cis.samsungportal.com
Europe http://europe.samsungportal.com
China http://china.samsungportal.com
Asia http://asia.samsungportal.com
Mideast & Africa http://mea.samsungportal.com
1. Precautions
1-1. Safety Precautions
Follow these safety, servicing and ESD precautions to prevent damage and to protect against potential hazards such as
electrical shock.
1-1-1. Warnings
1. For continued safety, do not attempt to modify the circuit board.
2. Disconnect the AC power and DC power jack before servicing.
LEAKAGE
DEVICE
CURRENT
UNDER
TESTER
TEST
TEST ALL
EXPOSED METAL
SURFACES
2-WIRE CORD
1-1
1. Precautions
1-2
1. Precautions
1-3
1. Precautions
Memo
1-4
2. Product specifications
2. Product specifications
2-1. Feature & Specifications
Model 743N / 743B / 943N / 943B
743NX / 743BX / 943NX / 943BX
Feature
Specifications
Item Description
LCD Panel TFT-LCD panel, RGB vertical stripe, normally white transmissive,
17” wide Viewable 0.264(H)mm * 0.264(V)mm pixel pitch
19” wide Viewable 0.294(H)mm * 0.294(V)mm pixel pitch
Scanning Frequency Horizontal : 30 kHz ~ 81 kHz (Automatic)
Vertical: 56 Hz ~ 75 Hz(WSXGA+ : 60Hz)
Display Colors 16.7 Million colors
Maximum resolution Horizontal: 1280 Pixels
Vertical: 1024 Pixels
Input Signal 743N / 943N : Analog
743B / 943B : Analog & DVI
Input Sync Signal Seperate H/V sync, Composite H/V, Sync-on-Green
Level: TTL level
Maximum Pixel Clock rate 135 Mhz
Active Display 17”: 337.92(H) x 270.336(V)
(Horizontal/Vertical) 19”: 376.32(H) x 301.056(V)
AC power voltage & Frequency AC 110V~130V, 60Hz & AC, 200V~240V 50Hz
Power Consumption 743N/743B: 34W
943N/943B: 38W
Dimensions Set -17” 368.0 x 68.4 x 307.4 mm [Without Stand]
(W x D x H) SIMPLE STAND
368.0 x 185.0 x 386.9 mm [With Stand]
368.0 x 65.5 x 307.4 mm [Without Stand]
HAS STAND
368.0 x 190.0 x 365.9 mm [With Stand]
Dimensions Set -19” 405.6 x 66.7 x 335.2 mm [Without Stand]
(W x D x H) SIMPLE STAND
405.6 x 200.0 x 413.9 mm [With Stand]
405.6 x 63.8 x 335.2 mm [Without Stand]
HAS STAND
405.6 x 190.0 x 379.5 mm [With Stand]
Weight -17” SIMPLE STAND 3.6 kg / 4.7 kg
(Set/Package)
HAS STAND 4.75 kg / 6.2 kg
2-1
2. Product specifications
Specifications
Item Description
Weight -19” SIMPLE STAND 3.8 kg / 4.95 kg
(Set/Package)
HAS STAND 4.85 kg / 6.5 kg
Environmental Considerations Operating Temperature: 10˚C ~ 50˚C(50˚F ~ 122˚F)
Operating Humidity : 10% ~ 90%
Operating Temperature: -20˚C ~ 45˚C(-4˚F ~ 113˚F)
Operating Humidity: 5% ~ 90%
Note: Designs and specifications are subject to change without prior notice.
2-2
2. Product specifications
Design
Magic Color
Magic Color
Color Effect
Feature Magic Bright3
Magic Bright3
Magic Tune (Premium)
Magic Tune (Premium)
*Color Effect
- Grey scale: Images are displayed in a grey tone on the screen.
- Green: Images are displayed in a green tone on the screen.
- Aqua: Images are displayed in a blue tone on the screen.
- Sepia: Images are displayed in a brown tone on the screen.
Image Size : : If the resolution is not wide resolution, this option allows the screen size to be selected as normal or wide.
2-3
2. Product specifications
2-3. Accessories
Product Description Ccde. No Remark
Warranty Card
BH68-00633B
(Not available in all locations)
743N/943N
Power Cord 3903-000042
743B/943B
2-4
3. Disassembly and Assembly
3-1
3. Disassembly and Assembly
LAMP
WIRE
FUNCTION
3-2
3. Disassembly and Assembly
3-3
3. Disassembly and Assembly
2. T
urn the monitor over. Remove the two (2) screws
that hold the stand in place and then remove the
stand.
3. The following steps are the same as steps 2 to 9 for disassembling the SIMPLE stand.
3-4
4. Troubleshooting
4. Troubleshooting
4-1. Troubleshooting
1. Before troubleshooting, setup the PC ‘s display as below.
• Resolution: 1280 x 1024
• H-frequency: 65 kHz
• V-frequency: 60 Hz
2. If no picture appears, make sure the power cord is correctly connected.
3. Check the following circuits.
• No raster appears: Function PBA, Main PBA, I/P PBA
• 55V develop but no screen: Main PBA
• 5V does not develop: I/P PBA
4. If you select Brightness adjust menu and push the “ (Enter/Source)” button for 5 seconds, the monitor automatically
returns to factory reset.
4-1
4. Troubleshooting
- W
hen turning on the Power button after connecting the power cable, the LED at the front of the
monitor does not operate.
Major - Check the IP board power fuse and the IP board output power.
checkpoints - Check the connections for the IP board and the Main board inside the monitor.
-C
heck the Main board power part and also check whether there is any abnormal output at any of
the other output terminals.
Yes
Yes
Caution Make sure to disconnect the power before working on the IP board.
4-2
4. Troubleshooting
4-3
4. Troubleshooting
- Even though the LED power turns on, the screen is blank when connecting the VGA cable.
Major - Check the D-sub cable connections.
checkpoints - Check whether the LVDS cable is connected correctly to the panel.
- Check whether the lamp connector of the panel is connected correctly to the IP board.
② Do the RGB inputs appear at R111, No Check the R111, R114, and
R114, and R118? R118 input terminals.
Yes
Caution Make sure to disconnect the power before working on the IP board.
4-4
4. Troubleshooting
4-5
4. Troubleshooting
① ③
4-6
4. Troubleshooting
- Even though the LED power turns on, the screen is blank when connecting the DVI cable.
Major - Check the DVI cable connections.
checkpoints - Check whether the LVDS cable is connected correctly to the panel.
- Check whether the lamp connector of the panel is connected correctly to the IP board.
Yes
Caution Make sure to disconnect the power before working on the IP board.
4-7
4. Troubleshooting
4-4-1. Circuit diagrams and waveforms (DVI) when no screen is displayed on the
monitor
4-8
4. Troubleshooting
① ②
4-9
4. Troubleshooting
Symptoms: When the monitor is turned on, * A full white pattern is a feature of the
only a full white pattern is displayed TN panel and is displayed when no
continually regardless of the signals. video signals are supplied.
Corrective Actions: R
eplace or reconnect the LVDS
cable correctly so that video
signals can be supplied to the
panel.
Symptoms: There is no sound when the earphones *If the speaker works but the
are connected. earphones do not work, the Audio
Assy is out of order.
Causes: This fault occurs when the Audio Assy is
out of order.
4-10
4. Troubleshooting
4-6. Adjustment
4-6-1. Service Adjustment Conditions
1. Precautions before a Service Adjustment
1) Check whether the devices for the service adjustment are operating normally.
2) Secure a space that is sufficiently wide for disassembling the monitor.
3) Prepare a soft mat on which the monitor will be disassembled.
Entering: Menu Brightness 0 Contrast 0 Hold down the Enter button for five (5) seconds.
Monitor needing
adjustment
MTI-2031
DDC Manger
Parallel
Connector
(25P Cable)
Connect Monitor
(Signal Cable)
4-11
4. Troubleshooting
Panel Information
Scaler Vender
Micom version
Micom checksum
4-12
4. Troubleshooting
4-13
4. Troubleshooting
4
5
4-14
4. Troubleshooting
1) Options Checking.
-. Manufacture : MSTAR
-. Device Type:TSUM16_ROM128K_ext_flash
-. Communication Port: DSUB15 (Analog)
-. External Memory: PMC25LV010E
4-15
4. Troubleshooting
4) After the Program and Verify completed, execute hard power off/on.
4-16
5. Exploded View & Part List
M0027
M0013
M0003
CIS4
M0006
M0174
M0215
M0081
BN63-03973A
T0514
M0081
T0003
5-1
5. Exploded View & Part List
5-2
5. Exploded View & Part List
Level Location No. Code No. Description & Specification Q’ty SA/SNA Remark
LS19MYAKBB/
943N,SAL1/S19B7-LMY,19,LCD-MO,NETHERLAND
EDC
5-3
5. Exploded View & Part List
Level Location No. Code No. Description & Specification Q’ty SA/SNA Remark
5-4
5. Exploded View & Part List
Level Location No. Code No. Description & Specification Q’ty SA/SNA Remark
5-5
5. Exploded View & Part List
Level Location No. Code No. Description & Specification Q’ty SA/SNA Remark
5-6
5. Exploded View & Part List
Level Location No. Code No. Description & Specification Q’ty SA/SNA Remark
5-7
5. Exploded View & Part List
Level Location No. Code No. Description & Specification Q’ty SA/SNA Remark
5-8
6. Wiring Diagram
6. Wiring Diagram
6-1. Wiring Diagram - Main Board
6-1
6. Wiring Diagram
LVDS Connector
(Connect to Panel)
3708-001150
EEPROM
3711-003847
IP board
Flash memory
3701-001173 3701-001219
Function Connector
(Connect to IP-Board)
6-2
6. Wiring Diagram
CN1 ~ CN4 In Transmits the lamp current (6mA ~ 7mA) generated in the inverter to the lamp of the panel.
* When a problem occurs: The Blank Screen error may occur.
CN400 Transmits the LVDS signals from the main board to the panel.
* When a problem occurs: The Blank screen and No Power errors may occur
6-4. Cables
Use LVDS 30P FFC cable (17”) LVDS 30P FFC cable (19”)
Photo
6-3
6. Wiring Diagram
Memo
6-4
7. Schematic Diagram
7. Schematic Diagram
7-1. 743N/943N -Circuit Descriptions
Scaler Besides the ADC, LVDS, and scaling part, an MCU is embedded as well. All of 743N / 943N :
IC200 them are integrated into one chip. SE717M-LF
Flash
Stores the MCU program embedded in the scaler. It is of a flash type and
Memory MX25L1005
rewritable.
IC201
IC203 Stores the OSD and various timing values. 24C08
IC202 The memory to which DIGITAL DDC data is input 24C02
An IC that receives DC voltage inputs. It is used in circuits that stabilize the DC NCP117DT18T5G
Regulator
voltage. APL1117-33VC
7-1
7. Schematic Diagram
Scaler Besides the ADC, LVDS, and scaling part, an MCU is embedded as well. All of 743B / 943B :
IC200 them are integrated into one chip. SE756M-LF
Flash
Stores the MCU program embedded in the scaler. It is of a flash type and
Memory MX25L1005
rewritable.
IC201
IC203 Stores the OSD and various timing values. 24C08
IC202 The memory to which DIGITAL DDC data is input 24C02
An IC that receives DC voltage inputs. It is used in circuits that stabilize the DC NCP117DT18T5G
Regulator
voltage. APL1117-33VC
7-2
7. Schematic Diagram
7-3
7. Schematic Diagram
7-4
7. Schematic Diagram
7-5
7. Schematic Diagram
Inverter Part
7-6
7. Schematic Diagrams
7-3
7. Schematic Diagrams
Memo
7-4