Professional Documents
Culture Documents
Electrical Test Instruments: PAT400 Series
Electrical Test Instruments: PAT400 Series
Electrical Test Instruments: PAT400 Series
Innovative
installation
AVO410 multimeter testers for your
A delightful new tester from the inventors of multimeters, offering true rms local standards
measurement and CAT IV safety.
The choice
of European
professional
testers MFT1800
series
Extra fast
portable
appliance tester
PAT400 series
True RMS
multimeter
AVO410
MFT
MIT300 series with
Electrician’s
certification
insulation
tester
The new Megger insulation testers are like no other tester you have used Electrical
test kits
Industrial
The Megger insulation testers will take the bashing that Your safety is Megger’s number one concern insulation
Part P
testers
testers receive when they are on site These safety features look after you and the tester – kits
They are rubber armoured and have an integral solid lid to n Safety interlock to prevent unsafe connection of the test Combined
cover the display. leads loop and
High voltage
Handy neck strap for hands Clear range selector for poor Double hinge keeps screen Shutter to prevent hazardous RCD testers
The lid has a heavy-duty hinge that locks away underneath n Safe contact detector keeping you and your tester safe insulation
free operation light conditions free from scratches or swings lead combinations testers
when in use, making it easy to use and impossible to lose. during continuity testing if it’s accidentally connected to a under to snap out of sight
And you don’t need to pull out the test leads to shut the lid. live circuit
n Live voltage warning alerts the user to a circuit voltage over
Low
The Megger MIT insulation testers are easy to use and quick 25 V when insulation testing resistance
to learn n Safety lockouts – MIT300 MIT310 MIT320 MIT310A MIT330 testers
Analogue
There are no buried functions, so it is easy to use these new – Prevents continuity testing on live circuits Insulation testing 250 V n n n n n
insulation testers. – Prevents insulation testing when circuit voltage is 500 V n n n n n
The colour coding helps test selection, speeding up testing time greater than 50 V 1000 V n n n n Earth loop
and helping you identify faults fast. Test range 1000 MΩ 1000 MΩ 1000 MΩ 1000 MΩ 1000 MΩ tester
Hands free operation Insulation limit alarm 0.01 MΩ to 1000 MΩ n n
The quick start guide in the lid keeps all the basic information
MIT300 series insulation testers are well balanced to hang Continuity testing Continuity to 100 Ω n n n n n
at hand if you need it.
comfortably around your neck enabling hands free operation Continuity buzzer n n n n n Earth
when you need it. Lead null to 9 Ω n n n <1⁄2 Ω n resistance
Adjustable buzzer 1 to 100 Ω n n testers
The continuity test and buzzer start automatically when you
How it works connect to a circuit, saving you time.
Voltage measurement
Audible buzzer disable
Volts AC/DC
n n
600 V 600 V 600 V 600 V
Insulation tests can be started using a switched probe or the Resistance measurement 10 Ω to 1 MΩ range n n
test button on the front of the tester. Electrical
The best place for a test button is on the probe. 10 Ω to 2 KΩ range n test kits
By using a switched probe rather than a standard one Features Voltage warning n
Default voltmeter n n n n
there is no longer a need to look away from the probe
Backlit display n n
to find the TEST button on the instrument, or use a third
Backlit selector ranges n n
hand if both are already holding the probes. Simply press Accessories
Locking test button n n n n n
the button already under your finger. Auto power-down n n n n
Definitely safer and quicker. Switched test probe n n
Data storage n Voltage
Download via USB port n detector,
IP54 weatherproof n n n n n Socket
Accepts rechargeable batteries n n n n n tester
Included accessories 2 wire lead set n n n n n
Free calibration certificate n n n n
Warranty upgradeable to 3 years FREE n n n n n Clamp and
multimeters
Special features
Appliance
testers
n Easy to use
Other
n Safe 1002-015 1001-884 Megger
2-wire 500 mA fused Remote switched probe products
n Weatherproof test lead set with special plug
n USB downloading on MIT330
See page 8 and 9 for our industrial About
Megger
insulation testers
Voltage
MIT220 MIT230 detector,
Socket
250 V and 500 V test ranges to 1000 MΩ n tester
250 V, 500 V and 1000 V test ranges to 1000 MΩ n
Continuity (200 mA) measurement n n
Voltage detection n n Clamp and
Intelligent safety system n n multimeters
Fast buzzer range n n 1002-015 1002-491
2-wire 500 mA fused Red and black probes
Display backlight n n
test lead set and clips
CATIII 600 V n n Solar and
earth
IEC61010 n n
leakage
Warranty upgradeable to 3 years FREE n n testing
specifies the performance of the guard terminal, so you can’t initiate a test by simply being knocked accidentally and 5.0 kV n n n n n
Accessories
operation to 3000 m with CATIV 600V protection a user’s safety 2.5 kV n n n n n
know it really is doing its job correctly. Remember the guard
is ensured. Megger testers have the merits of a stable voltage 1.0 kV n n n n n
terminal performance is an integral part of your measurement
500 V n n n n n
uncertainty. 10 kV testers are capable of measuring insulation supply and high specification guard terminal to ensure accurate
250 V n n n n n Voltage
resistance up to 35 TΩ and 5 kV testers up to 15 TΩ. This means results. detector,
Variable test voltages 10 V steps from 40 V to 1 kV n n
that you are able to spot deteriorating insulation early, trend 10 V steps from 100 V to 1 kV n n n
Socket
tester
its deterioration and predict when it will need replacement, 25 V steps from 1 kV to max
making for a truly planned approach to maintenance. test voltage n n n n n
About
Megger
DLRO accessories
Appliance
testers
Cable fault
locator
Other
1000-809 Megger
Kelvin lead kit available products
in 30, 50 and 100 m
length
About
Megger
n Will not take out 6 A MCBs LTW315 LTW325 LTW335 LTW425 LT300
Loop testing 2-wire non-tripping loop testing n n n n Clamp and
n Clear easy to read display 2-wire high current, fast, loop testing n n n n n multimeters
110 V to 280 V applications n n n n n
n 3-phase safe 50 V to 440 V applications n n n n
50 V to 550 V applications
n 50 V to 440 V operation n Solar and
Phase to phase testing n n n n earth
n PFC display PFC range 20 kA n n n n n leakage
PFC range 40 kA n testing
n Stable test results Resolution 0.01 ohm n n n n n
Resolution 0.001 ohm n
n USB downloading on LTW335 Automatic noise detection n n n n Appliance
Automatic test start n n n n n testers
Frequency measurement n n n n n
16 Hz to 400 Hz operation n
Max Zs display n n n
Max R1 + R2 display n n n Cable fault
locator
Features Back lit display n n n n
Built-in fold away cover n n n n n
Quick start guide in cover n n n n n
Test result storage n Network
Downloading of test results n performance
Accepts rechargeable batteries n n n n n tester
Included accessories Storage and carry case n n n n n
2-wire lead set complete with crock clips n n n n Optional
Mains socket lead set n n n n Optional Other
Free calibration certificate n n n n Megger
products
Standards IEC61010-1 CATIV 300 V n n n n n
EN61557 n n n n n
Weather- and dust-proof to IP54 n n n n n
Warranty upgradeable to 3 years FREE n n n n n About
Megger
n Selectable 25 V or 50 V output
2 pole bond test n n n n n n n Earth
Four pole soil resistivity tester Stakeless test n n n n resistance
DET4T n Complete with lead and stake kit Power Rechargeable n n n testers
n Simple one button operation Dry cells n n n n
n 2,3 and 4 pole testing selected by turning a switch
n Hardwearing carry case Warnings Excessive noise n n n n n n n
n Extended test range to 200 kΩ option Potential spike resistance high n n n n n n n
n Delivered with calibration certificate Electrical
n Dry cell or rechargeable versions Current spike resistance high n n n n n n n test kits
n IP54 rated
n User selectable test frequency and voltage option Resistance range 0.010 Ω – 0.01 Ω – 0.01 Ω – 0.01 Ω – 0.01 Ω – 0.01 Ω – 0.01 Ω – 0.05 Ω – 0.05 Ω –
1999 kΩ 200 kΩ 200 kΩ 20 kΩ 20 kΩ 2.0 kΩ 2.0 kΩ 1.5 kΩ 1.5 kΩ
n Attached Rod Technique (ART) option
DET3TD Resolution 0.001 Ω 0.01 Ω 0.01 Ω 0.01 Ω 0.01 Ω 0.01 Ω 0.01 Ω 0.01 Ω 0.01 Ω
n Stakeless measurements option
Earth current range
The DET3TD is a popular choice with contractors due to Accessories
n Automatic circuit checking 0.5 mA to 35 A n n
their toughness. Capable of performing 2 and 3 pole
n Comes with Power DB Lite earth testing forms that do the 0.5 mA to 19.9 A n n n
measurements these instruments are great for testing both
calculations for you Test frequency 105 Hz – 94, 105, 94, 105, 128 Hz 128 Hz 128 Hz 128 Hz 1390 Hz 1390 Hz
installation and lightning protection ground electrode 160 Hz 111 and 111 and 128 Hz 128 Hz 128 Hz 128 Hz 1390 Hz 1390 Hz
n Backlit display Voltage
systems. 128 Hz 128 Hz detector,
n Weather and dust proof to IP54 The instrument is tough in every way, built to work in the Socket
Noise rejection 40 V peak to peak n n n n n n n
n Safety rated CATIV 100V tester
roughest of outside conditions, and built to give the user Test results storage n n
n Complete with lead and stakes packed in a hard wearing a high level of electrical safety. This is demonstrated by Downloadable test results n
carry case specifications such as IP54 ingress protection, high noise IEC61010-1 safety rating CAT III CAT IV CAT IV 1 CAT IV CAT IV CAT IV CAT IV CAT IV CAT IV
300 V 100 V 100 V 100 V 100 V 100 V 100 V 600 V 600 V Clamp and
n Delivered with a FREE calibration certificate immunity, and CATIV safety. multimeters
Weather- and dust-proof to IP54 IP54 IP54 IP54 IP54 IP54 IP54 IP54 IP30 IP30
Features
DET4 and DET3 series
Cable fault
accessories locator
Network
performance
tester
Other
Megger
products
1001-811 6220-803 DET14C flat jaw interface makes Elliptical jaw shape improves
3-wire earth lead test set 4 right angled adaptors for long service life access
About
Megger
MTK PSI410
window of a speeding van on the M69 motorway. The case MFT
contained the latest in electrical testing technology, in the with
form of a Megger MTK320 electrical contractors’ test kit Electrician’s
certification
insulation
Megger MTK300 test kits give electrical contractors all they that had been stolen from a vehicle belonging to a leading Electrical work on commercial and industrial installations often tester
need to perform electrical inspection and testing for single and electrical training provider. requires working on motorised machinery with three phase Electrical
three phase operations. The kits consist of three instruments, supplies. Correct sequence of the phases is important with test kits
Despite a rough landing at speeds close to
an MIT insulation tester, an LTW earth loop tester and an certain motors and pumps as damage to brakes and valves will Industrial
70 mph, the three testers that make up the kit survived
RCDT residual current device tester, each with batteries fitted, occur in minutes with incorrect phasing. insulation
their ordeal completely unscathed. A thorough check in the Part P
in a smart case, with a full set of test leads and calibration testers
Megger calibration laboratory showed that none of the The Megger PSI410 phase rotation indicator provides rapid kits
certificates. Three kits are available: MTK310, MTK320 instruments needed even the slightest of adjustments. indication of correct phase sequence utilising a three bi- Combined
and MTK330. loop and
Now that’s what we call tough! coloured LED display and a specific audible tone. Clockwise High voltage
rotation is indicated by clockwise rotating green LEDs with a RCD testers
insulation
continuous tone and counter clockwise rotation has counter testers
clockwise rotating red LEDs and a warbling tone.
The unit has been designed to provide a slow rotational speed Low
MTK310 MTK320 MTK330 of the display to allow easy recognition of the direction of resistance
Insulation testing (see pages 10 and 11 for technical data) MIT310 n rotation. testers
MIT320 n
Dual phase colour coding has been adopted for the PSI410 to
MIT330 n
allow ease of use on both Brown / Black / Grey and Red / Yellow
Loop testing (see pages 12 and 13 for technical data) LTW315 n Earth loop
/ Blue colour coded supplies.
LTW325 n tester
LTW335 n The PSI410 also features a triple bi-coloured LED display
RCD testing (see pages 14 and 15 for technical data) RCDT310 n that indicates that all three phases are present. A green LED
RCDT320 n indicates the phase is present while a red LED shows a missing
Earth
RCDT330 n phase connection. The unit has a tough case designed for an resistance
Rubber armoured n n n industrial environment and is supplied with long fused test testers
Weatherproof to IP54 n n n leads with croc-clips and prods.
Test leads included n n n
Calibration certificates included n n n The PSI410 is self powered from the supply and requires no
Warranty upgradeable to 3 years FREE n n n batteries. Electrical
test kits
Batteries included n n n
Smart brief case n n n
n LED clockwise and counter clockwise phase rotation
indication
n Audible indication of direction Accessories
n Phase condition LEDs
n MIT310 Insulation and continuity tester n Dual phase colour identification Voltage
detector,
n LTW315 Earth loop tester n CAT IV 600 V Socket
n Warranty upgradeable to 3 years FREE tester
n RCDT310 RCD tester
test kit
n MIT330 Insulation and continuity tester as MIT320 but
test lead and coil Appliance
with storage and downloading testers
n 30 metre and 50 metre versions
n LTW335 Earth loop tester as LTW325 but with storage
n Suitable for direct R2 measurements
and downloading
n Easy to re-wind cable with tangle-free cable guide
n RCDT330 RCD tester as RCDT320 but with storage
and downloading n Compact and light design Cable fault
locator
Compact extension test lead for direct R2 measurements so
eliminating the need for crossover connections. The furthest
point in the circuit can be easily verified, and every earth point
on the circuit checked for integrity prior to energising. Network
performance
tester
Code
50 m extension lead, green, with 2.4 mm safety plug ETL50 Other
30 m extension lead, green, with 2.4 mm safety plug ETL30
Megger
products
About
Megger
TPT320
MFT
VF3 AC voltage detector with
Electrician’s
certification
insulation
n AC / DC voltage from 12 to 690 V tester
Low power consumption, offering many hours of flashlight
n Continuity Electrical
illumination from one set of alkaline batteries.
test kits
Identifying live conductors, finding a break in a wire, verifying n Phase rotation
Industrial
a blown fuse, and detecting the presence of a.c. voltage. n LCD / LED display insulation
n Bright LED torch Part P
testers
kits
n CAT IV 600 V rating Combined
The new TPT320 features LED and LCD displays that provide loop and
High voltage
RCD testers
both AC and DC voltage measurement from 12 to 690 volts. In insulation
testers
addition, a continuity range of 0 to 500 kOhm is included.
Designed to be used on RCD and RCBO protected circuits
without causing tripping, the unit also has the ability to Low
resistance
indicate phase rotation, has an audible sounder to confirm testers
continuity as well as the presence of voltage. With a built in
high power LED torch, IP64 case and CAT IV 600v safety rating,
the TPT320 is the ideal site tool to conform with current safe Earth loop
isolation procedures. An additional safety feature is the ability tester
to indicate the presence of voltage even in the event of the
internal battery being exhausted.
Earth
resistance
SIA45 Electrical
test kits
n Colour
remains intact
coded for simplicity of use
Proving unit Voltage
detector,
n Makes
n Remains
testing easy where access to socket is limited
safe if left inadvertently connected to live supply
MPU690 Socket
tester
Network
performance
tester
Other
Megger
products
About
Megger
DCM340 Electrical
n d.c. current range test kits
n Frequency counter
n Analogue bar graph
AVO410 n
n
Back light
Large jaws
Accessories
V d.c. 1000 V 1000 V 1000 V 200 V, 600 V 200 V, 1000 V 400 V, 600 V
Resistance range Ω 40 M 40 M 600, 6 k, 60 k, 200, 2 k, 200 k, 200, 2 k, 200 k, 400
600 k, 6 M 60 M 2 M, 20 M 2 M, 20 M Network
Continuity range Buzzer n n n n n n performance
tester
Diode n n
Auto-ranging n n n n n n
Backlit display n n n
Other
Data hold n n n n n
Megger
Max/min hold n n n n products
Conductor size 27 mm 27 mm 16 mm 35 mm
1002-001 1002-015
Other Warranty upgradeable
Replacement test lead set 500 mA fused test lead set
to 3 years FREE n n n
About
Safety rating CATIII 600 V CATIII 600 V CATIV 600 V CATIII 600 V CATIII 600 V CATIV 600 V CATIII 600 V
Megger
MFT
with
DCM300E is perfect for measuring of earth leakage current in a feature speeds testing when moving from one room to n Simple push button control
circuit where the RCD repeatedly trips out. The measured result another, restarting in exactly the same menu location where
it was left. Low
will quickly identify whether the tripping is caused by excessive resistance
leakage current, or if the RCD itself is faulty. PAT310 is the PAT tester for those electricians who testers
SEE TABLE ON PAGE 27 for SPECIFICATION
occasionally do testing and don’t want the complexity
of database management and are happy to make out
certificates by hand. Earth loop
PAT350 is similar to the PAT310 but with the added benefit tester
DCM300E
Current ranges a.c 30 mA, 300 mA, 30 A, 300 A.
of flash testing. Because of its high through-put capabilities
Photovoltaic kits Data hold
Max conductor size
n
40 mm
and the speed at which it gives results, it is ideal for
applications such as tool hire companies and service centres. Earth
Safety rating CATIII 300 V Of particular interest to tool hire companies, as well as resistance
PVK300 series Warranty upgradeable to
3 years FREE n
service and repair organisations, is the PAT300 series ability
testers
PVK300 kits supply all the instrumentation you require in to run high current bond tests virtually continuously,
addition to your MFT to site, commission and test a solar PV without the fear of the tester over-heating.
Electrical
installation to IEC62446, packed in a single pouch. n Instant re-start
test kits
PVK320 includes an auto-ranging, CAT IV, 10 A d.c. AVO410 n 200 mA bond test and the option of 25 A and 10 A bond
multimeter that allows the short circuit current of a panel to be test on the PAT350
read directly, as well as the PVM210 n Test lead null
PVK330 includes the DCM340 a 600 A a.c./d.c clamp n Flash testing at a choice of 1.5 kV or 3 kV (PAT350 only) Accessories
multimeter which speeds the measurement of array stings n Repeated high current bond testing possible
with out the need for disconnection. It can also measure d.c. n Insulation testing at 250 V and 500 V
voltages to 600 V.
n Fully tests appliances to what ever the standard is Voltage
detector,
n Extension and IEC lead testing including polarity, earth Socket
PVK320 PVK330 continuity, L-N continuity and L-N-E insulation tester
n Standard differential leakage test plus
AVO410 CAT IV multimeter
DCM340 Clamp multimeter
n
n Solar PV testing Irradiance n Protective conductor or touch current leakage test
Clamp and
meter n Substitute earth leakage test at 40 V a.c.
PVM210 Irradiance meter n n
multimeters
MC3 to MC4 adaptor testleads n n n Full plug-in 30 mA RCD testing ½ x IDN, IDN, 5 x IDN
MC4 to 4 mm plug testleads n n
n Integral fuse checker
About
Megger
Clamp and
multimeters
Solar and
earth
leakage
testing
Appliance
testers
Network
performance
tester
Other
Megger
products
6231-652 1002-015 2003-200 2003-189 2003-196
Miniature clip test 500 mA fused test lead set d.c. vehicle charge lead Kit carry bag Remote identifier #5.
There are 8 available About
Megger
MFT
with
Electrician’s
Made in Europe certification
insulation
TTR25 Hand-held n M
easures turns ratio, excitation current and polarity of windings in single- and three-
tester
single and three-phase phase distribution and power transformers (tested phase by phase), potential and current All the products shown in this catalogue are engineered
Electrical
transformer tester and made at our factory in England. If you’ve ever visited
transformers, and tapped transformers. User can operate the test set one handed. Eliminates test kits
the need to bend down to operate the instrument and speeds up testing time. It is rugged, England by ferry, you’ve probably seen our building – there’s Industrial
with a high impact, shock resistant case, yet very light at 870 g. a big Megger logo on our car park. Everyone hears how insulation
Part P
testers
manufacturing is moving out of Europe to Asia, but Megger
kits
employs hundreds of people in Sweden, Germany, Switzerland Combined
and France. As a professional electrician, you have a right to loop and
High voltage
demand the very best electrical test equipment. By specifying RCD testers
insulation
Megger, not only will you get the best. testers
EZ-Thump cable n A
practical and efficient solution for the fast on spot fault location. The EZ-Thump is the
fault locator compact and light weight, battery or mains powered solution for the fault location in MV or
LV cables. It is the perfect solution for areas of lower distribution density and failure rate. Low
resistance
testers
Earth loop
tester
Calibration and repair service
PA9+ Power n O
n-sitepower quality analysis and data retrieval without a computer. Intelligent download
Megger and many of its distributors operate fully traceable
quality analyser and real time graphical trending of Harmonics, THD and TDD. It now has a faster digital signal
calibration and repair facilities ensuring your instrument Earth
processor, 12 MB of internal, non-volatile memory, and incorporated auxiliary power input resistance
continues to provide the high standard of performance and testers
capabilities. Includes Metrosoft® software and remote communications.
workmanship you expect from Megger. These facilities are
complemented by a worldwide network of approved repair
and calibration companies, to offer excellent in-service care for Electrical
your Megger products. test kits
For information on having your instrument calibrated or
Sverker is the n S
VERKER has long been acknowledged as the single phase relay test of choice. A well repaired number please call +44 (0)1304 502 101.
most popular designed, rugged instrument SVERKER is the most popular relay tester because of its
single-phase Accessories
ease-of-use and unequalled reliability.
relay test set
contractors, it’s Megger. So when new legislation or rules are environmental management systems
introduced – whether it’s Part P of the Building Regulations in
Appliance
FRAX101 Sweep n F
ollowing an incident the quickest way to assess the condition of a transformer, before the UK, ITC BT03 in Spain, VDE 0100 in Germany, XP C16-600 in testers
frequency
returning it to service, is to run a FRA test. The FRAX101 is the smallest, most rugged France, RoHS, the WEEE Directive or IEC 60364, you can count
response
analyser instrument and it offers the highest dynamic range and accuracy. on Megger to put your interests first.
Established originally in the late 1800s, the company has been Cable fault
manufacturing test and measurement instruments designed locator
to perform preventive maintenance and troubleshooting for
decades. Megger products help customers all over the world
improve their efficiency, reduce costs, and meet standards. Network
It operates globally with dedicated field sales teams and performance
SMRT protective n S
MRT tester and AVTS® software from Megger raises the standard and lowers the weight for tester
relay test set the automatic testing and management of protective relay systems. SMRT offers traditional distributors located all over the world and manufacturing
manual and semi-automatic testing of the relay system whilst the AVTS package offers fully plants in the United States, Sweden and the United Kingdom.
automatic testing as well as relay maintenance schedule management. The commitment of Megger to industry is reflected in its Other
Megger
technical leadership and in being the first to design and products
introduce many key products.
About
Technical specifications are subject to change without notice. Megger