Professional Documents
Culture Documents
Multi-Blade Manual Balancing Damper: Application & Design
Multi-Blade Manual Balancing Damper: Application & Design
Job: DAMPERS
Mark: Dampers
Model: MBD-15
PRODUCT DETAILS
Frame Type Channel
Frame Thickness 16 ga galvanized steel 1.25 in.
Height max
Material Galvanized Steel (typical)
Blade Action Opposed
Linkage Material Steel
Axle Steel
Axle Bearings Synthetic
Extension Pins Polymer Width
Operator 0.500 in. locking manual quadrant with standoff Damper 5 in.
bracket Location
Sizing Nominal "A"
Sleeve
OPTIONS & ACCESSORIES Length
Clean Wrap No
Transition None
Standoff Bracket 1.5 in. • This drawing shows a general damper configuration and is not
Flange None intended to depict the exact configuration of all dampers
Union Label: No Preference in this submittal.
• Width and height dimensions are undersize 0.250 in.
• Damper includes 0.500 in. locking manual quadrant with 0.500
in.
diagonal reinforced pins that extend 3.500 in. beyond frame.
SUMMARY
ID # Tag Qty W (in.) H (in.) Act Qty Actuator Type CONFIGURATION
Drive Arrg: Sleeve Length: Sleeve Thickness:
11-1FEL-0 12.000 in. 20 ga
1-1 1 14.000 14.000 1 Manual Quadrant
Damper Location: Flanges:
3.500 in. NONE
C:\Users\sumin\Documents\JOB DE GREENHECK\DAMPERS.gfcj
CAPS 4.35.979 Generated by: suministroshvac.honduras@gmail.com Page 1 of 2
Printed Date: 09/10/2021
Job: DAMPERS
C:\Users\sumin\Documents\JOB DE GREENHECK\DAMPERS.gfcj
CAPS 4.35.979 Generated by: suministroshvac.honduras@gmail.com Page 2 of 2
Drive Arrangement Definition
On multi-blade dampers (except vertical blade and Face & Bypass), they are given a drive arrangement code
that helps describe the construction of the damper. The following breaks down what each number and letter
represents.
22-2FEL- 2
1 2 3 4 5 6 7
1 Number of sections wide
Damper Height
3 Number of actuators or manual quadrants
7 Number of jackshafts
Vertical blade and face & bypass dampers are given a configuration ID number that helps describe the
construction of the damper. See the following examples: