Professional Documents
Culture Documents
09 3 BOQ PHE Page 2305 To 2327
09 3 BOQ PHE Page 2305 To 2327
Item Rate in
Item Description Total Quantity Unit Amount in Rs.
Code Rs.
Note:
1.All the Non DSR items should be as per
manufacturer's specifications or technical
specifications specified in the tender
documents "with all necessary accessories
as required for complete installation" as per
direction of engineer in charge.
2. "Basic rate indicated against the sanitary
fixtures are excluding CP fittings and
accessories."
3. "Procurement of items with aesthetic
value and visibility shall be on prior
approval of Engineer in charge for specific
area of application."
Providing and Fixing Vitreous china Over 7.00 Nos. 23011.00 Each 1,61,077.00
Counter Wash Basin as per IS: 2556 (Part 4)
of approved size and shape, in white colour
of approved make and quality, including
making water and drain connections. The
wash basin shall consist of the following
and shall be with and without hot water
17.4
supply.All junctions shall be sealed with
silicon sealant. Rate shall include 32 mm dia
CP brass waste coupling, 32 mm dia CP cast
brass bottle trap, union & extension piece of
required length and CP wall flange
complete including cutting & making good
the walls where required and as directed by
Providing and Fixing Vitreous china Over 35.00 Nos. 9685.00 Each 3,38,975.00
Counter Wash Basin as per IS: 2556 (Part 4)
of approved size and shape, in white colour
of approved make and quality, including
making water and drain connections. The
wash basin shall consist of the following
and shall be with and without hot water
supply.All junctions shall be sealed with
17.5
silicon sealant. Rate shall include 32 mm dia
CP brass waste coupling, 32 mm dia CP cast
brass bottle trap, union & extension piece of
required length and CP wall flange
complete including cutting & making good
the walls where required and as directed by
the Engineer -in - charge. (For Private
Toilets only) Basic Rate: Rs. 4525.00
Providing and Fixing Vitreous china Under 207.00 Nos. 8487.50 Each 17,56,913.00
Counter Wash Basin as per IS: 2556 (Part 4)
of approved size and shape, in white colour
of approved make and quality, including
making water and drain connections. The
wash basin shall consist of the following
and shall be with and without hot water
supply.All junctions shall be sealed with
17.6
silicon sealant. Rate shall include 32 mm dia
CP brass waste coupling, 32 mm dia CP cast
brass bottle trap, union & extension piece of
required length and CP wall flange
complete including cutting & making good
the walls where required and as directed by
the Engineer -in - charge. (For Common
Toilets only) Basic Rate: 3630.00
Providing, fixing, testing & Commissioning 10.00 Nos. 5453.90 Each 54,539.00
of approved make half pedestal wash basin
including making water and drain
connections, with heavy duty type
concealed M.S.wall brackets with 3 hole
fixing and SS screws to support the basin or
17.8
hitech supports, 32 mm dia. CP waste
Coupling, 32 mm dia.CP bottle trap with
extension pipe. The rate includes all
necessary connection charges as per product
detail to the satisfaction and as directed by
the Engineer In Charge.
Providing and fixing white vitreous china 96.00 Nos. 10425.75 Each 10,00,872.00
wall hung urinal with back inlet of approved
shape and size, having water inlet from back
side, wall flange with seal, hanger & screws,
including fixing to wall and connecting the
17.9 inlet spud with the sensor flush valve (To be
paid separately) and discharge outlet with
the sanitary pipes, complete as per
manufacturers specification and direction of
Engineer-in-charge. (Basic rate of urinal-
Rs. 5170/- each)
Providing and Fixing in position CP brass 96.00 Nos. 13155.70 Each 12,62,947.00
Sensor operated Urinal Flush Valve
including AC Current adaptor, base flange,
including chasing the wall as per
requirement for fixing the valve in the wall,
finishing the wall as per civil requirements,
chasing the wall for connecting the valve to
17.10 the urinal, connecting pipe from the valve to
the urinal, extended wires for connecting
with the power source above the false
ceiling level, PVC conduits for concealing
the wires, as per approved make, including
testing the installation, complete as
approved by Engineer in Charge. (Basic
rate of valve- Rs. 8733/- each)
Providing and Fixing in position CP brass 226.00 Nos. 14506.30 Each 32,78,424.00
Sensor operated Wall mounted Spout with
AC Current adaptor, having hot and cold
water mixing facility, with base flange,
including chasing the wall as per
requirement for fixing the faucet in the wall,
17.11
finishing the wall as per civil requirements,
wires for connecting with the power source
below the counter, as per approved make,
including testing the installation, complete
as approved by Engineer in Charge. (Basic
rate of spout- Rs. 9742/- each)
Providing and Fixing in position CP brass 59.00 Nos. 7970.00 Each 4,70,230.00
Sensor operated Table mounted pillar cock
with in-built rechargable batteries, having
foam flow technology, having hot and cold
mixing facility, including base flange,
17.12 fixing the faucet on the counter, finishing
the counter as per civil requirements, as per
approved make, including testing the
installation, complete as approved by
Engineer in Charge. (Basic rate of pillar
cock- Rs. 6000/- each)
Providing and fixing Stainless Steel A ISI 22.00 Nos. 5948.37 Each 1,30,864.00
304 (18/8) kitchen sink as per IS:13983 with
C.I. brackets and stainless steel plug 40 mm,
including painting of fittings and brackets,
17.14 cutting and making good the walls wherever
required
Kitchen sink with drain board: Size -
510x1040 mm bowl depth 250 mm
Pantry sink.
Providing and fixing Stainless Steel A ISI 2.00 Nos. 4231.66 Each 8,463.00
304 (18/8) kitchen sink as per IS:13983 with
C.I. brackets and stainless steel plug 40 mm,
including painting of fittings and brackets,
17.15 cutting and making good the walls wherever
required :
Kitchen sink without drain board: Size -
610x510 mm bowl depth 200 mm
For Janitor sink
Providing and Fixing in position CP brass 24.00 Nos. 707.90 Each 16,990.00
long nose bib cock of approved make and
quality, conforming to IS standards and
17.19 weighin not less that 810 grams, and as
approved and directed by the Engineer-in-
charge. (For Kitchen / Pantry Sink) - 15 mm
nominal bore
Providing and fixing of single C.P. Brass 255.00 Nos. 673.99 Each 1,71,867.00
17.27 toilet paper roll holder, at levels as directed
by the Engineer in charge.
100 mm diameter Ductile Iron Class K-7 169.00 meters 1109.89 meter 1,87,571.00
pipes
Fixing water meter and stop cock in G.I. 4.00 Nos 663.45 each 2,654.00
pipe line including cutting and threading the
18.13 pipe and making long screws etc. complete
(cost of water meter and stop cock to be paid
separately)
With common burnt clay F.P.S. (non 3.00 Nos 10001.48 each 30,004.00
18.23.1
modular) bricks of class designation 7.5
Providing orange colour safety foot rest of 960.00 Nos 482.23 each 4,62,941.00
minimum 6 mm thick plastic encapsulated
as per IS : 10910, on 12 mm dia steel bar
conforming to IS: 1786, having minimum
cross section as 23 mmx25 mm and over all
minimum length 263 mm and width as 165
mm with minimum 112 mm space between
protruded legs having 2 mm tread on top
surface by ribbing or chequering besides
necessary and adequate anchoring
18.25
projections on tail length on 138 mm as per
standard drawing and suitable to with stand
the bend test and chemical resistance test as
per specifications and having manufacture's
permanent identification mark to be visible
even after fixing, including fixing in
manholes with 30x20x15 cm cement
concrete block 1:3:6 (1 cement : 3 coarse
sand : 6 graded stone aggregate 20 mm
nominal size) complete as per design
Concealed Pipes
19.1.1 40 mm dia 523 meters 734.55 meter 3,84,170.00
Providing and fixing trap of self cleansing P 467 Nos 1133.25 each 5,29,228.00
Trap, in Structured Wall UPVC SWR / P.E.
/ P.P. non pressurized waste water piping as
laid down in DIN EN 12056 and DIN 1986-
19.3 100 and as per IS: 16098, of size 110mm
x110mm with rubber inserts of 3mm
thickness complete, including cost of
cutting and making good the walls and
floors :
Providing M.S. foot rests including fixing 500 Nos 456.74 each 2,28,370.00
with 20x20x10 cm cement concrete blocks
1:3:6 mix (1 - cment; 3 - coarse sand; 6 -
19.14
graded stone aggregate 20mm nominal size)
as per standard design: with 20x20 mm
square bar
Supplying, filling, spreading & leveling 151.00 cum 1313.28 cum 1,98,305.00
stone boulders of size range
5 cm to 20 cm, in recharge pit, in the
20.4
required thickness, for all leads
& lifts, all complete as per direction of
Engineer-in-charge
Supplying, filling, spreading & leveling 84.00 cum 1313.28 cum 1,10,316.00
gravels of size range 5 mm to
10 mm, in the recharge pit, over the existing
20.5 layer of boulders, in
required thickness, for all leads & lifts, all
complete as per direction
of Engineer-in-charge.
Supplying, filling, spreading & leveling 84.00 cum 1313.28 cum 1,10,316.00
coarse sand of size range 1.5
mm to 2 mm in recharge pit, in required
20.6
thickness over gravel layer,
for all leads & lifts, all complete as per
direction of Engineer -incharge.
Providing and fixing factory made RCC 28.00 Nos 1201.12 each 33,631.00
perforated drain covers having concrete of
strength not less than M-25, of size 1000 x
450 x 50 mm, reinforced with 8 mm
diameter four numbers longitudinal & 9
numbers cross sectional T.M.T. hoop bars,
20.8
including providing 50 mm diameter
perforations @ 100 to 125 mm center to
center, including providing edge binding
with M.S. flats of size 50 mm x 1.6 mm
complete, all as per direction of Engineer-
in-charge. (2 covers per recharge pit)
Supply & installation of Polymer based 320.00 Cum 14752.35 Cum 47,20,752.00
Rainwater Harvesting Modules
(Honeycomb design on each plate) of
approved make and design made up of
recycled polypropylene capable of taking
light vehicular movement upto atleast 30
tonnes / sqm with proper back filling &
plates combination, creating multiple spans
inside the module. These modules shall be
made from combination of large and small
20.9
plates along with the external locks. Each
large plate should have sufficient external
locking slots in order to give stability to the
tank. The tank should have optimum
connection & block stability using double
lock stability. Each tank shall be made of
multiple large and small plates. The design
of RWH system shall be submitted by the
contractor for approval of Engineer-in-
Charge prior to execution.
Providing and fixing of non woven 800.00 Sqm 809.10 Sqm 6,47,280.00
geotextile having thickness of 400 GSM,
having minimum tear strength of 250
ASTM D4533, Width wise atleast 215
ASTM D4533 having puncture strength of
1550 plus asper ASTM D6241 Having
20.10 elongation at Break of 57% plus as per
ASTM D 4595 in two layers, made out of
long fibres to hold the modules including
cutting, sizing, Heat welding and needle
punched for high porosity and proper
percolation. complete as per entire
satisfaction of engineer-in-charge.
Providing, fixing, installing, testing & 8.00 Nos 77628.50 Each 6,21,028.00
commissioning of of approved make and
design FRP based Microfilter with
minimum diameter of 750 mm and height
1000 mm having inlet and outlet of 150mm
20.11
dia with SS 304 mesh. Flow rate of
microfilter should be atleast 40 - 50 KL / Hr.
(FRP based RWH Filters should be GRIHA
Certified. The product should be registered
under GRIHA Criterions.