Professional Documents
Culture Documents
Handicap Water Closet (American Standard)
Handicap Water Closet (American Standard)
Handicap Water Closet (American Standard)
Client : Contractor :
Prepared By : Date
Handicap Water Closet (American
Submittal Title : : 29-Oct-2018
Standard)
SPECIFICATIONS REMARKS (IDENTIFY
REFERENCE, I.E. MATERIAL SOURCE ANY DEVIATIONS FROM
SPECIFICATION REQUIREMENT PROPOSED MATERIAL
SECTION, PAGE NO. (MFR. / SUPPLIER) SPECIFICATIONS &
.
ETC. JUSTIFY)
Section 15410 Proposed: American Standard Handicap Water Closet
Section 15410 Manufacturer:
Part 2.05 Water Closets Model: Madera Flowise 16-1/2" Height
Part 2.05 American Standard 3043.001 Elongated bowl only, top spud
Para. A
MEETS THE AMERICANS WITH DISABILITIES ACT
GUIDELINES AND ANSI A117.1 REQUIREMENTS FOR
ACCESSIBLE AND USABLE BUILDING FACILITIES – CHECK
LOCAL CODES.
A. Western Tank Type
1. General
1. General
a) Vitreous China Toilets
Pay Item No. Supplier: a) Vitreous China Toilets
1. Comply with ANSI A112.19.2M for hydraulic Complied
3-15.01.17 (a) Safana United Trading performance, water surface area, trap seal depth,
1. ASME A112.19.2-2008 / CSA B45.1-08 for Vitreous
4-15.01.16 (a) Co. China Fixtures
ballpass diameter and dimensions.
Note: We certify that all the requirements of the specification for the proposed product comply with the specifications.
Contractor :
3043.001/3248.001
1" N.P.T. OR 1"
FINISHED WALL C.W.T. SUPPLY
TO FLUSH VALVE
121mm
718mm (4-3/4 " ) 711mm
(28-1/4") (28 " )
419mm
(16-1/2 " )
338mm FINISHED
(13-5/16 " ) FLOOR
150mm
(5-7/8") 238mm
13mm (9-3/8 " )
(1/2 " )
254mm
(10 " ) C/L OF OUTLET
3249.001
FINISHED WALL
718mm
(28-1/4")
438mm
(17-1/4 " )
419mm
(16-1/2 " )
338mm
(13-5/16 " ) FINISHED 238mm
150mm FLOOR
(9-3/8 " )
(5-7/8")
13mm
(1/2 " )
254mm
(10 " ) C/L OF OUTLET
NOTES:
PRODUCT 3043 SHOWN, 3248 SAME EXCEPT WITH SLOTTED RIM FOR
BED PAN HOLDING.
TO COMPLY WITH AREA CODE GOVERNING THE HEIGHT OF VACUUM
BREAKER ON THE FLUSHOMETER VALVE, THE PLUMBER MUST
VERIFY DIMENSIONS SHOWN FOR SUPPLY ROUGHING.
THIS TOILET DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION
OF 254MM (10") AND A MAXIMUM DIMENSION OF 305MM (12") FROM
FINISHED WALL TO C/L OF OUTLET.
FLUSHOMETER VALVE NOT INCLUDED WITH FIXTURE AND MUST BE
ORDERED SEPARATELY. FLUSHOMETER VALVE REQUIREMENTS FOR
12" (305MM) ROUGH-IN: SWEAT EXTENSION NIPPLE IS REQUIRED.
REFER TO VALVE MANUFACTURER AND LOCAL CODES.
M108
© 2014 AS America Inc. Rev. 2/14
4 5
BOLT CAP
TAPERED
WASHER
CLOSET BOLT
WASHER NUT
INSTALL TOILET
CLOSET
BOLT
a. Position toilet squarely to wall and, with a rocking
motion, press bowl down fully on wax ring and flange.
Alternately tighten nuts until toilet is firmly seated on
floor.
If inspection of this AS America, Inc. (“American Standard”) plumbing product, within one year after its initial purchase, confirms that it is
defective in materials or workmanship, American Standard will repair or, at its option, exchange the product for a similar model.
This limited warranty applies only to the original purchaser and installation of these products. In the event of a limited warranty claim,
proof of purchase will be required—save sales receipt.
This limited warranty does not apply to local building code compliance. Since local building codes vary considerably, the purchaser of
this product should check with a local building or plumbing contractor to insure local code compliance
before installation.
This limited warranty is void if the product has been moved from its initial place of installation; if it has been subjected to faulty maintenance,
abuse, misuse, accident or other damages; if it was not installed in accordance with American Standard's instructions; or if it has been
modified in a manner inconsistent with the product as shipped by American Standard.
American Standard's option to repair or exchange the product under this limited warranty does not cover any labor or other costs of
removal or installation. IN NO EVENT WILL AMERICAN STANDARD BE LIABLE FOR THE COST OF REPAIR OR REPLACEMENT OF
ANY INSTALLATION MATERIALS, INCLUDING BUT NOT LIMITED TO, TILES, MARBLE, ETC. American Standard will not be
responsible for any other incidental or consequential damages attributable to a product defect or to the repair or exchange of a defective
product, all of which are expressly excluded from this limited warranty. This limited warranty does not cover any liability for consequential
or incidental damages, all of which are hereby expressly disclaimed, or the extension beyond the duration of this limited warranty of any
implied limited warranties, including those of merchantability or fitness for an intended purpose. (Some states or provinces do not allow
the exclusion or limitation of implied limited warranties, so this exclusion may not apply to you.)
This limited warranty gives you specific legal rights. You may have other statutory rights that vary from state to state or from province to
province, in which case this limited warranty does not affect such statutory rights.
7301114-100 Rev.C - 2 -
COMMERCIAL TOILET SEATS
5901
To Be Specified:
❏ Color: ❏
White 5905
To Be Specified:
❏ Color: ❏
White ❏ Linen ❏ Bone ❏ Silver
❏ Fawn Beige ❏ Black
5910
M95
© 2008 AS America Inc. Revised 2/08
COMMERCIAL TOILET SEATS
&
"
$
M96
© 2008 AS America Inc. Revised 2/08
™
Installation Instructions
5901
COMMERCIAL TOILET SEATS
5905
5910
MODELS: 5901 Elongated Heavy Duty
5905 Elongated Extra Heavy Duty
5910 Elongated Extra Heavy Duty Plus
Thank you for selecting American-Standard...the benchmark of fine quality for over 100 years. To ensure
that your installation proceeds smoothly — please read these instructions carefully before you begin.
Toilet Bowl
2 3
2. Properly align the toilet seat and install the 3. Tighten the nut on the hinge post using a
metal washer, metal lock washer and metal wrench. Caution: Do not over-tighten the
nut onto the hinge post. bolts as it could crack the toilet bowl.
When cleaning your toilet seat wash it with a mild, soapy water: rinse the seat thoroughly with clear
water and dry with a soft cloth.
Avoid detergents, disinfectants, or cleaning products in aerosol cans. Never use abrasive scouring
powders on your seat. Some bathroom chemicals and cosmetics may damage the seat’s finish.
After installation, check the tightness of the bolts from time to time to ensure a tight fit.
If inspection of this American Standard plumbing product, within one year after its initial installation, confirms that it
is defective in materials or workmanship, American Standard will repair or, at its option, exchange the product for a
similar model.
This limited warranty does not apply to local building code compliance; since local building codes vary
considerably, the purchaser of this product should check with a local building or plumbing contractor to ensure
local code compliance before installation.
This warranty shall be void if the product has been moved from its initial place of installation; if it has been
subjected to faulty maintenance, abuse, misuse, accident, or other damage; if it was not installed in accordance
with American Standard's instructions, or if it has been modified in a manner inconsistent with the product as
shipped by American Standard.
American Standard's option to repair or exchange the product under this warranty does not cover any labor or
other costs of removal or installation, nor shall American Standard be responsible for any other incidental or
consequential damages attributable to a product defect or to the repair or exchange of a defective product, all of
which are expressly excluded from this warranty. (Some states or provinces do not allow the exclusion or
limitation of implied warranties, so this exclusion may not apply to you.)
This warranty gives you specific legal rights. You may have other statutory rights that vary from state to state or
from province to province, in which case this warranty does not affect such statutory rights.
For service under this warranty, it is suggested that a claim be made through the contractor or dealer from or
through whom the product was purchased, or that a service request (including a description of the product model
and of the defect) be sent to the following address:
760119-100
2