Professional Documents
Culture Documents
Report Ista 3a
Report Ista 3a
EXECUTIVE SUMMARY:
DESCRIPTION OF PACKAGE:
Five panel folder master container was taped at seam joint and secured by plastic tape.
(Please see enclosed photos 1~4)
The sample product and the inner packaging materials were shown in the photos.
(Please see enclosed photos 5~17)
Note(s):
- The submitted sample was tested under WAL-MART’s requirement.
Bureau Veritas This report is governed by, and incorporates by reference, the Conditions of Testing as posted at the date of issuance of this report at
Consumer Products Services (VN) Ltd. http://cps.bureauveritas.com and is intended for your exclusive use. Any copying or replication of this report to or for any other person or
entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with
Lot C7-C9, Conurbation 2, Cat Lai Industrial respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or
Zone, District 2, Ho Chi Minh City, Vietnam characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our
report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days
Tel: 84-8-37421604~6 Fax: 84-8-37421603 from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such
website:www.bureauveritas.com/cps notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time
shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents.
Technical Report: (9616) 048-0092
FEBRUARY 20, 2016
Page 2 of 20
Technical questions:
Technical questions: Terry Nguyen, Tel: 848-37421-604 ~ 6; email: terry.nguyen@vn.bureauveritas.com
Technical questions: Ron Nguyen, Tel: 848-37421-604 ~ 6; email: ron.nguyen@vn.bureauveritas.com
TERRY NGUYEN
AUTHORIZE REPORT APPROVER
BV Lab Number: (9616) 048-0092
TEST PROTOCOL FOR Technician Name: VET
09070.1 - US Test Date: FEBRUARY 17, 2016
PACKAGED PRODUCT TRANSIT TESTING ISTA 3A (150 Reviewed By/Date: TN/ FEBRUARY 20, 2016
LBS. OR LESS) (V11)
Page 3 of 20
CPSD-HL-01057- Staples are not permitted in the construction of the carton except along
Hazards M PASS
MTHD / Visual the bottom or along the manufacturer's edge only. Steel strapping is not
permitted. Plastic strapping is permitted but the securing device / method
(i.e. Buckle) must not contain or create a sharp point or edge.
PERFORMANCE
[Applicable for Packaged-Products for Parcel Delivery System Shipments
70kg (150 lb) or Less (standard, small, flat or elongated)]
[TEST PROCEDURES]
ISTA 3A 2011 [Required for ISTA 3A compliance]
Temperature: 240C
Atmospheric preconditioning Sequence 1 / CPSD- /
Humidity: 58%
HL-09012-MTHD 12 hours preconditioning at ambient laboratory conditions of 20 - 40ºC
and 10-80% RH,
Record the ambient laboratory temperature and humidity prior to and
after conditioning.
[Applicable for Packaged-Products for Parcel Delivery System Shipments
70kg (150 lb) or Less (standard, small, flat or elongated)]
ISTA 3A 2011 [TEST PROCEDURES]
* Atmospheric conditioning Sequence 2 / CPSD- [Optional] [If requested] NT /
HL-09012-MTHD
Refer to client's requirement and atmospheric condition table in ISTA 3A.
If not specified, condition 100 °F (38 °C) and 85% RH for 72 hours.
BV Lab Number: (9616) 048-0092
TEST PROTOCOL FOR Technician Name: VET
09070.1 - US Test Date: FEBRUARY 17, 2016
PACKAGED PRODUCT TRANSIT TESTING ISTA 3A (150 Reviewed By/Date: TN/ FEBRUARY 20, 2016
LBS. OR LESS) (V11)
Page 5 of 20
Sample with top load shall be subjected to random vibration test in the
ISTA 3A 2011
following sequence
Vibration - random with top load Sequence 4 / CPSD- NA /
1. Face 3 on vibration system platform for 60 minutes.
HL-09012-MTHD
2. Face 4 on vibration system platform for 30 minutes.
3. Face 6 on vibration system platform for 30 minutes.
See note immediately after the last test row at protocol bottom for
Pass/Fail Criteria
[Applicable for Packaged-Products for Parcel Delivery System Shipments
70kg (150 lb) or Less (FLAT)]
Random With Load
ISTA 3A-2008
Sample with top load shall be subjected to random vibration test in the
following sequence
NA /
1. Face 3 on vibration system platform for 60 minutes.
2. Face 4 on vibration system platform for 30 minutes.
3. Face 6 on vibration system platform for 30 minutes.
See note immediately after the last test row at protocol bottom for
Pass/Fail Criteria
[Applicable for Packaged-Products for Parcel Delivery System Shipments
70kg (150 lb) or Less (SMALL)]
Random With Load
ISTA 3A-2008 Sample shall be placed in the center of mailbag 1 with dunnage packages
and be subjected to random vibration following the sequence below;
1. Face 1 of mailbag 1 on vibration test system platform with sand- NA /
filled mailbag on top for 30 minutes.
2. Face 2 of mailbag 1 on vibration system platform with sand filled
mailbag 2 on top for 30 minutes.
See note immediately after the last test row at protocol bottom for
Pass/Fail Criteria
[Applicable for Packaged-Products for Parcel Delivery System Shipments
70kg (150 lb) or Less (STANDARD)]
Random With Load
ISTA 3A-2008 M
Sample with top load shall be subjected to random vibration test in the
Top Load
following sequence
Face 3 down: 260 Lbs PASS
1. Face 3 on vibration system platform for 60 minutes.
Face 4 down: 120 Lbs
2. Face 4 on vibration system platform for 30 minutes.
Face 6 down: 45 Lbs
3. Face 6 on vibration system platform for 30 minutes.
See note immediately after the last test row at protocol bottom for
Pass/Fail Criteria
BV Lab Number: (9616) 048-0092
TEST PROTOCOL FOR Technician Name: VET
09070.1 - US Test Date: FEBRUARY 17, 2016
PACKAGED PRODUCT TRANSIT TESTING ISTA 3A (150 Reviewed By/Date: TN/ FEBRUARY 20, 2016
LBS. OR LESS) (V11)
Page 6 of 20
Test sample for 30 minutes without top load and with face 3 on vibration NA /
system platform.
See note immediately after the last test row at protocol bottom for
Pass/Fail Criteria
[Applicable for Packaged-Products for Parcel Delivery System Shipments
Random Without Load
ISTA 3A-2008 70kg (150 lb) or Less (SMALL)]
Test sample for 30 minutes without top load and with face 3 on vibration M PASS
system platform.
See note immediately after the last test row at protocol bottom for
Pass/Fail Criteria
[Applicable for Packaged-Products for Parcel Delivery System Shipments
ISTA 3A 2011
70kg (150 lb) or Less (SMALL)]
Shock -drop Sequence 3 / CPSD- NA /
HL-09012-MTHD
{see corresponding table T-0027 at the end of this protocol}
[[Applicable for Packaged-Products for Parcel Delivery System
Shipments 70kg (150 lb) or Less (ELONGATED)]
With opposite edge of face 3 placed on support, drop test edge from a
ISTA 3A 2011
height of 8 inches (200 mm). Test in sequence;
Shock - rotational edge drop Sequence 7 / CPSD- NA /
1. Longest edge
HL-09012-MTHD
2. Next longest edge radiating 90º from 1.
3. Opposite edge of 2.
See note immediately after the last test row at protocol bottom for
Pass/Fail Criteria
BV Lab Number: (9616) 048-0092
TEST PROTOCOL FOR Technician Name: VET
09070.1 - US Test Date: FEBRUARY 17, 2016
PACKAGED PRODUCT TRANSIT TESTING ISTA 3A (150 Reviewed By/Date: TN/ FEBRUARY 20, 2016
LBS. OR LESS) (V11)
Page 7 of 20
See note immediately after the last test row at protocol bottom for
Pass/Fail Criteria
BV Lab Number: (9616) 048-0092
TEST PROTOCOL FOR Technician Name: VET
09070.1 - US Test Date: FEBRUARY 17, 2016
PACKAGED PRODUCT TRANSIT TESTING ISTA 3A (150 Reviewed By/Date: TN/ FEBRUARY 20, 2016
LBS. OR LESS) (V11)
Page 8 of 20
See note immediately after the last test row at protocol bottom for
Pass/Fail Criteria
BV Lab Number: (9616) 048-0092
TEST PROTOCOL FOR Technician Name: VET
09070.1 - US Test Date: FEBRUARY 17, 2016
PACKAGED PRODUCT TRANSIT TESTING ISTA 3A (150 Reviewed By/Date: TN/ FEBRUARY 20, 2016
LBS. OR LESS) (V11)
Page 9 of 20
See note immediately after the last test row at protocol bottom for
Pass/Fail Criteria
[Applicable for Packaged-Products for Parcel Delivery System Shipments
70kg (150 lb) or Less (ELONGATED)]
Drop hazard box from 16 inches (400 mm) above face 1 of sample.
Hazard box shall impact the midpoint across the longest dimension of
face 1. Drop hazard box's angle iron bottom edge shall be parallel to
ISTA 3A 2011
shortest dimension of face 1.
Shock - bridge impact Sequence 9 / CPSD- NA /
Sample shall be placed on two support blocks.
HL-09012-MTHD
Note: The blocks used for the Bridge Impact Test for Elongated Package
Configurations shall be positioned so that they are flush with the carton
ends.
See note immediately after the last test row at protocol bottom for
Pass/Fail Criteria
BV Lab Number: (9616) 048-0092
TEST PROTOCOL FOR Technician Name: VET
09070.1 - US Test Date: FEBRUARY 17, 2016
PACKAGED PRODUCT TRANSIT TESTING ISTA 3A (150 Reviewed By/Date: TN/ FEBRUARY 20, 2016
LBS. OR LESS) (V11)
Page 10 of 20
Note:
Pass/fail criteria = After sequential completion of all required tests, there shall be no damage to the package box and the product(s) contained within the package box.
Each of the following cases constitutes "damage":
Puncture of package box greater than 9 square inches or 10% of the damaged box surface,
Failure of the tape or seal,
Any part(s) escape the package box,
Any damage (even the slightest scratch, chip, dent, or marking) to the actual product.
Key:
* Additional Charge For This Test
** Manadatory Requirement
# By Request Only
Result Key:
C Claimed
R Recorded
M Meets
NM Does Not Meet
NA Not Applicable
NT Not Tested
Rating Key:
PASS Pass
FAIL Fail
BV Lab Number: (9616) 048-0092
TEST PROTOCOL FOR Technician Name: VET
09070.1 - US Test Date: FEBRUARY 17, 2016
PACKAGED PRODUCT TRANSIT TESTING ISTA 3A (150 Reviewed By/Date: TN/ FEBRUARY 20, 2016
LBS. OR LESS) (V11)
Page 11 of 20
Image Appendix
T-0031
Photos
Required For
Transit Test
Reporting.jpg
BV Lab Number: (9616) 048-0092
TEST PROTOCOL FOR Technician Name: VET
09070.1 - US Test Date: FEBRUARY 17, 2016
PACKAGED PRODUCT TRANSIT TESTING ISTA 3A (150 Reviewed By/Date: TN/ FEBRUARY 20, 2016
LBS. OR LESS) (V11)
Page 12 of 20
T-0023 ISTA
3A-Elongated
Packaged-
Individual-8-
Drops.jpg
BV Lab Number: (9616) 048-0092
TEST PROTOCOL FOR Technician Name: VET
09070.1 - US Test Date: FEBRUARY 17, 2016
PACKAGED PRODUCT TRANSIT TESTING ISTA 3A (150 Reviewed By/Date: TN/ FEBRUARY 20, 2016
LBS. OR LESS) (V11)
Page 13 of 20
T-0024 ISTA
3A-Elongated
Packaged-
Individual-9-
Drops.jpg
BV Lab Number: (9616) 048-0092
TEST PROTOCOL FOR Technician Name: VET
09070.1 - US Test Date: FEBRUARY 17, 2016
PACKAGED PRODUCT TRANSIT TESTING ISTA 3A (150 Reviewed By/Date: TN/ FEBRUARY 20, 2016
LBS. OR LESS) (V11)
Page 14 of 20
T-0025 ISTA
3A-Flat
Packaged-
Individual-8-
Drops.jpg
BV Lab Number: (9616) 048-0092
TEST PROTOCOL FOR Technician Name: VET
09070.1 - US Test Date: FEBRUARY 17, 2016
PACKAGED PRODUCT TRANSIT TESTING ISTA 3A (150 Reviewed By/Date: TN/ FEBRUARY 20, 2016
LBS. OR LESS) (V11)
Page 15 of 20
T-0026 ISTA
3A-Flat
Packaged-
Individual-9-
Drops.jpg
T-0027 ISTA
3A-Small
Packaged-
Individual-9-
Drops.jpg
BV Lab Number: (9616) 048-0092
TEST PROTOCOL FOR Technician Name: VET
09070.1 - US Test Date: FEBRUARY 17, 2016
PACKAGED PRODUCT TRANSIT TESTING ISTA 3A (150 Reviewed By/Date: TN/ FEBRUARY 20, 2016
LBS. OR LESS) (V11)
Page 16 of 20
T-0028 ISTA
3A-Small
Package-
Drop in a
Bag-7-
Drops.jpg
T-0029 ISTA
3A-Standard
Packaged-
Individual-8-
Drops.jpg
BV Lab Number: (9616) 048-0092
TEST PROTOCOL FOR Technician Name: VET
09070.1 - US Test Date: FEBRUARY 17, 2016
PACKAGED PRODUCT TRANSIT TESTING ISTA 3A (150 Reviewed By/Date: TN/ FEBRUARY 20, 2016
LBS. OR LESS) (V11)
Page 17 of 20
T-0030 ISTA
3A-Standard
Packaged-
Individual-9-
Drops.jpg
No. Of Samples Required for Complete Testing - Client Approval: SEPTEMBER 22,
2014 / Kelly
No. Of (Fully Packed) Cartons For Transit 1
Nasradinaj
Testing:
Creation Date: JUNE 28, 2007
No. Of Working Days For Complete Testing: - No. (7 day rush = 40% No. Of Working Days
SEPTEMBER 22,
For Complete Testing (with optional Last Revision Date:
2014
Conditioning): 10-13Days For Complete
Pricing Review Date:
Testing (without optional Conditioning):
Technical Review
10
Date:
Technical Report: (9616) 048-0092
FEBRUARY 20, 2016
Page 18 of 20
PACKAGING PHOTO
Photo 1 Photo 2
Photo 3 Photo 4
Photo 7 Photo 8
Photo 9 Photo 10
Photo 11 Photo 12
Technical Report: (9616) 048-0092
FEBRUARY 20, 2016
Page 20 of 20
Photo 13 Photo 14
Photo 15 Photo 16
Photo 17