|
°
a
mm
ay
3
Product Data Sheet - Coatings
CERAMOL’ 258
Water based ceramic coating for the prevention metal adhesion and
penetration in all ferrous and non-ferrous alloys.
Application CERAMOL 258 isa zircon silicate coating with special additives, which prevent toa large
extent, the edhesion and penetration of molten metals. CERAMOL 258 can be used to
protect crucibles during pouring and transport ladles prolonging the service life. Fumace
tolls and cast ion tipper ladles can also be coated in CERAMOL 258, the coated items are
practically in as-new condition at each filling. CERAMOL 258 can be used in ferrous
‘eastings to protect against metal penetation and bum on in any hot spot area, including
riser contact and chromite faced areas.
Viscosity in supplied state ‘Approximately 86 ps
Suspension after 24 hours Maximum 23%
Density 25 g/ml
Colour Beige
Baume Ho"
Properties CERAMOL 258 is supplied ready for use. It can be diluted with water if required to
‘improve the application properties and is best applied by brush, swab, spray or dip, extra
dilution with water may be required for spray or dip application. For fumace tools and all
refractories the best results are achieved by heating the surface to & maximum temperature
ff 100°C. Above this temperature there may be issues with the CERAMOL 258 not
adhering correctly as the steam escaping from the CERAMOL 258 while drying, will
disrupt the bonding. Thick coating layer can be achieved by multiple applications allowing
the coating to dry between applications. CERAMOL 288 can be applied to any bonded
sand surface by brush as supplied; CERAMOL 258 must be dried thoroughly before
‘coming in contact with molten metal.
Packing, 25 kg drums:
Storage Storage lif approximately sx (6) months.
Further Remarks The data given in this leaflet are guidelines and donot represent a specication.
Quality Controt Specitiato
Description Wait [Lower | Upper
Density “gint [2.50 [2:55
Baume °c [90 [110]
Viscosity 3s [40160
Health and Safety For further information consult the Material Sefery Data Sheet No.4821-78
Precautions
Revision No.0 Issue Date: 27.05.05 Authorised by: David Hughes Zewee” “/e57
3 Revision Dae: 18.1005 f
Form 1069-0999 Page
Foseco Pty Limited. ABN 63 000 227 609.7 Stuart Street, Padstow NSW 2211 Australia ai 4
Telaphone (02) 9914 5500. Facsimile (02) 9914 8547 eo ate
Internet htpwwnfoseco.com au Seo
‘ogo Trace a