Professional Documents
Culture Documents
Report Part 2
Report Part 2
The satisfaction that one gets on completion of a task cannot be fully enjoyed without
mentioning the people who made it possible. I am very much grateful to the almighty, who
helped me all the way moulded me into what today I am today.
I express my sincere thanks and gratitude to honorable chairman Mr. Sajeev Vattoly,
Head of the department Mr. Arun k s and Executive chairman Mrs. Dally Sajeev for all the
help they have provided in accomplishing this task.
I convey my kind regards and thanks to beloved principal, Prof. V.S. PRADEEPAN,
who motivated me to take up the seminar for having provided the suitable environment to
work with.
I express my sense of gratitude and sincere thanks to the Head of Department, also my
seminar guide, Mr .JOSEPH PAPPACHAN, Assistant Professor, Department of mechanical
Engineering for his valuable guidance in the preparation throughout the period of work.
My sincere thanks to all the classmates, Teaching, Non-Teaching staff members and
the well-wishers for their constant support and co-operation all the time.
i
TABLE OF CONTENTS
Title Page
Ⅰ. LIST OF FIGURES........................................................................................ iv
Ⅱ. LIST OF TABLES.....................................................................................................v
Ⅲ. ABSTRACT.................................................................................................... vi
1. INTRODUCTION............................................................................................01
1.1 GENERAL
2. LITERATURE REVIEW
3. COMPONENTS DESCRIPTION
3.1. MOTOR
3.2. GEAR
3.3. FRAME
3.4. SHREDDER
3.5. SQUEEZER
3.6. HOPPER
ii
3.7. BEARING
3.8. SHAFT
3.10. SWITCH
3.11. BARREL
4. DESIGN CALCULATION
4.1. MOTOR
5. DESIGN
6. MANUFACTURING PROCEDURE
6.1. INTRIDUCTION
6.2.5. ASSEMBLY
6.2.6. PAINTING
7. PARTS FABRICATION
8. WORKING PROCEDURE
9.1. ADVANTAGES
9.2. DISADVANTAGES
iii
10. LIST OF MATERIALS
12. CONCLUSION
REFERENCES
iv
LIST OF FIGURES
1.1 DRAWING
v
LIST OF TABLES
1 LIST OF MATERIALS
2 COST ESTIMATION
vi
ABSTRACT
In this machine we can shred and squeeze coconut . One shaft is used for shredding
and another for squeezing. First we shred the coconut using shredder. Then the shredded
coconut falls into the screw thread squeezer. Then the squeezer will squeeze the shredded
coconut and extract coconut milk from it. Then the milk from coconut is separated and
collected. The residue of coconut is separated, due to the rotation of the squeezer. This
machine makes the process of extracting milk from coconut easy and fast.
vi
i