Professional Documents
Culture Documents
Carreon's Group Highlighted
Carreon's Group Highlighted
Carreon's Group Highlighted
2 Local Literature
surface chemistry of the solder mask influence the rate of creep corrosion
(Hi po ma’am pretty, hindi na po pina-include ng aming Section Head na si sir Danilo
Miranda po ang ating mga related Literature na hindi daw po tumama sa ating Chapter
Literature at kung ilan na lang daw po ang percent ng natirang Related Literature po
natin)
vice versa.
designed to be larger than the declared PCB sizes to ensure that there will be
expulsion of the first and third phase which is the Brushing and Coating Stage.
The container catches excessive fluid expelled by the machine preventing the
Testing Results
Challenge in building the machine is finding the most appropriate materials that will
satisfy the prototype’s objective. The most efficient circular brush has a dimension of
4x4” the reason why the board size limitation is 4” in terms of width in catering utmost
efficacy of hardware to brush specified Copper PCB size. Any board that will exceed the
width limitation size of 4 inches is not allowable to enter the machine. And also, the
length of the board highly depends on the Linear holder with a maximum of 10”.
Every process on the prototype activates and turns “ON” only when the
Linear Holder reaches the specific cleaning phase (Brushing, Drying Coating,
and Curing). Upon the observation of the LCD and the IR detection of
Rectangular Holder, the hardware was tested fully functional with respect to
accurately deliver the Holder to the cleaning phases. After running both software
and hardware functions, the result of testing was successful. Each function and
Continuity Multimeter test to check the accuracy of the overall cleaning process
with the application of varnish to the electrical connections of the boards. The
holder’s grip from the rectangular container which leaves a mark on the Copper
board as well as the bubble formation from the expulsion of varnish from coating
phase was tested comprehensively via the Multimeter Test and recorded
properly that it does not affect the connection of copper layout design due to its
continuity test. It was properly documented that the boards respond to electrical
process.
APPENDICES
KATE DERIADA
Address: Road 9 St. Prk.2-A New Lower Bicutan Taguig City
E-mail: katederiada6@gmail.com
Phone#: 0977-180-6422
OBJECTIVE
An Electronics Technology student dedicated with a basic experience in electronics
prototype, service consumer electronics and circuit design aiming to apply in semiconductor or
manufacturing company in where academic electronics skills and gathered technological principles
Email: putrirusdah28@gmail.com
OBJECTIVE:
successful productive output individually or with a team. And to be able to enhance my analytical skills,
as well as the capacity to recognize problems and devise novel solutions by showcasing my abilities