Dam stability analysis using Swedish Slip Circle Method
Instruction:
All students should be participate on the group work
Maximum student per group is five There will be presentation and there may be personal interview
Available soil data
Embankment Clayey sand foundation Sandy clay
2 2 Cohesion C 5KN/m Cohesion C 20KN/m 0 0 Angle of internal friction φ 26 Angle of internal friction φ 22 3 3 Saturated unit weight ysat 19KN/m Saturated unit weight ysat 18KN/m -9 -9 Coefficient of permeability k 10 m/s Coefficient of permeability k 10 m/s
Dimensions of the section
Design Parameters Given Dimensions
Total dam height 40m (above the ground) Reservoir water level 37m (above the ground) Dam crest length 1m (assumed) Dam top width 10m u/s slope (V:H) 1:5 Downstream slope (V:H) 1:3 Length of horizontal filter 22m Radius of critical slip circle ….m measures it. Depth of foundation 20m (below ground)
For flow net the following data are shown:
Number of flow channels, Nf=4.0
Total number of equipotential drops, Nd=10
Required:
Sketch the dam for given dimension
Determine the equation of phreatic line and sketch it on the section of the dam Sketch the flow net for the given number of channels and equipotential drops Determine the total volume of water that can pass through the body of dam Using fellenious principle, locate the critical point and draw the slip surface Divide the slip surface in to 11 equal slices and determine the stability of D/s slope during steady seepage (reservoir full) for the given radius of critical slip circle.
Hydraulic Tables; The Elements Of Gagings And The Friction Of Water Flowing In Pipes, Aqueducts, Sewers, Etc., As Determined By The Hazen And Williams Formula And The Flow Of Water Over The Sharp-Edged And Irregular Weirs, And The Quantity Discharged