Professional Documents
Culture Documents
02pages From WaterGEMS QuickStart
02pages From WaterGEMS QuickStart
To simulate the connection to the larger water distribution network, you will draw a
reservoir connected to a pump, and enter a pump curve. The pump curve will be
developed from 3 data points: the static pressure of the distribution system at the
connection point (converted to head), partial hydrant flow and pressure (converted to
head), and full hydrant flow and pressure (converted to head). This method simulates
the larger water distribution system's ability to deliver a range of flows and related
pressures to the new pipe network with a single pump curve. Representing the
network connection in this way is an approximation of actual conditions and may not
be representative for all operational conditions. Care should be taken to ensure all
applicable operating conditions are addressed.