Rosemount 765 Multiple Spot

Sheet Date 01/24/2022

Temperature Sensor Customer Pemex

Site Deer Park-TX

Links: Order ORD420363

565/566/765/614 Product Data Sheet PO Exportech PO-2524

2240 Reference Manual Submitted by T.Whittington

Probe P1 Product Description Multiple Spot Temperature with integrated Water Level Sensor Approved By

P2 Length (L*) (See notes, drawing) L: 587 inches LO: 601 inches Signature
P3 Sheath Type A: 1 -in. AISI 316

P4 Tank Connection C: 2 in. Class 150 (SST AISI 316 ) Flat/Raised Face

P5 Temperature Sensor Wiring 4: 4-Wire Individual Return (Max 10 elements)

P6 Number of Temperature Spot Elements 06

P7 Element Type P: PT-100

P8 Temperature Accuracy Class 1: 1/6 DIN Class B

P9 Temperature Range 1: 0 to +120 °C (+32 to +248 °F)

P10 Lead Wires 00: For integrated installation with Rosemount 2240S

P11 Water Level Sensor H10: Open. 1000 mm (39 in.) range.

Options P12 Certificates Q4: Calibration Certificate

None

Q8: Material traceability certificate per EN 10204 3.1

None

None

Anchor Weight Special: Slim Top Weight

Vapor Boot None

Hose Kit None

Adapter None

Tag Plate None

Sensor Calibration X6: Calibration at 80°C (+176°F)

Extended Warranty None

Spot P13 Placement of Temperature Spots Choose Spot Locations: (enter inches/numbers only)
Placement
T1 0 T9 0
T1 is always closest to the bottom of the tank. T2 0 T10 0
T1 recommended minimum distance 36" from floor. T3 0
Last spot recommended 36" below High High setting. T4 0
Spots should be evenly spaced between the T5 0
top and bottom spot. T6 0
Recommend placement minimum 36" from tank wall. T7 0
Redundant spots will be numbered T1/T2 , T3/T4 etc. T8 0
Service Details Tag No. TT-2132

Vessel No.

P & ID No.

Area Classification

Max temperature

Dielectric const.
Fluid
Manufacturer Emerson Rosemount Tank Gauging
Rosemount 765 Sensor Model Code
Rosemount 765 Multiple Spot Temperature Sensor Description:
Slim Top Weight Part#: 304-0873-5: 11#, 30.8" x 1.9"

Additional Notes:

Note: P2: The Length (L) is measurement from top of mounting nozzle to bottom of floor. Measurement must be accurate. Probe allows for >5" of adjustment.
*Please note that lead time is 4-6 weeks after receipt of this signed approval. Since all sensors are custom made, after receiving a PO, the approval form will be sent to the customer
to be reviewed, signed and returned before we can place the order. The final part number will be different to accommodate our vendor and the difference will be noted in the
description.

RTG 765 revised OCT 2021